Modeling and Analysis of Switching-Ripple Voltage on the DC Link Between a Diode Rectifier and a Modular Multilevel Cascade Inverter (MMCI)
The DOI matches its Crossref record.
Abstract
This paper focuses on the common dc-link voltage between a three-phase diode rectifier and a modular multilevel cascade inverter based on double-star chopper cells (MMCI-DSCC) for a medium-voltage motor drive. This motor drive can be operated even when no capacitor exists on the dc link. However, a nonnegligible, but predictable, amount of switching-ripple voltage occurs on the dc link. This paper achieves modeling and analysis of the switching-ripple voltage, thus making it possible to design a small-sized dc passive filter consisting of series connection of a film capacitor and a damping resistor. A 400-V, 15-kW downscaled system is used to confirm the effectiveness of the analysis and the dc filter. Experimental results show that the switching-ripple voltage can be attenuated satisfactorily by the dc filter, and that the power loss dissipated in the damping resistor is negligible, compared to the rated power of 15 kW.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Multilevel Converters: Fundamental Circuits and Systems
Akagi, H. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2017.2682105 · Cited by 513
“Note that no dc-link capacitor is required between either diode or DSCC rectifier and the DSCC inverter [72].”
BackgroundSelf-citationMeshram, P. M., & Borghate, V. B. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2317705 · Cited by 405
Analysis of the Phase-Shifted Carrier Modulation for Modular Multilevel Converters
Li, B., Yang, R., Xu, D., Wang, G., Wang, W., & Xu, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2299802 · Cited by 403
Symmetric and Asymmetric Design and Implementation of New Cascaded Multilevel Inverter Topology
Mokhberdoran, A., & Ajami, A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2302873 · Cited by 298
Hagiwara, M., Hasegawa, I., & Akagi, H. (2013) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2256331 · Cited by 291
Self-citationLoss Optimization of MMC by Second-Order Harmonic Circulating Current Injection
Yang, L., Li, Y., Li, Z., Wang, P., Xu, S., & Gou, R. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2751068 · Cited by 97
“ulation (PWM) [17], [18] and nearest level modulation (NLM) [8], [19]–[22].”
BackgroundMethodInfluentialDu, S., Wu, B., & Zargari, N. R. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2740782 · Cited by 56
Metadata
- Authors
- Peng, H., Hagiwara, M., & Akagi, H.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2013-01
- Volume
- 28
- Issue
- 1
- Pages
- 75-84
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2064870220
- Cited by
- 78
- References
- 0
- FWCI
- 7.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.