A Double-Scale, Particle-Filtering, Energy State Prediction Algorithm for Lithium-Ion Batteries
The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Abstract
In order for the battery management system (BMS) in an electric vehicle to function properly, accurate and robust indication of the energy state of the lithium-ion batteries is necessary. This robustness requires that the energy state can be estimated accurately even when the working conditions of batteries change dramatically. This paper implements battery remaining available energy prediction and state-of-charge (SOC) estimation against testing temperature uncertainties, as well as inaccurate initial SOC values. A double-scale particle filtering method has been developed to estimate or predict the system state and parameters on two different time scales. The developed method considers the slow time-varying characteristics of the battery parameter set and the quick time-varying characteristics of the battery state set. In order to select the preferred battery model, the Akaike information criterion (AIC) is used to make a tradeoff between the model prediction accuracy and complexity. To validate the developed double-scale particle filtering method, two different kinds of lithium-ion batteries were tested at three temperatures. The experimental results show that, with 20% initial SOC deviation, the maximum remaining available energy prediction and SOC estimation errors are both within 2%, even when the wrong temperature is indicated. In this case, the developed double-scale particle filtering method is expected to be robust in practice.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“It is well established that a battery's aging process is controlled by a variety of operating factors, including time of storage, the temperature of the battery, charging and discharging rates, and occurrences of excessive charging or overdischarging [84].”
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.032 · Cited by 1,923
Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.033 · Cited by 1,768 · cited 5×
“As the parameter identification and state estimation of lithium-ion batteries have been addressed at the normal temperature of 25 °C [1]–[5], [18], the SOC estimation and ERAE prediction at low or high temperatures are more worth researching, and are thus, analyzed in detail as follows.”
BackgroundMethodInfluentialHe, W., Williard, N., Osterman, M., & Pecht, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.040 · Cited by 1,105
Self-citationWaag, W., Fleischer, C., & Sauer, D. U. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.064 · Cited by 1,059 · cited 1×
“The authors in [11]–[13] provided more detailed SOC estimation method classifications.”
BackgroundA survey of convergence results on particle filtering methods for practitioners
Crisan, D., & Doucet, A. (2002) · IEEE Transactions on Signal Processing · doi:10.1109/78.984773 · Cited by 919 · cited 1×
“In this case, as the particle number N → +∞, both the state estimate χ̂k and parameter estimate θ̂ k will converge to the true values [27].”
BackgroundPrognostics methods for battery health monitoring using a bayesian framework
Saha, B., Goebel, K., Poll, S., & Christophersen, J. (2009) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2008.2005965 · Cited by 831 · cited 1×
“In [20], the RVM and PF methods were used to predict the RUL of lithium-ion batteries, in which RVM was applied to learn the nonlinear patterns in the data, and PF was used for RUL prediction with a state-space model based on impedance spectroscopy data.”
MethodState-of-Charge Estimation for Lithium-Ion Batteries Using Neural Networks and EKF
Charkhgard, M., & Farrokhi, M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2043035 · Cited by 779 · cited 1×
“For this method, the battery model is considered a black box, and some machine learning methods are used to simulate it, including the neural network [6]–[8] and support vector machine [9], [10].”
MethodThe low temperature performance of Li-ion batteries
Zhang, S. S., Xu, K., & Jow, T. R. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00618-3 · Cited by 712
Sigma-point Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.004 · Cited by 546 · cited 1×
“The CDKF estimates more accurately in nonlinear estimation applications than the EKF [2], [3].”
MethodXiong, R., Sun, F., Chen, Z., & He, H. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.061 · Cited by 529 · cited 2×
“For this method, the extended Kalman filter (EKF) is often used to combine the ampere-hour integral method and SOC open-circuit voltage (OCV) curve to obtain a more accurate SOC estimate [4].”
MethodSelf-citationSupport Vector Machines Used to Estimate the Battery State of Charge
Álvarez Antón, J. C., García Nieto, P. J., Blanco Viejo, C., & Vilán Vilán, J. A. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2243918 · Cited by 512 · cited 1×
“For this method, the battery model is considered a black box, and some machine learning methods are used to simulate it, including the neural network [6]–[8] and support vector machine [9], [10].”
MethodChiang, Y.-H., Sean, W.-Y., & Ke, J.-C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.005 · Cited by 393 · cited 1×
“5) Model 5: First-order RC model with one-state hysteresis [24]–[26], and the state-space equation is as in (39)–(41), shown”
MethodSigma-point Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.003 · Cited by 389 · cited 5×
“[8] M. Charkhgard and M. Farrokhi, “State-of-charge estimation for lithiumion batteries using neural networks and EKF,” IEEE Trans.”
BackgroundMethodInfluentialMeng, J., Luo, G., & Gao, F. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2439578 · Cited by 349 · cited 2×
“4) Model 4: First-order RC model [23] and the state-space equation is as in (36)–(38), shown at the bottom of the page, where UD,k,l and τk = RD,k CD,k are the voltage and time constant of the RC network, and RD,k and CD,k are the polarization resistance and capacitance, respectively.”
MethodA comprehensive review on estimation strategies used in hybrid and battery electric vehicles
Cuma, M. U., & Koroglu, T. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.10.047 · Cited by 344 · cited 1×
“The authors in [11]–[13] provided more detailed SOC estimation method classifications.”
