The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Practical Tracking Control of Robot Manipulators With Continuous Fractional-Order Nonsingular Terminal Sliding Mode
Abstract
This paper studies practical tracking control design of robot manipulators with continuous fractional-order nonsingular terminal sliding mode (CFONTSM) based on time-delay estimation (TDE). The proposed control design requires no detailed information about the robot dynamics, leading to an attractive model-free nature thanks to TDE, and ensures fast convergence and high tracking precision under heavy lumped uncertainties due to the FONTSM surface and fast-TSM-type reaching law. Stability of the closed-loop system and finite-time convergence are analyzed using Lyapunov stability theory. Comparative 2-DOF (degree of freedom) simulation and experiment results show that the proposed control design can ensure higher tracking precision and faster convergence compared with TDE-based continuous integer-order NTSM (CIONTSM) design in a wide range of speed; meanwhile, better performance is also observed compared with TDE-based IONTSM and FONTSM control designs using a boundary layer technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Continuous finite-time control for robotic manipulators with terminal sliding mode
Yu, S., Yu, X., Shirinzadeh, B., & Man, Z. (2005) · Automatica · doi:10.1016/j.automatica.2005.07.001 · Cited by 2,647
Non-singular terminal sliding mode control of rigid manipulators
Feng, Y., Yu, X., & Man, Z. (2002) · Automatica · doi:10.1016/s0005-1098(02)00147-4 · Cited by 2,322
Lewis, F. L., Dawson, D. M., & Abdallah, C. T. (1993) · Medical Entomology and Zoology · Cited by 1,253
Fast terminal sliding-mode control design for nonlinear dynamical systems
Yu, X., & Zhihong, M. (2002) · IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications · doi:10.1109/81.983876 · Cited by 893
Jin, M., Lee, J., Chang, P. H., & Choi, C. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024097 · Cited by 428
Terminal attractors for addressable memory in neural networks
Zak, M. (1988) · Physics Letters A · doi:10.1016/0375-9601(88)90728-1 · Cited by 302
FOMCON: Fractional-order modeling and control toolbox for MATLAB
Tepljakov, A., Petlenkov, E., & Belikov, J. (2011) · International Conference Mixed Design of Integrated Circuits and Systems · Cited by 295
Han, S. I., & Lee, J. M. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2253072 · Cited by 240
Robust Compliant Motion Control of Robot With Nonlinear Friction Using Time-Delay Estimation
Jin, M., Kang, S. H., & Chang, P. H. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.906132 · Cited by 235
Jin, M., Lee, J., & Ahn, K. K. (2015) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2014.2323897 · Cited by 220
Cited by
Van, M., Mavrovouniotis, M., & Ge, S. S. (2019) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2017.2782246 · Cited by 478
Qiao, L., & Zhang, W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2949007 · Cited by 453
Qiao, L., & Zhang, W. (2017) · IET Control Theory & Applications · doi:10.1049/iet-cta.2017.0016 · Cited by 290
Yang, C., Song, B., Xie, Y., Zheng, S., & Tang, X. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3239609 · Cited by 37
Wang, Y., Peng, J., Zhu, K., Chen, B., & Wu, H. (2020) · International Journal of Systems Science · doi:10.1080/00207721.2020.1808732 · Cited by 21
Self-citationTime Delay Control for Robot Manipulators With Prescribed Performance
Yang, P., Zhang, H., Meng, X., & Li, Q. (2025) · IEEE Control Systems Letters · doi:10.1109/lcsys.2025.3601662 · Cited by 2
Metadata
- Authors
- Wang, Y., Gu, L., Xu, Y., & Cao, X.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2016-10
- Volume
- 63
- Issue
- 10
- Pages
- 6194-6204
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2395392600
- Cited by
- 356
- References
- 13
- FWCI
- 29.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.