An Integrated 20-kW Motor Drive and Isolated Battery Charger for Plug-In Vehicles
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
For vehicles using grid power to charge the battery, traction circuit components are not normally engaged during the charging time, so there is a possibility to use them in the charger circuit to have an on-board integrated motor drive and battery charger. An isolated high-power three-phase integrated motor drive and charger based on a split-phase permanent magnet motor is presented in this paper. The motor winding connections are reversible by a relay-based switching device for traction and battery charging. In traction mode, the motor is a classical three-phase motor, but in charging mode it is a rotating isolating transformer providing a three-phase voltage source for the inverter to charge the battery. A mathematical model of the motor with six stator windings is presented for an arbitrary phase shift in windings. For the charging mode, the split-phase motor grid synchronization process and charge control are explained including the developed controller. A 20 -kW system is designed and implemented to verify the proper operation of the proposed system. Simulation and practical results are provided to show the system performance in terms of functionality, dynamic response, and efficiency. Moreover, some discussions, recommendations, and limitations are provided to give more practical insights.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advanced Integrated Bidirectional AC/DC and DC/DC Converter for Plug-In Hybrid Electric Vehicles
Lee, Y.-J., Khaligh, A., & Emadi, A. (2009) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2028070 · Cited by 476
Grid-Connected Integrated Battery Chargers in Vehicle Applications: Review and New Solution
Haghbin, S., Lundmark, S., Alakula, M., & Carlson, O. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2187414 · Cited by 345
Self-citationAn integrated fast battery charger for Electric Vehicle
Lacroix, S., Laboure, E., & Hilairet, M. (2010) · 2010 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2010.5729063 · Cited by 150
Cited by
Electric Vehicle Charging Infrastructure: From Grid to Battery
Rivera, S., Kouro, S., Vazquez, S., Goetz, S. M., Lizana, R., & Romero-Cadaval, E. (2021) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2020.3039039 · Cited by 301
A Review of on-Board Integrated Electric Vehicles Charger and a New Single-Phase Integrated Charger
Harbin Institute of Technology, Na, T., Yuan, X., Harbin Institute of Technology, Tang, J., Harbin Institute of Technology, hang, Q. Z., & Harbin Institute of Technology (2019) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2019.00027 · Cited by 68
Ma, M., Chang, Z., Hu, Y., Li, F., Gan, C., & Cao, W. (2018) · IEEE Access · doi:10.1109/access.2017.2779460 · Cited by 52
Raherimihaja, H. J., Zhang, Q., Xu, G., & Zhang, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2978684 · Cited by 45
Three Phase High Power Integrated Battery Charger for Plugin Electric Vehicles
Ali, S. Q., Mascarella, D., Joos, G., Coulombe, T., & Cyr, J.-M. (2015) · 2015 IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2015.7353033 · Cited by 22
Metadata
- Authors
- Haghbin, S., Khan, K., Zhao, S., Alakula, M., Lundmark, S., & Carlson, O.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2013-08
- Volume
- 28
- Issue
- 8
- Pages
- 4013-4029
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W1971520226
- Cited by
- 120
- References
- 3
- FWCI
- 6.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.