The DOI matches its Crossref record.
Study of Nonsingular Fast Terminal Sliding-Mode Fault-Tolerant Control
Abstract
This paper studies fault-tolerant control (FTC) designs based on nonsingular terminal sliding-mode control and nonsingular fast terminal sliding-mode control (NFTSMC). The proposed active FTC laws are shown to be able to achieve fault-tolerant objectives and maintain stabilization performance even when some of the actuators fail to operate. In comparison to existing sliding-mode control (SMC) fault-tolerant designs, the proposed schemes not only can retain the advantages of traditional SMC, including fast response, easy implementation, and robustness to disturbances/uncertainties, but also make the system states reach the control objective point in a finite amount of time. Moreover, they also resolve the potential singularity phenomena in traditional terminal and faster terminal SMC designs; meanwhile, the proposed NFTSMC fault-tolerant scheme also possesses the benefit of faster state convergence speed of NFTSMC. Finally, the proposed analytical results are also applied to the attitude control of a spacecraft. Simulation results demonstrate the benefits of the proposed schemes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Van, M., Ge, S. S., & Ren, H. (2017) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2016.2555307 · Cited by 486
Van, M., Mavrovouniotis, M., & Ge, S. S. (2019) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2017.2782246 · Cited by 478
Improved non-singular fast terminal sliding mode control with disturbance observer for PMSM drives
Xu, B., Zhang, L., & Ji, W. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3083925 · Cited by 428
Adaptive Speed Control of PMSM Drive System Based a New Sliding-Mode Reaching Law
Junejo, A. K., Xu, W., Mu, C., Ismail, M. M., & Liu, Y. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2986893 · Cited by 380
Real-time fault diagnosis and fault-tolerant control
Gao, Z., Ding, S. X., & Cecati, C. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417511 · Cited by 308
Finite-Time Continuous Terminal Sliding Mode Control of Servo Motor Systems
Hou, H., Yu, X., Xu, L., Rsetam, K., & Cao, Z. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2931517 · Cited by 265
Phan, V. D., Vo, C. P., Dao, H. V., & Ahn, K. K. (2021) · IEEE Access · doi:10.1109/access.2021.3059947 · Cited by 58
Fang, X., Cheng, R., Cheng, S., & Fan, Y. (2024) · International Journal of Control, Automation and Systems · doi:10.1007/s12555-022-0594-6 · Cited by 17
“In [30-32], a fault-tolerant sliding mode controller makes the system have fast response, strong robustness, easy implementation, and effectively solve the singular phenomenon.”
Metadata
- Authors
- Xu, S. S.-D., Chen, C.-C., & Wu, Z.-L.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015
- Pages
- 1-1
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2046045373
- Cited by
- 243
- References
- 0
- FWCI
- 18.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.