The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Interleaved Buck Converter Having Low Switching Losses and Improved Step-Down Conversion Ratio
Abstract
This paper proposes a new interleaved buck converter (IBC) having low switching losses and improved step-down conversion ratio, which is suitable for the applications where the input voltage is high and the operating duty is below 50%. It is similar to the conventional IBC, but two active switches are connected in series and a coupling capacitor is employed in the power path, such as Cuk, Sepic, and Zeta converters. The proposed IBC shows that since the voltage stress across all the active switches is half of the input voltage before turn-on or after turn-off when the operating duty is below 50%, the capacitive discharging and switching losses can be reduced considerably. This allows the proposed IBC to have higher efficiency and operate with higher switching frequency. In addition, the proposed IBC has a higher step-down conversion ratio and a smaller output current ripple compared with a conventional IBC. The features, operation principles, and relevant analysis results of the proposed IBC are presented in this paper. The validity of this study is confirmed by the experimental results of prototype converters with 150-200 V input, 24 V/10 A output.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Performance improvements of interleaving VRMs with coupling inductors
Wong, P.-L., Xu, P., Yang, P., & Lee, F. C. (2001) · IEEE Transactions on Power Electronics · doi:10.1109/63.931059 · Cited by 679 · cited 1×
“IN APPLICATIONS where nonisolation, step-down conversion ratio, and high output current with low ripple are required, an interleaved buck converter (IBC) has received a lot of attention due to its simple structure and low control complexity [1]–[6].”
BackgroundAutomotive DC-DC bidirectional converter made with many interleaved buck stages
Garcia, O., Zumel, P., de Castro, A., & Cobos, A. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872379 · Cited by 405
Tapped-inductor buck converter for high-step-down DC-DC conversion
Yao, K., Ye, M., Xu, M., & Lee, F. C. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.850920 · Cited by 278
Cited by
Safayatullah, M., Elrais, M. T., Ghosh, S., Rezaii, R., & Batarseh, I. (2022) · IEEE Access · doi:10.1109/access.2022.3166935 · Cited by 615
“The study in [165] shows that voltage stress across all the active switches is half of the input voltage before turn-on or after turn-off and extra circuitry is not required to balance the current.”
BackgroundChakraborty, S., Vu, H.-N., Hasan, M. M., Tran, D.-D., Baghdadi, M. E., & Hegazy, O. (2019) · Energies · doi:10.3390/en12081569 · Cited by 384
Metadata
- Authors
- Lee, I.-O., Cho, S.-Y., & Moon, G.-W.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2012-08
- Volume
- 27
- Issue
- 8
- Pages
- 3664-3675
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W1995412312
- Cited by
- 204
- References
- 3
- FWCI
- 5.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.