The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Pwm control of dual active bridge: Comprehensive analysis and experimental verification
Abstract
The dual-active-bridge (DAB) topology is ideally suited for high-power dc–dc conversion, especially when bidirectional power transfer is required. However, it has the drawback of high circulating currents and hard switching at light loads, if wide variation in input and output is expected. To address these issues, this paper presents a comprehensive analysis and experimental results with pulsewidth-modulation (PWM) control of the DAB. The PWM control is in addition to phase-shift modulation between the two H-bridges. The analysis addresses PWM of one bridge at a time and of both bridges simultaneously. In the latter, five distinct modes arise based on the choice of PWM and load condition. The possibilities are analyzed for optimizing power density and efficiency for low-load operation. Finally, a composite scheme combining single and dual PWM is proposed that extends the soft-switching range down to zero-load condition, reduces rms and peak currents, and results in significant size reduction of the transformer. Experimental results are presented with a 10-kW prototype.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A three-phase soft-switched high-power-density DC/DC converter for high-power applications
De Doncker, R. W. A. A., Divan, D. M., & Kheraluwala, M. H. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.67533 · Cited by 2,535
Performance characterization of a high-power dual active bridge DC-to-DC converter
Kheraluwala, M. N., Gascoigne, R. W., Divan, D. M., & Baumann, E. D. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.175280 · Cited by 1,496
Transformer and Inductor Design Handbook
McLyman, C. W. T. (2004) · CRC Press eBooks · doi:10.1201/9780203913598 · Cited by 1,369
Bai, H., & Mi, C. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2005103 · Cited by 1,121
Real‐Time Optimization by Extremum‐Seeking Control
Ariyur, K. B., & Krstić, M. (2003) · Wiley eBooks · doi:10.1002/0471669784 · Cited by 986
Real-time optimization by extremum-seeking control
(2004) · Choice Reviews Online · doi:10.5860/choice.41-4064 · Cited by 822
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
A Bidirectional DC–DC Converter for an Energy Storage System With Galvanic Isolation
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.909248 · Cited by 780
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889939 · Cited by 669
Switching Control Strategy to Minimize Dual Active Bridge Converter Losses
Oggier, G. G., GarcÍa, G. O., & Oliva, A. R. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2020902 · Cited by 514
Transformer-Coupled Multiport ZVS Bidirectional DC–DC Converter With Wide Input Range
Tao, H., Kotsopoulos, A., Duarte, J. L., & Hendrix, M. A. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915129 · Cited by 478
Three-Port Bidirectional Converter for Hybrid Fuel Cell Systems
Duarte, J. L., Hendrix, M., & Simoes, M. G. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889928 · Cited by 441
Krismer, F., & Kolar, J. W. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2027904 · Cited by 421
Three-Port Triple-Half-Bridge Bidirectional Converter With Zero-Voltage Switching
Tao, H., Duarte, J. L., & Hendrix, M. A. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915023 · Cited by 404
A ZVS Bidirectional DC–DC Converter With Phase-Shift Plus PWM Control Scheme
Xiao, H., & Xie, S. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915188 · Cited by 299
A PWM Plus Phase-Shift Control Bidirectional DC–DC Converter
Xu, D., Zhao, C., & Fan, H. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.826485 · Cited by 284
A ZVS Bi-Directional DC–DC Converter for Multiple Energy Storage Elements
Liu, D., & Li, H. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.882450 · Cited by 283
Zhou, H., & Khambadkone, A. M. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2023493 · Cited by 283
Performance optimization of a high current dual active bridge with a wide operating voltage range
Krismer, F., Round, S., & Kolar, J. W. (2006) · 2006 37th IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.2006.1712096 · Cited by 276
A comparison of high-power DC-DC soft-switched converter topologies
Steigerwald, R. L., De Doncker, R. W., & Kheraluwala, H. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.536876 · Cited by 231
A compact, high voltage 25 kW, 50 kHz DC-DC converter based on SiC JFETs
Aggeler, D., Biela, J., & Kolar, J. W. (2008) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2008.4522813 · Cited by 112
High-power galvanically isolated DC/DC converter topology for future automobiles
Walter, J., & Doncker, R. W. D. (2004) · IEEE Annual Conference on Power Electronics Specialist · doi:10.1109/pesc.2003.1218269 · Cited by 93
Krishnamurthy, H. K., & Ayyanar, R. (2007) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2007.4342035 · Cited by 91
Self-citationEfficient high-frequency soft-switched power converter with signal processor control
Vangen, K., Melaa, T., Bergsmark, S., & Nilsen, R. (2002) · International Telecommunications Energy Conference (INTELEC) · doi:10.1109/intlec.1991.172460 · Cited by 77
Soft-switched high-frequency, high power DC/AC converter with IGBT
Vangen, K., Melaa, T., & Ådnanes, A. K. (2003) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1992.254687 · Cited by 73
An improved dual active bridge DC/DC converter
Zhang, J. M., Xu, D., & Qian, Z. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2001.954025 · Cited by 61
Cited by
Zhao, B., Song, Q., Liu, W., & Sun, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2289913 · Cited by 1,886
Efficiency-Optimized High-Current Dual Active Bridge Converter for Automotive Applications
Krismer, F., & Kolar, J. W. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2112312 · Cited by 747
Closed Form Solution for Minimum Conduction Loss Modulation of DAB Converters
Krismer, F., & Kolar, J. W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2157976 · Cited by 635
Generalized Average Modeling of Dual Active Bridge DC–DC Converter
Qin, H., & Kimball, J. W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2165734 · Cited by 557
Hou, N., & Li, Y. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2927930 · Cited by 553
Metadata
- Authors
- Jain, A. K., & Ayyanar, R.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2011-04
- Volume
- 26
- Issue
- 4
- Pages
- 1215-1227
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2145047138
- Cited by
- 567
- References
- 26
- FWCI
- 13.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.