The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Small-Signal Impedance Measurement of Power-Electronics-Based AC Power Systems Using Line-to-Line Current Injection
Abstract
Naval ships as well as aerospace power systems are incorporating a greater degree of power electronic switching sources and loads. Although these components provide exceptional performance, they are prone to instability due to their high efficiency and constant power characteristics that can exhibit negative impedance nature at certain frequencies. When designing these systems, integrators must consider the impedance versus frequency at an interface (which designates source and load). Stability criteria have been developed in terms of source and load impedances for both dc and ac systems, and it is often helpful to have techniques for impedance measurement. For dc systems, the measurement techniques have been well established. This paper introduces a new method of impedance measurement for three-phase ac systems. By injecting an unbalanced line-to-line current between two lines of the ac system, all impedance information in the traditional synchronous reference framed-qmodel can be determined. For medium-voltage systems, the proposed technique is simpler and less costly than having an injection circuit for each phase. Since the current injection is between only two phase lines, the proposed measurement device can be used for both ac and dc interfaces. Simulation and laboratory measurements demonstrate the effectiveness of this new technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Analysis of Electric Machinery and Drive Systems
(2013) · Wiley eBooks · doi:10.1002/9781118524336 · Cited by 2,678
Analysis of Electric Machinery and Drive Systems
Krause, P. C., Wasynczuk, O., & Sudhoff, S. D. (2002) · Institute of Electrical and Electronics Engineers eBooks · doi:10.1109/9780470544167 · Cited by 2,314
Input filter considerations in design and application of switching regulators.
Middlebrook, R. D. (1976) · Medical Entomology and Zoology · Cited by 1,180
Emadi, A., Khaligh, A., Rivetta, C. H., & Williamson, G. A. (2006) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2006.877483 · Cited by 934
Impedance specifications for stable DC distributed power systems
Feng, X., Liu, J., & Lee, F. C. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/63.988825 · Cited by 582
A method of defining the load impedance specification for a stable distributed power system
Wildrick, C. M., Lee, F. C., Cho, B. H., & Choi, B. (1995) · IEEE Transactions on Power Electronics · doi:10.1109/63.387992 · Cited by 520
A method of defining the load impedance specification for a stable distributed power system
Wildrick, C. M., Lee, F. C., Cho, B. H., & Choi, B. (2002) · Proceedings of IEEE Power Electronics Specialist Conference - PESC '93 · doi:10.1109/pesc.1993.472017 · Cited by 401
DC link stabilized field oriented control of electric propulsion systems
Sudhoff, S. D., Corzine, K. A., Glover, S. F., Hegner, H. J., & Robey, H. N. (1998) · IEEE Transactions on Energy Conversion · doi:10.1109/60.658200 · Cited by 211
Self-citation
Cited by
Analysis of D-Q Small-Signal Impedance of Grid-Tied Inverters
Wen, B., Boroyevich, D., Burgos, R., Mattavelli, P., & Shen, Z. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2398192 · Cited by 1,334
Vasquez, J. C., Guerrero, J. M., Luna, A., Rodriguez, P., & Teodorescu, R. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027921 · Cited by 629
Wen, B., Boroyevich, D., Burgos, R., Mattavelli, P., & Shen, Z. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2378731 · Cited by 453
Definitions and Applications of Dynamic Average Models for Analysis of Power Systems
Chiniforoosh, S., Jatskevich, J., Yazdani, A., Sood, V., Dinavahi, V., Martinez, J. A., & Ramirez, A. (2010) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2043859 · Cited by 306
Frequency Domain Stability Analysis of MMC-Based HVdc for Wind Farm Integration
Lyu, J., Cai, X., & Molinas, M. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2015.2498182 · Cited by 267
Metadata
- Authors
- Huang, J., Corzine, K. A., & Belkhayat, M.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2009-02
- Volume
- 24
- Issue
- 2
- Pages
- 445-455
- ISSN
- 0885-8993 (ISSN-L)
- OpenAlex
- W2107613737
- Cited by
- 253
- References
- 8
- FWCI
- 6.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Small-Signal Impedance Measurement of Power-Electronics-Based AC Power Systems Using Line-to-Line Current Injection. https://app.cochat.ai/papers/10.1109/tpel.2008.2007212
- The paper
- Huang, J., Corzine, K. A., & Belkhayat, M. (2009). Small-Signal Impedance Measurement of Power-Electronics-Based AC Power Systems Using Line-to-Line Current Injection. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2008.2007212
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.