The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Design and Experimentation of WPT Charger for Electric City Car
Abstract
Wireless power transfer systems (WPTSs) with inductive coupling are advantageously used to charge the battery pack of electric vehicles. They basically consist of coil coupling, power supply circuitry connected to the transmitting side of the coil coupling, and power-conditioning circuitry connected to the receiving side of the coil coupling. This paper presents the design and implementation of a wireless power transfer (WPT) battery charger for an electric city car. A short overview on the working principles of a series-series resonant WPTS is given before describing in detail the design procedure of the power circuitry needed for its operation, i.e., an alternating-current-direct-current converter cascaded by a high-frequency inverter in the transmitting section and a diode rectifier cascaded by a chopper in the receiving section. The coil coupling with spiral coils is designed with the help of a finite-element-method code. A prototype of the WPT battery charger is built up according to the design results, and experiments that validate the design procedure are carried out.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Survey of Wide Bandgap Power Semiconductor Devices
Millán, J., Godignon, P., Perpiñà, X., Pérez-Tomás, A., & Rebollo, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268900 · Cited by 2,685 · cited 1×
“Due to the wide band gap of the SiC material and the consequent high breakdown voltage, these power devices benefit from a thinner voltage blocking layer that, together with the higher drift velocity of the free charges, reduces the parasitic capacitance of the power devices and gives them the ability of switching at…”
BackgroundDesign Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
Covic, G. A., & Boys, J. T. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2244536 · Cited by 1,223
Shin, J., Shin, S., Kim, Y., Ahn, S., Lee, S., Jung, G., Jeon, S.-J., & Cho, D.-H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2258294 · Cited by 856
Li, W., Zhao, H., Li, S., Deng, J., Kan, T., & Mi, C. C. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2384003 · Cited by 331
An Optimizable Circuit Structure for High-Efficiency Wireless Power Transfer
Chen, L., Liu, S., Zhou, Y. C., & Cui, T. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2179275 · Cited by 263
Unplugged But Connected: Review of Contactless Energy Transfer Systems
Kaźmierkowski, M. P., & Moradewicz, A. J. (2012) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2012.2220869 · Cited by 144
Cited by
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Mai, R., Liu, Y., Li, Y., Yue, P., Cao, G., & He, Z. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2665040 · Cited by 360
Song, K., Li, Z., Jiang, J., & Zhu, C. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2767099 · Cited by 337
A study on trends and developments in electric vehicle charging technologies
Hemavathi, S., & Shinisha, A. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105013 · Cited by 303
Opportunities and Challenges for Near-Field Wireless Power Transfer: A Review
Jawad, A. M., Nordin, R., Gharghan, S. K., Jawad, H. M., & Ismail, M. (2017) · Energies · doi:10.3390/en10071022 · Cited by 268
Metadata
- Authors
- Buja, G., Bertoluzzo, M., & Mude, K. N.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-12
- Volume
- 62
- Issue
- 12
- Pages
- 7436-7447
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2054400129
- Cited by
- 342
- References
- 7
- FWCI
- 15.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design and Experimentation of WPT Charger for Electric City Car. https://app.cochat.ai/papers/10.1109/tie.2015.2455524
- The paper
- Buja, G., Bertoluzzo, M., & Mude, K. N. (2015). Design and Experimentation of WPT Charger for Electric City Car. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2015.2455524
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.