A DC–DC Boost Converter With Variation-Tolerant MPPT Technique and Efficient ZCS Circuit for Thermoelectric Energy Harvesting Applications
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This paper presents a dc-dc boost converter with the maximum power point tracking (MPPT) technique for thermoelectric energy harvesting applications. The technique realizes variation tolerance by adjusting the switching frequency of the converter. A finely controlled zero-current switching (ZCS) scheme together with the accurate MPPT technique enhances the overall efficiency of the converter because of an optimal turn-on time generated by a one-shot pulse generator that is proposed. Moreover, the ZCS technique can deal with low- and high-temperature differences applied to the thermoelectric generator. This allows a wider range of conversion ratios compared to those of conventional converters used for thermal energy harvesting. Experimentally, the converter implemented in a 0.35-μm BCDMOS process had a peak efficiency of 72% at the input voltage of 500 mV while supplying a 5.62-V output.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CMOS: Circuit Design, Layout, and Simulation
Baker, R. J. (2010) · doi:10.1002/9780470891179 · Cited by 709
Cited by
Thermoelectricity for IoT – A review
Haras, M., & Skotnicki, T. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.10.013 · Cited by 368
A wearable pyroelectric nanogenerator and self-powered breathing sensor
Xue, H., Yang, Q., Wang, D., Luo, W., Wang, W., Lin, M., Liang, D., & Luo, Q. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.056 · Cited by 337
Investigations of 600-V GaN HEMT and GaN Diode for Power Converter Applications
Mitova, R., Ghosh, R., Mhaskar, U., Klikic, D., Wang, M.-X., & Dentella, A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2286639 · Cited by 221
Fundamental trade-offs between power and data transfer in inductive links for biomedical implants
Dehghanzadeh, P., Zamani, H., & Mandal, S. (2021) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2021.3063376 · Cited by 7
Metadata
- Authors
- Kim, J., & Kim, C.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2013-08
- Volume
- 28
- Issue
- 8
- Pages
- 3827-3833
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2022986742
- Cited by
- 158
- References
- 1
- FWCI
- 7.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.