The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Nonlinear Dynamic Process Monitoring Using Canonical Variate Analysis and Kernel Density Estimations
Abstract
The Principal Component Analysis (PCA) and the Partial Least Squares (PLS) are two commonly used techniques for process monitoring. Both PCA and PLS assume that the data to be analysed are not self-correlated i.e. time-independent. However, most industrial processes are dynamic so that the assumption of time-independence made by the PCA and the PLS is invalid in nature. Dynamic extensions to PCA and PLS, so called DPCA and DPLS, have been developed to address this problem, however, unsatisfactorily. Nevertheless, the Canonical Variate Analysis (CVA) is a state-space-based monitoring tool, hence is more suitable for dynamic monitoring than DPCA and DPLS. The CVA is a linear tool and traditionally for simplicity, the upper control limit (UCL) of monitoring metrics associated with the CVA is derived based on a Gaussian assumption. However, most industrial processes are nonlinear and the Gaussian assumption is invalid for such processes so that CVA with a UCL based on this assumption may not be able to correctly identify underlying faults. In this work, a new monitoring technique using the CVA with UCLs derived from the estimated probability density function through kernel density estimations (KDEs) is proposed and applied to the simulated nonlinear Tennessee Eastman Process Plant. The proposed CVA with KDE approach is able to significantly improve the monitoring performance and detect faults earlier when compared to other methods also examined in this study.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A plant-wide industrial process control problem
Downs, J. J., & Vogel, E. F. (1993) · Computers & Chemical Engineering · doi:10.1016/0098-1354(93)80018-i · Cited by 3,348
Applied Smoothing Techniques for Data Analysis: The Kernel Approach with S-Plus Illustrations
Bowman, A. W., & Azzalini, A. (1997) · doi:10.1093/oso/9780198523963.001.0001 · Cited by 1,801
Disturbance detection and isolation by dynamic principal component analysis
Ku, W., Storer, R. H., & Georgakis, C. (1995) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/0169-7439(95)00076-3 · Cited by 1,483
Fault Detection and Diagnosis in Industrial Systems
Braatz, L. H. C. (2001) · Measurement Science and Technology · doi:10.1088/0957-0233/12/10/706 · Cited by 1,416
Fault Detection and Diagnosis in Industrial Systems
Chiang, L. H., Russell, E. L., & Braatz, R. D. (2001) · Advanced Textbooks in Control and Signal Processing · doi:10.1007/978-1-4471-0347-9 · Cited by 1,318
Control Procedures for Residuals Associated With Principal Component Analysis
Jackson, J. E., & Mudholkar, G. S. (1979) · Technometrics · doi:10.1080/00401706.1979.10489779 · Cited by 1,237
Applied Smoothing Techniques for Data Analysis: The Kernel Approach with S-PLUS Illustrations
Kafadar, K., Bowman, A. W., & Azzalini, A. (1999) · Journal of the American Statistical Association · doi:10.2307/2670015 · Cited by 1,193
Non-parametric confidence bounds for process performance monitoring charts
Martin, E. B., & Morris, A. J. (1996) · Journal of Process Control · doi:10.1016/0959-1524(96)00010-8 · Cited by 346
Statistical performance monitoring of dynamic multivariate processes using state space modelling
Simoglou, A., Martin, E. B., & Morris, A. J. (2002) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00012-1 · Cited by 114
Fault Detection Using Canonical Variate Analysis
Juricek, B. C., Seborg, D. E., & Larimore, W. E. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0301684 · Cited by 108
Cited by
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301773 · Cited by 1,716
Review of Recent Research on Data-Based Process Monitoring
Ge, Z., Song, Z., & Gao, F. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie302069q · Cited by 967
Improved PLS Focused on Key-Performance-Indicator-Related Fault Diagnosis
Yin, S., Zhu, X., & Kaynak, O. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345331 · Cited by 537
Automatic Defect Detection on Hot-Rolled Flat Steel Products
Ghorai, S., Mukherjee, A., Gangadaran, M., & Dutta, P. K. (2013) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2012.2218677 · Cited by 317
Wind Turbine Fault Detection Using a Denoising Autoencoder With Temporal Information
Jiang, G., Xie, P., He, H., & Yan, J. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2759301 · Cited by 288
Metadata
- Authors
- Odiowei, P.-E. P., & Cao, Y.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2010-02
- Volume
- 6
- Issue
- 1
- Pages
- 36-45
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2098815387
- Cited by
- 361
- References
- 15
- FWCI
- 8.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Nonlinear Dynamic Process Monitoring Using Canonical Variate Analysis and Kernel Density Estimations. https://app.cochat.ai/papers/10.1109/tii.2009.2032654
- The paper
- Odiowei, P.-E. P., & Cao, Y. (2010). Nonlinear Dynamic Process Monitoring Using Canonical Variate Analysis and Kernel Density Estimations. IEEE Transactions on Industrial Informatics. https://doi.org/10.1109/tii.2009.2032654
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.