The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Utilizing Industry 4.0 on the Construction Site: Challenges and Opportunities
Open accessAbstract
In recent years, a step change has been seen in the rate of adoption of Industry 4.0 technologies by manufacturers and industrial organizations alike. This article discusses the current state of the art in the adoption of Industry 4.0 technologies within the construction industry. Increasing complexity in onsite construction projects coupled with the need for higher productivity is leading to increased interest in the potential use of Industry 4.0 technologies. This article discusses the relevance of the following key Industry 4.0 technologies to construction: data analytics and artificial intelligence, robotics and automation, building information management, sensors and wearables, digital twin, and industrial connectivity. Industrial connectivity is a key aspect as it ensures that all Industry 4.0 technologies are interconnected allowing the full benefits to be realized. This article also presents a research agenda for the adoption of Industry 4.0 technologies within the construction sector, a three-phase use of intelligent assets from the point of manufacture up to after build, and a four-staged R&D process for the implementation of smart wearables in a digital enhanced construction site.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Digital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
Oesterreich, T. D., & Teuteberg, F. (2016) · Computers in Industry · doi:10.1016/j.compind.2016.09.006 · Cited by 1,526
A critical review of virtual and augmented reality (VR/AR) applications in construction safety
Li, X., Yi, W., Chi, H.-L., Wang, X., & Chan, A. P. C. (2018) · Automation in Construction · doi:10.1016/j.autcon.2017.11.003 · Cited by 1,055
3D Printing of Buildings and Building Components as the Future of Sustainable Construction?
Hager, I., Golonka, A., & Putanowicz, R. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.07.357 · Cited by 593
Alaloul, W. S., Liew, M. S., Zawawi, N. A. W. A., & Kennedy, I. B. (2020) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2019.08.010 · Cited by 472
Zhang, H., Liu, Q., Chen, X., Zhang, D., & Leng, J. (2017) · IEEE Access · doi:10.1109/access.2017.2766453 · Cited by 471
Dallasega, P., Rauch, E., & Linder, C. (2018) · Computers in Industry · doi:10.1016/j.compind.2018.03.039 · Cited by 468
BIM-based fall hazard identification and prevention in construction safety planning
Zhang, S., Sulankivi, K., Kiviniemi, M., Romo, I., Eastman, C. M., & Teizer, J. (2015) · Safety Science · doi:10.1016/j.ssci.2014.08.001 · Cited by 447
A framework for construction safety management and visualization system
Park, C.-S., & Kim, H.-J. (2013) · Automation in Construction · doi:10.1016/j.autcon.2012.09.012 · Cited by 348
A framework for integrating BIM and IoT through open standards
Dave, B., Buda, A., Nurminen, A., & Främling, K. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.07.022 · Cited by 284
Cited by
Opportunities and Adoption Challenges of AI in the Construction Industry: A PRISMA Review
Regona, M., Yigitcanlar, T., Xia, B., & Li, R. Y. M. (2022) · Journal of Open Innovation: Technology, Market, and Complexity · doi:10.3390/joitmc8010045 · Cited by 543
Khalil, R. A., Saeed, N., Masood, M., Fard, Y. M., Alouini, M.-S., & Al-Naffouri, T. Y. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3051414 · Cited by 318
Regona, M., Yigitcanlar, T., Hon, C., & Teo, M. (2024) · Sustainable Cities and Society · doi:10.1016/j.scs.2024.105499 · Cited by 254
A review of drivers and barriers of Digital Twin adoption in building project development processes
Jahangir, M. F., Schultz, C. P. L., & Kamari, A. (2024) · Journal of Information Technology in Construction · doi:10.36680/j.itcon.2024.008 · Cited by 34
DIGITAL TWIN APPLICATION IN CONSTRUCTION COST MANAGEMENT
Che Haron, R., & Muhd Zafir, N. B. (2025) · PLANNING MALAYSIA · doi:10.21837/pm.v23i35.1665 · Cited by 6
Metadata
- Authors
- Turner, C. J., Oyekan, J., Stergioulas, L., & Griffin, D.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2021-02
- Volume
- 17
- Issue
- 2
- Pages
- 746-756
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W3035300366
- Cited by
- 290
- References
- 34
- FWCI
- 16.53
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Utilizing Industry 4.0 on the Construction Site: Challenges and Opportunities. https://app.cochat.ai/papers/10.1109/tii.2020.3002197
- The paper
- Turner, C. J., Oyekan, J., Stergioulas, L., & Griffin, D. (2021). Utilizing Industry 4.0 on the Construction Site: Challenges and Opportunities. IEEE Transactions on Industrial Informatics. https://doi.org/10.1109/tii.2020.3002197
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.