Intelligent Fault Diagnosis of Rotor-Bearing System Under Varying Working Conditions With Modified Transfer Convolutional Neural Network and Thermal Images
Open accessThe DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Abstract
The existing intelligent fault diagnosis methods of rotor-bearing system mainly focus on vibration analysis under steady operation, which has low adaptability to new scenes. In this article, a new framework for rotor-bearing system fault diagnosis under varying working conditions is proposed by using modified convolutional neural network (CNN) with transfer learning. First, infrared thermal images are collected and used to characterize the health condition of rotor-bearing system. Second, modified CNN is developed by introducing stochastic pooling and Leaky rectified linear unit to overcome the training problems in classical CNN. Finally, parameter transfer is used to enable the source modified CNN to adapt to the target domain, which solves the problem of limited available training data in the target domain. The proposed method is applied to analyze thermal images of rotor-bearing system collected under different working conditions. The results show that the proposed method outperforms other cutting edge methods in fault diagnosis of rotor-bearing system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Highly Accurate Machine Fault Diagnosis Using Deep Transfer Learning
Shao, S., McAleer, S., Yan, R., & Baldi, P. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2864759 · Cited by 1,635
Deep Residual Shrinkage Networks for Fault Diagnosis
Zhao, M., Zhong, S., Fu, X., Tang, B., & Pecht, M. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2943898 · Cited by 1,447 · cited 1×
“A large number of studies have claimed that the diagnosis results of different shallow learning models are largely affected by the effectiveness of extracted features [7]–[9].”
BackgroundYang, B., Lei, Y., Jia, F., & Xing, S. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.12.051 · Cited by 879 · cited 1×
“In engineering practice, the operating conditions of equipment frequently change, which will result in different distributions of the collected samples [23].”
BackgroundStochastic Pooling for Regularization of Deep Convolutional Neural Networks
Zeiler, M. D., & Fergus, R. (2013) · arXiv (Cornell University) · doi:10.48550/arxiv.1301.3557 · Cited by 755
Sun, C., Ma, M., Zhao, Z., Tian, S., Yan, R., & Chen, X. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2881543 · Cited by 519
Electric Locomotive Bearing Fault Diagnosis Using a Novel Convolutional Deep Belief Network
Shao, H., Jiang, H., Zhang, H., & Liang, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2745473 · Cited by 488
Self-citationIntelligent Fault Diagnosis for Rotary Machinery Using Transferable Convolutional Neural Network
Chen, Z., Gryllias, K., & Li, W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2917233 · Cited by 342
Deep Coupling Autoencoder for Fault Diagnosis With Multimodal Sensory Data
Ma, M., Sun, C., & Chen, X. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2793246 · Cited by 304
Pan, J., Zi, Y., Chen, J., Zhou, Z., & Wang, B. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2767540 · Cited by 294
A Two-Stage Approach for the Remaining Useful Life Prediction of Bearings Using Deep Neural Networks
Xia, M., Li, T., Shu, T., Wan, J., de Silva, C. W., & Wang, Z. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2868687 · Cited by 291
Self-citationGearbox Fault Diagnosis Using a Deep Learning Model With Limited Data Sample
Saufi, S. R., Ahmad, Z. A. B., Leong, M. S., & Lim, M. H. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2967822 · Cited by 273
Fault detection in rotor bearing systems using time frequency techniques
Chandra, N. H., & Sekhar, A. S. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.11.013 · Cited by 212
Deep learning for infrared thermal image based machine health monitoring
Janssens, O., Van de Walle, R., Loccufier, M., & Van Hoecke, S. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2722479 · Cited by 207 · cited 1×
“In 2018 and 2019, Janssens et al. [20], [21] utilized deep CNNs to analyze the thermal images for machine fault classification and oil-level prediction.”
BackgroundDeep Coupled Dense Convolutional Network With Complementary Data for Intelligent Fault Diagnosis
Jiao, J., Zhao, M., Lin, J., & Ding, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2902817 · Cited by 169
Oh, H., Jung, J. H., Jeon, B., & Youn, B. D. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2752151 · Cited by 153
Tran, V. T., Yang, B., Gu, F., & Ball, A. D. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.02.001 · Cited by 127
A Rotating Machinery Fault Diagnosis Method Based on Feature Learning of Thermal Images
Jia, Z. Y., Liu, Z., Vong, C., & PECHT, M. G. (2019) · IEEE Access · doi:10.1109/access.2019.2893331 · Cited by 125
Thermal Imaging and Vibration-Based Multisensor Fault Detection for Rotating Machinery
Janssens, O., Loccufier, M., & Hoecke, S. V. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2873175 · Cited by 111
Taeyoung, K., & Kim, H. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2941486 · Cited by 83
Wan, L., Han, G., Shu, L., Chan, S., & Feng, N. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2520905 · Cited by 81
Self-citationNasiri, A., Taheri‐Garavand, A., Omid, M., & Carlomagno, G. M. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114410 · Cited by 79
Li, X., Jiang, H., Zhao, K., & Wang, R. (2019) · IEEE Access · doi:10.1109/access.2019.2926234 · Cited by 65
A Data-Driven Monitoring Scheme for Rotating Machinery Via Self-Comparison Approach
Zhao, M. J., Jiao, J., & Lin, J. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2875956 · Cited by 44
A novel identification method of Volterra series in rotor-bearing system for fault diagnosis
Xia, X. T., Zhou, J., Xiao, J., & Han, X. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.05.006 · Cited by 42
Self-adaptive fault diagnosis of roller bearings using infrared thermal images
Huo, Z., Zhang, Y., Sath, R., & Shu, L. (2017) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2017.8217062 · Cited by 32
Self-citationThermography-Based Methodology for Multifault Diagnosis on Kinematic Chain
Delgado-Prieto, M., Carino, J. A., Saucedo-Dorantes, J. J., Romero-Troncoso, R. D. J., & Osornio-Rios, R. A. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2816925 · Cited by 24
Cited by
Li, W., Huang, R., Li, J., Liao, Y., Chen, Z., He, G., Yan, R., & Gryllias, K. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108487 · Cited by 816
A review of the application of deep learning in intelligent fault diagnosis of rotating machinery
Zhu, Z., Lei, Y., Qi, G., Chai, Y., Mazur, N., An, Y., & Huang, X. (2023) · Measurement · doi:10.1016/j.measurement.2022.112346 · Cited by 731
Zhao, Z., Zhang, Q., Yu, X., Sun, C., Wang, S., Yan, R., & Chen, X. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3116309 · Cited by 526
Intelligent fault diagnosis of machinery using digital twin-assisted deep transfer learning
Xia, M., Shao, H., Williams, D., Lu, S., Shu, L., & de Silva, C. W. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.107938 · Cited by 378
Self-citationLi, W., Zhong, X., Shao, H., Cai, B., & Yang, X. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101552 · Cited by 340
Self-citation
Metadata
- Authors
- Shao, H., Xia, M., Han, G., Zhang, Y., & Wan, J.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2021-05
- Volume
- 17
- Issue
- 5
- Pages
- 3488-3496
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W3039216919
- Cited by
- 452
- References
- 26
- FWCI
- 32.91
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.