The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Real-time fault diagnosis and fault-tolerant control
Open accessAbstract
This "Special Section on Real-Time Fault Diagnosis and Fault-Tolerant Control" of the IEEE Transactions on Industrial Electronics is motivated to provide a forum for academic and industrial communities to report recent theoretic/application results in real-time monitoring, diagnosis, and fault-tolerant design, and exchange the ideas about the emerging research direction in this field. Twenty-three papers were eventually selected through a strict peer-reviewed procedure, which represent the most recent progress on real-time fault diagnosis, fault-tolerant control design, and their applications. Twelve selected papers pay attention on fault diagnosis methods and applications, and the other eleven papers are concentrated on realtime fault-tolerant control and applications. We are going to overview the selected papers following fault diagnosis techniques and fault-tolerant control techniques, sequentially.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Robust Model-Based Fault Diagnosis for Dynamic Systems
Chen, J., & Patton, R. J. (1999) · The International Series on Asian Studies in Computer and Information Science · doi:10.1007/978-1-4615-5149-2 · Cited by 4,262
Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy
Frank, P. M. (1990) · Automatica · doi:10.1016/0005-1098(90)90018-d · Cited by 3,545
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
Self-citationDiagnosis and Fault-Tolerant Control
Blanke, M., Kinnaert, M., Lunze, J., & Staroswiecki, M. (2003) · Springer eBooks · doi:10.1007/978-3-662-05344-7 · Cited by 2,789
A survey of design methods for failure detection in dynamic systems
Willsky, A. S. (1976) · Automatica · doi:10.1016/0005-1098(76)90041-8 · Cited by 2,153
A survey of design methods for failure detection in dynamic systems
(1977) · Microelectronics Reliability · doi:10.1016/0026-2714(77)90326-2 · Cited by 1,421
Survey of model-based failure detection and isolation in complex plants
Gertler, J. J. (1988) · IEEE Control Systems Magazine · doi:10.1109/37.9163 · Cited by 1,114
Gao, Z., Cecati, C., & Ding, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2419013 · Cited by 776
Self-citationModel-Based Fault Diagnosis Techniques: Design Schemes, Algorithms and Tools
Ding, S. X. (2013) · Advances in Industrial Control · doi:10.1007/978-1-4471-4799-2 · Cited by 667
Self-citationIsermann, R. (2011) · doi:10.1007/978-3-642-12767-0 · Cited by 530 · cited 1×
“, see [1-9] and the references therein).”
Survey of fault-tolerance techniques for three-phase voltage source inverters
Mirafzal, B. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301712 · Cited by 440
Intelligent Particle Filter and Its Application on Fault Detection of Nonlinear System
Yin, S., & zhu, X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2399396 · Cited by 367
Adaptive Fault Tolerant Tracking Control for Linear and Lipschitz Nonlinear Multi-Agent Systems
Zuo, Z., Zhang, J., & Wang, Y. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2367034 · Cited by 319
Study of Nonsingular Fast Terminal Sliding-Mode Fault-Tolerant Control
Xu, S. S.-D., Chen, C.-C., & Wu, Z.-L. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2399397 · Cited by 243
Wang, Y., Song, Y.-D., & Lewis, F. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2399400 · Cited by 221
Distributed Real-Time Anomaly Detection in Networked Industrial Sensing Systems
Chen, P.-Y., Yang, S., & McCann, J. A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2350451 · Cited by 148
Fault Estimation and Fault Tolerant Control for Discrete-Time Dynamic Systems
Gao, Z. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2392720 · Cited by 136
Self-citationRotondo, D., Puig, V., Nejjari, F., & Romera, J. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2367002 · Cited by 124
Fault Diagnosis of a Wind Turbine Benchmark via Identified Fuzzy Models
Simani, S., Farsoni, S., & Castaldi, P. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2364548 · Cited by 108
Fault Diagnosis of Advanced Wind Turbine Benchmark using Interval-based ARRs and Observers
Sanchez, H., Escobet, T., Puig, V., & Odgaard, P. F. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2399401 · Cited by 101
Genduso, F., Cecati, C., Tommaso, A. O. D., Miceli, R., & Galluzzo, G. R. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2402645 · Cited by 99
Self-citationYang, D., Xu, Y., Wang, H., Zheng, T., Zhang, H., Zhang, H., & Gidlund, M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2402642 · Cited by 89
Online condition monitoring in micro-milling: A force waveform shape analysis approach
Zhu, K., Mei, T., & Ye, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2392713 · Cited by 70
Biswas, S. S., Srivastava, A. K., & Whitehead, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2362498 · Cited by 65
Zhu, J., Ge, Z., & Song, Z. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2396877 · Cited by 64
Li, X., Düşmez, S., Akin, B., & Rajashekara, K. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2364555 · Cited by 47
van der Geest, M., Polinder, H., Ferreira, J. A., Veltman, A., Wolmarans, J. J., & Tsiara, N. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2402641 · Cited by 32
Yang, Y. Z., Li, L., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2386297 · Cited by 25
Self-citation
Cited by
Xiong, R., Sun, W., Yu, Q., & Sun, F. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115855 · Cited by 481
A Robust Observer-Based Sensor Fault-Tolerant Control for PMSM in Electric Vehicles
Kommuri, S. K., Defoort, M., Karimi, H. R., & Veluvolu, K. C. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2590993 · Cited by 408
Gao, Z., Liu, X., & Chen, M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2497201 · Cited by 380
Self-citationDeep Learning-Based Intelligent Fault Diagnosis Methods Toward Rotating Machinery
Tang, S., Yuan, S., & Zhu, Y. (2020) · IEEE Access · doi:10.1109/access.2019.2963092 · Cited by 323
Wang, X.-B., Yang, Z.-X., & Yan, X.-A. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2787686 · Cited by 296
Metadata
- Authors
- Gao, Z., Ding, S. X., & Cecati, C.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-06
- Volume
- 62
- Issue
- 6
- Pages
- 3752-3756
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W1790534215
- Cited by
- 308
- References
- 28
- FWCI
- 28.15
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.