The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
A High Power Density Single-Phase PWM Rectifier With Active Ripple Energy Storage
Abstract
It is well known that single-phase pulse width modulation rectifiers have second-order harmonic currents and corresponding ripple voltages on the dc bus. The low-frequency harmonic current is normally filtered using a bulk capacitor in the bus, which results in low power density. However, pursuing high power density in converter design is a very important goal in the aerospace applications. This paper studies methods for reducing the energy storage capacitor for single-phase rectifiers. The minimum ripple energy storage requirement is derived independently of a specific topology. Based on the minimum ripple energy requirement, the feasibility of the active capacitor's reduction schemes is verified. Then, we propose a bidirectional buck–boost converter as the ripple energy storage circuit, which can effectively reduce the energy storage capacitance. The analysis and design are validated by simulation and experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pulse Width Modulation for Power Converters
Holmes, D. G., & Lipo, T. A. (2003) · Institute of Electrical and Electronics Engineers eBooks · doi:10.1109/9780470546284 · Cited by 2,384
Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H. (2003) · 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings. · doi:10.1109/cipe.2002.1196712 · Cited by 1,145
PWM Converter Power Density Barriers
Kolar, J. W., Drofenik, U., Biela, J., Heldwein, M. L., Ertl, H., Friedli, T., & Round, S. D. (2007) · 2007 Power Conversion Conference - Nagoya · doi:10.1109/pccon.2007.372914 · Cited by 393
A topology survey of single-stage power factor corrector with a boost type input-current-shaper
Qiao, C., & Smedley, K. M. (2001) · IEEE Transactions on Power Electronics · doi:10.1109/63.923768 · Cited by 389
Kolar, J. W., & Round, S. D. (2006) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20050458 · Cited by 372
Losses in PWM inverters using IGBTs
Casanellas, F. (1994) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19941349 · Cited by 253
DC ripple current reduction on a single-phase PWM voltage-source rectifier
Shimizu, T., Jin, Y., & Kimura, G. (2000) · IEEE Transactions on Industry Applications · doi:10.1109/28.871292 · Cited by 196
Krein, P. T., & Balog, R. S. (2009) · 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2009.4802723 · Cited by 186
DC ripple current reduction on a single-phase PWM voltage source rectifier
Shimizu, T., Jin, Y., & Kimura, G. (2003) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1999.801600 · Cited by 142
Single-stage single-phase parallel power factor correction scheme
Jiang, Y., & Lee, F. C. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1994.373826 · Cited by 135
Tsuno, K., Shimizu, T., Wãda, K., & Ishii, K. (2004) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2004.1355762 · Cited by 51
Cited by
Reliability of Capacitors for DC-Link Applications in Power Electronic Converters—An Overview
Wang, H., & Blaabjerg, F. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2308357 · Cited by 1,384
Krein, P. T., Balog, R. S., & Mirjafari, M. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2186640 · Cited by 520
Energy storage system: Current studies on batteries and power condition system
Zhang, C., Wei, Y.-L., Cao, P.-F., & Lin, M.-C. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.030 · Cited by 493
Xue, L., Shen, Z., Boroyevich, D., Mattavelli, P., & Diaz, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2413815 · Cited by 420
Self-citationReliability of Power Electronic Systems: An Industry Perspective
Falck, J., Felgemacher, C., Rojko, A., Liserre, M., & Zacharias, P. (2018) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2018.2825481 · Cited by 336
Metadata
- Authors
- Wang, R., Wang, F., Boroyevich, D., Burgos, R., Lai, R., Ning, P., & Rajashekara, K.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2011-05
- Volume
- 26
- Issue
- 5
- Pages
- 1430-1443
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2098172743
- Cited by
- 581
- References
- 11
- FWCI
- 9.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.