The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Fault Diagnosis for a Wind Turbine Generator Bearing via Sparse Representation and Shift-Invariant K-SVD
Abstract
It is always a primary challenge in fault diagnosis of a wind turbine generator to extract fault character information under strong noise and nonstationary condition. As a novel signal processing method, sparse representation shows excellent performance in time-frequency analysis and feature extraction. However, its result is directly influenced by dictionary, whose atoms should be as similar with signal's inner structure as possible. Due to the variability of operation environment and physical structure in industrial systems, the patterns of impulse signals are changing over time, which makes creating a proper dictionary even harder. To solve the problem, a novel data-driven fault diagnosis method based on sparse representation and shift-invariant dictionary learning is proposed. The impulse signals at different locations with the same characteristic can be represented by only one atom through shift operation. Then, the shift-invariant dictionary is generated by taking all the possible shifts of a few short atoms and, consequently, is more applicable to represent long signals that in the same pattern appear periodically. Based on the learnt shift-invariant dictionary, the coefficients obtained can be sparser, with the extracted impulse signal being closer to the real signal. Finally, the time-frequency representation of the impulse component is obtained with consideration of both the Wigner-Ville distribution of every atom and the corresponding sparse coefficient. The excellent performance of different fault diagnoses in a fault simulator and a wind turbine proves the effectiveness and robustness of the proposed method. Meanwhile, the comparison with the state-of-the-art method is illustrated, which highlights the superiority of the proposed method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
Review of condition monitoring of rotating electrical machines
Tavner, P. J. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070280 · Cited by 531
Leite, V. C. M. N., Borges da Silva, J. G., Veloso, G. F. C., Borges da Silva, L. E., Lambert-Torres, G., Bonaldi, E. L., & de Lacerda de Oliveira, L. E. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345330 · Cited by 274 · cited 1×
“Harmonic components spread all over the vibration signal and can cause modulation effect on the impact component and, consequently, influence the result of impulsive feature extraction, which is a fundamental transient phenomenon that always modeled as dynamic response of abnormal operations when the generator develop…”
Background
Cited by
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
“Time–frequency analysis such as short time Fourier transform (STFT), Hilbert-Huang transform (HHT) [24], wavelet transform [25], wavelet packet transform (WPT) and sparse decomposition [26] are often used for feature extraction.”
MethodSelf-citationLiu, Z., & Zhang, L. (2020) · Measurement · doi:10.1016/j.measurement.2019.107002 · Cited by 535
Liu, R., Wang, F., Yang, B., & Qin, S. J. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2941868 · Cited by 454
Self-citationRemaining Useful Life Prediction Based on a Double-Convolutional Neural Network Architecture
Yang, B., Liu, R., & Zio, E. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2924605 · Cited by 429
Self-citationRai, R., & Sahu, C. K. (2020) · IEEE Access · doi:10.1109/access.2020.2987324 · Cited by 315
Metadata
- Authors
- Yang, B., Liu, R., & Chen, X.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2017-06
- Volume
- 13
- Issue
- 3
- Pages
- 1321-1331
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2583356199
- Cited by
- 218
- References
- 3
- FWCI
- 17.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.