BackgroundLiu, D., Zhou, J., Liao, H., Peng, Y., & Peng, X. (2015) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2015.2389757 · Cited by 313 · cited 2×
“[19] used the maximum releasable capacity and internal resistance as the health indicators of a lithium-ion battery for degradation modeling and used the RVM technique for battery RUL prediction.”
MethodSun, F., Xiong, R., & He, H. (2016) · Applied Energy · doi:10.1016/j.apenergy.2014.12.021 · Cited by 294 · cited 1×
“5) Model 5: First-order RC model with one-state hysteresis [24]–[26], and the state-space equation is as in (39)–(41), shown”
MethodSelf-citationAdaptive state of charge algorithm for nickel metal hydride batteries including hysteresis phenomena
Verbrugge, M., & Tate, E. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.08.042 · Cited by 266
Liu, X., Chen, Z., Zhang, C., & Wu, J. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.02.072 · Cited by 235 · cited 2×
“In [22], only the SOC is estimated to indicate the battery energy state.”
BackgroundMethodZhang, Y., Xiong, R., He, H., & Shen, W. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2603229 · Cited by 235
Self-citationWang, Y., Zhang, C., & Chen, Z. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.005 · Cited by 226 · cited 2×
“subtracting the discharged energy from the maximum available energy as shown in [15]–[17].”
MethodBattery state-of-charge estimator using the SVM technique
Álvarez Antón, J. C., García Nieto, P. J., de Cos Juez, F. J., Sánchez Lasheras, F., González Vega, M., & Roqueñí Gutiérrez, M. N. (2013) · Applied Mathematical Modelling · doi:10.1016/j.apm.2013.01.024 · Cited by 211 · cited 2×
“The second category is the data-driven method [6]–[10].”
MethodChan, C. C., Lo, E. W. C., & Weixiang, S. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00502-9 · Cited by 194 · cited 2×
“The second category is the data-driven method [6]–[10].”
MethodLiu, X., Wu, J., Zhang, C., & Chen, Z. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.107 · Cited by 176 · cited 1×
“[16] used a back-propagation neural network (BPNN) technique to estimate”
MethodZhang, S., Xiong, R., & Cao, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.153 · Cited by 139 · cited 1×
“the vehicle dynamics [29].”
Self-citationLee, T., Adornato, B., & Filipi, Z. S. (2011) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2168251 · Cited by 122 · cited 1×
“The future battery current profile could be deduced from the predicted future driving condition, which is obtained through statistical techniques based on the driver’s driving mode settings and the global positioning system information [18], [28].”
MethodZhang, C., Li, K., Deng, J., & Song, S. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2610398 · Cited by 117
Liu, G., Ouyang, M., Lu, L., Li, J., & Hua, J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.110 · Cited by 109 · cited 3×
“The resistance of the equivalent model used in [18] cannot be accurately calibrated because the equivalent circuit model is only used to fit the battery input/output characteristics.”
BackgroundMethodState of charge estimation based on evolutionary neural network
Cheng, B., Zhifeng, B., & Binggang, C. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2008.03.013 · Cited by 104
Mamadou, K., Lemaire, E., Delaille, A., Riu, D., Hing, S. E., & Bultel, Y. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.075208jes · Cited by 73 · cited 17×
“Their experiment validates that the proposed method can obtain accurate SOE values even under dynamic temperatures.”
BackgroundInfluential
Cited by
Zhang, Y., Xiong, R., He, H., & Pecht, M. G. (2018) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2805189 · Cited by 1,326
“namometer driving schedule (UDDS) test [2] can be conducted to collect effective offline training data, and based on which, the developed LSTM-RNN can predict the battery RUL for EVs at”
MethodSelf-citationXiong, R., Li, L., & Tian, J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.10.019 · Cited by 1,017
Self-citationCritical Review on the Battery State of Charge Estimation Methods for Electric Vehicles
Xiong, R., Cao, J., Yu, Q., He, H., & Sun, F. (2018) · IEEE Access · doi:10.1109/access.2017.2780258 · Cited by 1,004
Self-citationHannan, M. A., Hoque, M. M., Hussain, A., Yusof, Y., & Ker, P. J. (2018) · IEEE Access · doi:10.1109/access.2018.2817655 · Cited by 988
State estimation for advanced battery management: Key challenges and future trends
Hu, X., Feng, F., Liu, K., Zhang, L., Xie, J., & Liu, B. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109334 · Cited by 857
Metadata
- Authors
- Xiong, R., Zhang, Y., He, H., Zhou, X., & Pecht, M. G.
- Affiliations
- Beijing Institute of Technology (CN)
- Kettering University (US)
- University of Maryland, College Park (US)
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2018-02
- Volume
- 65
- Issue
- 2
- Pages
- 1526-1538
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2740136822
- Cited by
- 285
- References
- 31
- Citations by year
- 2026: 12 · 2025: 15 · 2024: 27 · 2023: 40 · 2022: 35 · 2021: 30 · 2020: 28 · 2019: 36 · 2018: 46
- FWCI
- 21.88
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- Kettering University Digital Commons (Kettering University) (submittedVersion)
- Funders
- National Natural Science Foundation of China (51507012)
- Beijing Nova Program (Z171100001117063)
- Sino-polish Collaborative research in e-mobility public transportation (2015DFG81930)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Control and Systems Engineering › Control Systems and Identification
- Keywords
- lithium-ion batteries, state of charge estimation, battery management systems, electric vehicles, temperature uncertainty, battery parameter estimation, Akaike information criterion, model selection
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.