CoChat

Neutral-Point-Shift-Based Active Thermal Control for a Modular Multilevel Converter Under a Single-Phase-to-Ground Fault

Dong, Yufei, Yang, Heya, Li, Wuhua, He, Xiangning · 2019 · IEEE Transactions on Industrial Electronics

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.

Abstract

The thermal design of a highly reliable modular multilevel converter (MMC) is significant for the voltage-source-converter-based high-voltage direct current system, especially under the unbalanced ac grid fault. In this paper, the analytical thermal model of the MMC considering the fault ride-through strategy is established to explore the MMC dynamic thermal behavior under the single-phase-to-ground fault. With the established thermal model, the proportional relationship between the MMC dc current and submodule thermal imbalance factor is derived. By exploring the features of dc current, it is discovered that the asymmetrical ac voltage makes the dc current different among three phases, leading to the thermal imbalance among three phases. To solve this issue, the neutral-point-shift-based active thermal control method, which can reshape the MMC ac voltage and balance the three-phase dc current, is proposed. With the proposed control method, the thermal distribution among three phases becomes balanced and the junction temperature of the most stressed power device is significantly reduced. Furthermore, the performance analysis shows that the proposed method brings little effects on the circulating current suppression. Finally, the major theoretical conclusions are verified by a laboratory MMC test bench.

Overview

Integrity signals

Registry

Crossref · 10.1109/tie.2018.2833019

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 36 references

Cited by

See all 40

Metadata

Authors
Dong, Y., Yang, H., Li, W., & He, X.
Affiliations
Zhejiang University (CN)
Venue
IEEE Transactions on Industrial Electronics
Published
2019-03
Volume
66
Issue
3
Pages
2474-2484
ISSN
  • 0278-0046 (ISSN-L)
  • 1557-9948
OpenAlex
W2799356651
Cited by
39
References
36
Citations by year
2026: 1 · 2025: 5 · 2024: 3 · 2023: 6 · 2022: 2 · 2021: 8 · 2020: 8 · 2019: 4
FWCI
2.11
Type
journal article
Language
en
Open access
closed
Locations
IEEE Transactions on Industrial Electronics (publishedVersion)
Funders
  • National Natural Science Foundation of China (51490682, 51677166)
  • National Basic Research Program of China (973 Program 2014CB247400)
  • Natural Science Foundation of Zhejiang Province (LR16E070001)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
Keywords
modular multilevel converter, active thermal control, single-phase grounding fault, fault ride-through, thermal imbalance, voltage source converter, HVDC transmission, junction temperature, circulating current suppression, thermal modeling

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.