The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
A Motor Current Signal-Based Bearing Fault Diagnosis Using Deep Learning and Information Fusion
Abstract
Bearing fault diagnosis has extensively exploited vibration signals (VSs) because of their rich information about bearing health conditions. However, this approach is expensive because the measurement of VSs requires external accelerometers. Moreover, in machine systems that are inaccessible or unable to be installed in external sensors, the VS-based approach is impracticable. Otherwise, motor current signals (CSs) are easily measured by the inverters that are the available components of those systems. Therefore, the motor CS-based bearing fault diagnosis approach has attracted considerable attention from researchers. However, the performance of this approach is still not good as the VS-based approach, especially in the case of fault diagnosis for external bearings (the bearings that are installed outside of the electric motors). Accordingly, this article proposes a motor CS-based fault diagnosis method utilizing deep learning and information fusion (IF), which can be applied to external bearings in rotary machine systems. The proposed method uses raw signals from multiple phases of the motor current as direct input, and the features are extracted from the CSs of each phase. Then, each feature set is classified separately by a convolutional neural network (CNN). To enhance the classification accuracy, a novel decision-level IF technique is introduced to fuse information from all of the utilized CNNs. The problem of decision-level IF is transformed into a simple pattern classification task, which can be solved effectively by familiar supervised learning algorithms. The effectiveness of the proposed fault diagnosis method is verified through experiments carried out with actual bearing fault signals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2008) · Journal of Machine Learning Research · Cited by 33,051
Rolling element bearing diagnostics—A tutorial
Randall, R. B., & Antoni, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.07.017 · Cited by 2,744
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
Lessmeier, C., Kimotho, J. K., Zimmer, D., & Sextro, W. (2016) · PHM Society European Conference · doi:10.36001/phme.2016.v3i1.1577 · Cited by 1,268
Exploring Strategies for Training Deep Neural Networks
Larochelle, H., Bengio, Y., Louradour, J., & Lamblin, P. (2009) · doi:10.1145/1577069.1577070 · Cited by 1,095
Chen, Z., & Li, W. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2669947 · Cited by 883
A tutorial survey of architectures, algorithms, and applications for deep learning
Deng, L. (2014) · APSIPA Transactions on Signal and Information Processing · doi:10.1017/atsip.2013.9 · Cited by 725
Jing, L., Zhao, M., Li, P., & Xu, X. (2017) · Measurement · doi:10.1016/j.measurement.2017.07.017 · Cited by 698
Ding, X., & He, Q. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2674738 · Cited by 489
Tian, J., Morillo, C., Azarian, M. H., & Pecht, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2509913 · Cited by 488
Electric Locomotive Bearing Fault Diagnosis Using a Novel Convolutional Deep Belief Network
Shao, H., Jiang, H., Zhang, H., & Liang, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2745473 · Cited by 488
Intelligent Bearing Fault Diagnosis Method Combining Compressed Data Acquisition and Deep Learning
Sun, J., Yan, C., & Wen, J. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2759418 · Cited by 422
Mbo'o, C. P., & Hameyer, K. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2581139 · Cited by 135
Motor Current Signature Analysis for Bearing Fault Detection in Mechanical Systems
Singh, S., Kumar, A., & Kumar, N. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.021 · Cited by 120
High-level Information Fusion: An Overview.
Foo, P. H., & Ng, G. W. (2013) · Journal of advances in information fusion · Cited by 100
Maruthi, G. S., & Hegde, V. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2015.2476561 · Cited by 99
Current Noise Cancellation for Bearing Fault Diagnosis Using Time Shifting
Dalvand, F., Dalvand, S., Sharafi, F., & PECHT, M. G. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2694397 · Cited by 83
Motor Current Signal Analysis Based on a Matched Subspace Detector
Elbouchikhi, E., Choqueuse, V., Auger, F. A., & Benbouzid, M. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2749858 · Cited by 74
Shahriar, M. R., Borghesani, P., & Tan, A. C. C. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2782240 · Cited by 59
Motor Fault Detection and Diagnosis Using Fuzzy Cognitive Networks with Functional Weights
Karatzinis, G. D., Boutalis, Y. S., & Karnavas, Y. L. (2018) · Mediterranean Conference on Control and Automation (MED) · doi:10.1109/med.2018.8443043 · Cited by 23
Bearing Fault Detection in Induction Machine Using Squared Envelope Analysis of Stator Current
Leite, V. C. M. N., da Silva, J. G. B., Lambert‐Torres, G., Veloso, G. F. C., da Silva, L. E. B., Bonaldi, E. L., & de Oliveira, L. E. D. L. (2017) · InTech eBooks · doi:10.5772/67145 · Cited by 14
Cited by
A comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
CNN parameter design based on fault signal analysis and its application in bearing fault diagnosis
Ruan, D., Wang, J., Yan, J., & Gühmann, C. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.101877 · Cited by 435
Intelligent Mechanical Fault Diagnosis Using Multisensor Fusion and Convolution Neural Network
Xie, T., Huang, X., & Choi, S.-K. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3102017 · Cited by 306
Multi-Sensor data fusion in intelligent fault diagnosis of rotating machines: A comprehensive review
Kibrete, F., Engida Woldemichael, D., & Shimels Gebremedhen, H. (2024) · Measurement · doi:10.1016/j.measurement.2024.114658 · Cited by 270
Motor Fault Diagnostics Based on Current Signatures: A Review
Niu, G., Dong, X., & Chen, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3285999 · Cited by 269
Metadata
- Authors
- Hoang, D. T., & Kang, H. J.
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2020-06
- Volume
- 69
- Issue
- 6
- Pages
- 3325-3333
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W2965625921
- Cited by
- 378
- References
- 21
- FWCI
- 14.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.