The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Novel Bidirectional Snubberless Naturally Commutated Soft-Switching Current-Fed Full-Bridge Isolated DC/DC Converter for Fuel Cell Vehicles
Abstract
A novel naturally clamped zero-current commutated soft-switching bidirectional current-fed full-bridge isolated dc/dc converter is proposed. This proposed secondary-modulation technique naturally clamps the voltage across the primary-side devices with zero-current commutation, eliminating the necessity for active-clamp circuit or passive snubbers. Switching losses are reduced significantly owing to zero-current switching of primary-side devices and zero-voltage switching of secondary-side devices. Soft switching and voltage clamping are inherent and load independent. The voltage across primary-side devices is independent of duty cycle with varying input voltage and output power and clamped at rather low reflected output voltage, enabling the use of semiconductor devices of low voltage rating. These merits make the converter promising for fuel cell vehicles application, front-end dc/dc power conversion for fuel cell inverters, and energy storage. Steady-state operation, analysis, design, simulation results using PSIM 9.0.4, and experimental results are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Khaligh, A., & Li, Z. (2010) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2010.2047877 · Cited by 1,817
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
Analysis and Design of High-Frequency Isolated Dual-Bridge Series Resonant DC/DC Converter
Li, X., & Bhat, A. K. S. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2034662 · Cited by 493
Cited by
Industrial Electronics for Electric Transportation: Current State-of-the-Art and Future Challenges
Williamson, S. S., Rathore, A. K., & Musavi, F. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2409052 · Cited by 527
Self-citationOptimized Operation of Current-Fed Dual Active Bridge DC–DC Converter for PV Applications
Shi, Y., Li, R., Xue, Y., & Li, H. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2432093 · Cited by 298
Review of power electronics in vehicle-to-grid systems
Sharma, A., & Sharma, S. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.022 · Cited by 261
Comparative analysis of bidirectional three-level DC–DC converter for automotive applications
Dusmez, S., Hasanzadeh, A., & Khaligh, A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336605 · Cited by 204
A SiC Bidirectional LLC On-Board Charger
Li, H., Wang, S., Zhang, Z., Tang, J., Ren, X., & Chen, Q. (2019) · 2019 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2019.8722324 · Cited by 32
Metadata
- Authors
- Xuewei, P., & Rathore, A. K.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2014-05
- Volume
- 61
- Issue
- 5
- Pages
- 2307-2315
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2059098247
- Cited by
- 246
- References
- 3
- FWCI
- 13.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Novel Bidirectional Snubberless Naturally Commutated Soft-Switching Current-Fed Full-Bridge Isolated DC/DC Converter for Fuel Cell Vehicles. https://app.cochat.ai/papers/10.1109/tie.2013.2271599
- The paper
- Xuewei, P., & Rathore, A. K. (2014). Novel Bidirectional Snubberless Naturally Commutated Soft-Switching Current-Fed Full-Bridge Isolated DC/DC Converter for Fuel Cell Vehicles. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2013.2271599
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.