Fault-Tolerant Approach for Modular Multilevel Converters Under Submodule Faults
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The modular multilevel converter (MMC) is attractive for medium- or high-power applications because of the advantages of its high modularity, availability, and high power quality. The fault-tolerant operation is one of the important issues for the MMC. This paper proposed a fault-tolerant approach for the MMC under submodule (SM) faults. The characteristic of the MMC with arms containing different number of healthy SMs under faults is analyzed. Based on the characteristic, the proposed approach can effectively keep the MMC operation as normal under SM faults. It can effectively improve the MMC performance under SM faults but without the knowledge of the number of faulty SMs in the arm, without extra demand on communication systems, which potentially increases the reliability. The time-domain simulation studies with the PSCAD/EMTDC are conducted and a down-scale MMC prototype is also tested with the proposed approach. The study results show the effectiveness of the proposed approach.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tu, Q., Xu, Z., & Xu, L. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2011.2115258 · Cited by 1,387 · cited 6×
“The second harmonic circulating current is eliminated with the control in [29].”
BackgroundMethodInfluentialPou, J., Ceballos, S., Konstantinou, G., Agelidis, V. G., Picas, R., & Zaragoza, J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336608 · Cited by 406 · cited 1×
“According to [30] and [31], the capacitor voltages ucau and ucal in the upper and lower arms of phase A can be expressed as ⎪⎪⎨ ⎪⎪⎩ ucau = 1”
BackgroundReliability Calculation of Multilevel Converters: Theory and Applications
Richardeau, F., & Pham, T. T. L. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2211315 · Cited by 212
Active Redundant Submodule Configuration in Modular Multilevel Converters
Konstantinou, G., Pou, J., Ceballos, S., & Agelidis, V. G. (2013) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2013.2264950 · Cited by 152 · cited 4×
“Furthermore, the lower capacitor voltage in the proposed approach could increase the utilization ratio of the SMs in comparison with the conventional methods [20], [25], [26] under normal situation without faults, which could produce more voltage levels for a lower total harmonic distortion and improve power quality.”
BackgroundResultInfluential
Cited by
Modular Multilevel Converters for Transportation Electrification: Challenges and Opportunities
Ronanki, D., & Williamson, S. S. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2792330 · Cited by 345
“reserved SMs or hot reserved SMs [73], [74].”
BackgroundReliability and Cost based Redundancy Design for Modular Multilevel Converter
Tu, P., Yang, S., & Wang, P. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2793263 · Cited by 199
Open-Circuit IGBT Fault Detection and Location Isolation for Cascaded Multilevel Converters
Lamb, J., & Mirafzal, B. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2674629 · Cited by 170
“Regardless of the topology used, solid-state-based power converters are vital components of many advanced electrical systems [1]–[7], [12]–[19].”
BackgroundEnhanced Modular Multilevel Converter With Reduced Number of Cells and Harmonic Content
Vozikis, D., Adam, G. P., Rault, P., Despouys, O., Holliday, D., & Finney, S. J. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2904205 · Cited by 23
“ensuring continuous operation during cell failure [4], [5].”
Background
Metadata
- Authors
- Deng, F., Tian, Y., Zhu, R., & Chen, Z.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2016-11
- Volume
- 63
- Issue
- 11
- Pages
- 7253-7263
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2331730087
- Cited by
- 154
- References
- 4
- FWCI
- 9.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.