The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Bearing Health Monitoring Based on Hilbert–Huang Transform, Support Vector Machine, and Regression
Abstract
The detection, diagnostic, and prognostic of bearing degradation play a key role in increasing the reliability and safety of electrical machines, especially in key industrial sectors. This paper presents a new approach that combines the Hilbert-Huang transform (HHT), the support vector machine (SVM), and the support vector regression (SVR) for the monitoring of ball bearings. The proposed approach uses the HHT to extract new heath indicators from stationary/nonstationary vibration signals able to tack the degradation of the critical components of bearings. The degradation states are detected by a supervised classification technique called SVM, and the fault diagnostic is given by analyzing the extracted health indicators. The estimation of the remaining useful life is obtained by a one-step time-series prediction based on SVR. A set of experimental data collected from degraded bearings is used to validate the proposed approach. The experimental results show that the use of the HHT, the SVM, and the SVR is a suitable strategy to improve the detection, diagnostic, and prognostic of bearing degradation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Nature of Statistical Learning Theory
Vapnik, V. N. (1995) · doi:10.1007/978-1-4757-2440-0 · Cited by 39,138
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564
Support Vector Method for Function Approximation, Regression Estimation, and Signal Processing
Vapnik, V. N., Golowich, S. E., & Smola, A. J. (1997) · Cited by 2,757
A NEW VIEW OF NONLINEAR WATER WAVES: The Hilbert Spectrum
Huang, N. E., Shen, Z., & Long, S. R. (1999) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.31.1.417 · Cited by 2,098
PRONOSTIA : An experimental platform for bearings accelerated degradation tests.
Nectoux, P., Gouriveau, R., Medjaher, K., Ramasso, E., Chebel‐Morello, B., Noureddine Zerhouni, A., & Varnier, C. (2012) · HAL · Cited by 928
Self-citationSupervised neural networks for the classification of structures
Sperduti, A., & Starita, A. (1997) · IEEE Transactions on Neural Networks · doi:10.1109/72.572108 · Cited by 666
Boudraa, A., & Cexus, J.-C. (2007) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2007.907967 · Cited by 657
Models for Bearing Damage Detection in Induction Motors Using Stator Current Monitoring
Blodt, M., Granjon, P., Raison, B., & Rostaing, G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.917108 · Cited by 568
Hilbert–Huang Transform-Based Vibration Signal Analysis for Machine Health Monitoring
Yan, R., & Gao, R. X. (2006) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2006.887042 · Cited by 357
Remaining useful life estimation based on nonlinear feature reduction and support vector regression
Benkedjouh, T., Medjaher, K., Zerhouni, N., & Rechak, S. (2013) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2013.02.006 · Cited by 353
Self-citationAssessment of the Reliability of Motors in Utility Applications - Updated
Albrecht, P. F., Appiarius, J. C., McCoy, R. M., Owen, E. L., & Sharma, D. K. (1986) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.1986.4765668 · Cited by 334
Tandon, N., & Choudhury, A. (1997) · Journal of Sound and Vibration · doi:10.1006/jsvi.1997.1031 · Cited by 304
Wavelet Analysis of Vibration: Part 1—Theory
Newland, D. E. (1994) · Journal of Vibration and Acoustics · doi:10.1115/1.2930443 · Cited by 300
Remaining Useful Life Estimation of Critical Components With Application to Bearings
Medjaher, K., Tobon-Mejia, D. A., & Zerhouni, N. (2012) · IEEE Transactions on Reliability · doi:10.1109/tr.2012.2194175 · Cited by 292
Self-citationA Probabilistic Fault Detection Approach: Application to Bearing Fault Detection
Zhang, B., Sconyers, C., Byington, C., Patrick, R., Orchard, M. E., & Vachtsevanos, G. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2058072 · Cited by 269
Soualhi, A., Clerc, G., & Razik, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2230598 · Cited by 264
Self-citationModel-Based Prognostic Techniques Applied to a Suspension System
Luo, J., Pattipati, K. R., Qiao, L., & Chigusa, S. (2008) · IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans · doi:10.1109/tsmca.2008.2001055 · Cited by 234
Soualhi, A., Razik, H., Clerc, G., & Doan, D. D. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2274415 · Cited by 213
Self-citationImmovilli, F., Cocconcelli, M., Bellini, A., & Rubini, R. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025288 · Cited by 201
Lau, E. C. C., & Ngan, H. W. (2010) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2010.2045927 · Cited by 178
The effects of PWM voltage source inverters on the mechanical performance of rolling bearings
Busse, D. F., Erdman, J. M., Kerkman, R. J., Schlegel, D. W., & Skibinski, G. L. (1997) · IEEE Transactions on Industry Applications · doi:10.1109/28.568024 · Cited by 162
Prediction of Machine Health Condition Using Neuro-Fuzzy and Bayesian Algorithms
Chen, C., Zhang, B., & Vachtsevanos, G. (2011) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2011.2169182 · Cited by 136
Time-Frequency Manifold as a Signature for Machine Health Diagnosis
He, Q., Liu, Y., Qian, L., et al. (2012) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2012.2183402 · Cited by 95
An Enhanced Diagnostic Scheme for Bearing Condition Monitoring
Liu, J., Wang, W., & Golnaraghi, F. (2009) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2009.2023814 · Cited by 87
Cited by
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
A Hybrid Prognostics Approach for Estimating Remaining Useful Life of Rolling Element Bearings
Wang, B., Lei, Y., Li, N., & Li, N. (2020) · IEEE Transactions on Reliability · doi:10.1109/tr.2018.2882682 · Cited by 1,917
Big IoT data analytics: Architecture, opportunities, and open research challenges
(2017) · IEEE Access · doi:10.1109/access.2017.2689040 · Cited by 980
Chen, Z., & Li, W. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2669947 · Cited by 883
Metadata
- Authors
- Soualhi, A., Medjaher, K., & Zerhouni, N.
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2015-01
- Volume
- 64
- Issue
- 1
- Pages
- 52-62
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W2053443947
- Cited by
- 665
- References
- 24
- FWCI
- 29.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.