Modeling and Reduction of Conducted EMI of Inverters With SiC JFETs on Insulated Metal Substrate
The DOI matches its Crossref record.
Abstract
This paper presents the suppression of conducted common-mode (CM) electromagnetic interference (EMI) in an inverter for motor drive with discrete silicon carbide (SiC) JFETs attached on top of the insulated metal substrate (IMS). The EMC performance of the IMS inverter is compared with that of a heat sink inverter in a similar circuit layout. Both are under the same influence of parasitic capacitive couplings between the SiC JFET drains and the substrate base plate. It is found that although the application of conventional CM filters effectively suppresses the emitted noise in the low-frequency (LF) range, the influence of this capacitive coupling results in slight or no improvement in the middle-frequency (MF) and high-frequency (HF) ranges. To deal with this problem, a system CM equivalent circuit model with extracted parasitic parameters is proposed. The model is able to evaluate the filter insertion losses over a broad conducted EMI frequency band, which is essential to achieve an optimized filter design balanced between performance and cost. The presented experimental and calculated results form the step-by-step guideline that effectively suppresses the generated EMI to comply with the standard prescribed by IEC61800-3 C2: Qp.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Modular Multilevel Converters for HVDC Applications: Review on Converter Cells and Functionalities
Nami, A., Liang, J., Dijkhuizen, F., & Demetriades, G. D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2327641 · Cited by 1,042
Oswald, N., Anthony, P., McNeill, N., & Stark, B. H. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2278919 · Cited by 504
Wide Bandgap Devices in AC Electric Drives: Opportunities and Challenges
Morya, A. K., Gardner, M. C., Anvari, B., Liu, L., Yepes, A. G., Doval-Gandoy, J., & Toliyat, H. A. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2892807 · Cited by 444
“The conducted emission caused due to the capacitive coupling of the device terminal with the insulated metal substrate or heat sink in a SiC JFET inverter is investigated in [96] and [97].”
BackgroundA Survey of EMI Research in Power Electronics Systems With Wide-Bandgap Semiconductor Devices
Zhang, B., & Wang, S. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2953730 · Cited by 367
Review and Development of Electric Motor Systems and Electric Powertrains for New Energy Vehicles
Cai, W., Wu, X., Zhou, M., Liang, Y., & Wang, Y. (2021) · Automotive Innovation · doi:10.1007/s42154-021-00139-z · Cited by 302
A Review of Switching Oscillations of Wide Bandgap Semiconductor Devices
Chen, J., Du, X., Luo, Q., Zhang, X., Sun, P., & Zhou, L. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2995778 · Cited by 227
Investigations of 600-V GaN HEMT and GaN Diode for Power Converter Applications
Mitova, R., Ghosh, R., Mhaskar, U., Klikic, D., Wang, M.-X., & Dentella, A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2286639 · Cited by 221
“Compared to GaN, the SiC device technology is in an advanced stage, where particularly, SiC-based diodes have proven their maturity and robustness in industry applications [14]–[17].”
Background
Metadata
- Authors
- Gong, X., Josifović, I., & Ferreira, J. A.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2013-07
- Volume
- 28
- Issue
- 7
- Pages
- 3138-3146
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2018372889
- Cited by
- 73
- References
- 0
- FWCI
- 4.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.