The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
A Cascaded High Step-Up DC–DC Converter With Single Switch for Microsource Applications
Abstract
This paper proposes a new high step-up dc-dc converter designed especially for regulating the dc interface between various microsources and a dc-ac inverter to electricity grid. The figuration of the proposed converter is a quadratic boost converter with the coupled inductor in the second boost converter. The converter achieves high step-up voltage gain with appropriate duty ratio and low voltage stress on the power switch. Additionally, the energy stored in the leakage inductor of the coupled inductor can be recycled to the output capacitor. The operating principles and steady-state analyses of continuous-conduction mode and boundary-conduction mode are discussed in detail. To verify the performance of the proposed converter, a 280-W prototype sample is implemented with an input voltage range of 20-40 V and an output voltage of up to 400 V. The upmost efficiency of 93.3% is reached with high-line input; on the other hand, the full-load efficiency remains at 89.3% during low-line input.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A Survey
Carrasco, J. M., Franquelo, L. G., Bialasiewicz, J. T., Galvan, E., PortilloGuisado, R. C., Prats, M. A. M., Leon, J. I., & Moreno-Alfonso, N. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.878356 · Cited by 4,018
Modeling, Analysis and Testing of Autonomous Operation of an Inverter-Based Microgrid
Pogaku, N., Prodanovic, M., & Green, T. C. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.890003 · Cited by 3,018
Lasseter, R. H. (2003) · 2002 IEEE Power Engineering Society Winter Meeting. Conference Proceedings (Cat. No.02CH37309) · doi:10.1109/pesw.2002.985003 · Cited by 1,997
Axelrod, B., Berkovich, Y., & Ioinovici, A. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916403 · Cited by 1,379
Li, Y. W., & Kao, C.-N. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2022828 · Cited by 1,127
High-efficiency, high step-up DC-DC converters
Zhao, Q., & Lee, F. C. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.807188 · Cited by 1,015
Transformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808
Self-citationHigh Step-Up Converter With Coupled-Inductor
Wai, R.-J., & Duan, R.-Y. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.854023 · Cited by 611
High-Efficiency DC-DC Converter With High Voltage Gain and Reduced Switch Stress
Wai, R.-J., Lin, C.-Y., Duan, R.-Y., & Chang, Y.-R. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888794 · Cited by 450
Novel high-efficiency step-up converter
Tseng, K. C., & Liang, T. J. (2004) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20040022 · Cited by 435
Self-citationNovel High Step-Up DC–DC Converter for Fuel Cell Energy Conversion System
Changchien, S.-K., Liang, T., Chen, J.-F., & Yang, L.-S. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2026364 · Cited by 369
Self-citationHigh boost converter using voltage multiplier
Baek, J.-W., Ryoo, M.-H., Kim, T.-J., Yoo, D.-W., & Kim, J.-S. (2005) · 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005. · doi:10.1109/iecon.2005.1568967 · Cited by 219
High-efficiency DC/DC converter with high voltage gain
Wai, R. J., & Duan, R. Y. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20045067 · Cited by 206
Active Voltage Clamp in Flyback Converters Operating in CCM Mode Under Wide Load Variation
Papanikolaou, N. P., & Tatakis, E. C. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825342 · Cited by 199
Novel forward–flyback hybrid bidirectional DC–DC converter
Zhang, F., & Yan, Y. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2009561 · Cited by 184 · cited 1×
“To employs active clamp technique not only to recycle the leakage inductor energy of the transformer but to constrained the voltage stress is crossed the active switch [12-14], however the tradeoff is higher cost and complex control circuit.”
MethodSix self-lift DC-DC converters, voltage lift technique
Luo, F. L. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.969408 · Cited by 158
Transformerless DC-DC converters with a very high DC line-to-load voltage ratio
Axelrod, B., Berkovich, Y., & Ioinovici, A. (2003) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2003.1205049 · Cited by 147
Soft-Switching Zeta–Flyback Converter With a Buck–Boost Type of Active Clamp
Lin, B., & Hsieh, F.-Y. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.901366 · Cited by 147
Switching-mode DC-DC converter with switched-capacitor-based resonant circuit
Chen, J., & Ioinovici, A. (1996) · IEEE Transactions on Circuits and Systems I Fundamental Theory and Applications · doi:10.1109/81.542284 · Cited by 43
Self-citationSteep conversion ration Ćuk, Zeta, and sepic converters based on a switched coupled-inductor cell
Axelrod, B., Berkovich, Y., Tapuchi, S., & Ioinovici, A. (2008) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2008.4592410 · Cited by 40
Switched-capacitorized DC/DC converters
Luo, F. L. (2009) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2009.5138366 · Cited by 36
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Overview of High-Step-Up Coupled-Inductor Boost Converters
Liu, H., Hu, H., Wu, H., Xing, Y., & Batarseh, I. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2532930 · Cited by 432
Nonisolated High Gain DC–DC Converter for DC Microgrids
Lakshmi, M., & Hemamalini, S. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733463 · Cited by 341
Metadata
- Authors
- Chen, S.-M., Liang, T.-J., Yang, L.-S., & Chen, J.-F.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2011-04
- Volume
- 26
- Issue
- 4
- Pages
- 1146-1153
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2165024739
- Cited by
- 412
- References
- 21
- FWCI
- 11.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.