Interturn Fault Diagnosis Strategy for Interior Permanent-Magnet Synchronous Motor of Electric Vehicles Based on Digital Signal Processor
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
An interturn short-circuit fault diagnosis strategy for the interior permanent-magnet synchronous motor (IPMSM) of an electric vehicle (EV) was presented. Online and offline detection methods were integrated into the diagnostic strategy to optimize diagnostic performance based on work cycle of an EV. An iterative form was used to reduce the computational load in online detection. It can be embedded into the control program of an inverter using no additional hardware. To improve the diagnostic performance, high-frequency voltage excitation was employed to amplify the fault information in offline detection. Good performance for a variety of work cycles was achieved by the integration of the two detection methods. Experiments were presented to verify the proposed diagnosis strategy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From PID to Active Disturbance Rejection Control
Han, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2011621 · Cited by 6,803 · cited 15×
“The stability criteria for the ESO are presented in the Appendix.”
MethodInfluentialTrends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
Da, Y., Shi, X., & Krishnamurthy, M. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2227808 · Cited by 303
Sarikhani, A., & Mohammed, O. A. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2222857 · Cited by 177 · cited 3×
“In [18], an observer based on a closed-loop control was designed to estimate the back EMF.”
BackgroundMethod
Cited by
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Haje Obeid, N., Battiston, A., Boileau, T., & Nahid-Mobarakeh, B. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2743419 · Cited by 98
“The developed identification method s are mostly based on frequency analysis [7-12].”
MethodChen, Z., Liang, D., Jia, S., Yang, L., & Yang, S. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3255249 · Cited by 72
“dq-axis currents or reference voltages [7], [8].”
Metadata
- Authors
- Du, B., Wu, S., Han, S., & Cui, S.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2016-03
- Volume
- 63
- Issue
- 3
- Pages
- 1694-1706
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2291339429
- Cited by
- 105
- References
- 4
- FWCI
- 7.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.