A Switched-Capacitor-Based Active-Network Converter With High Voltage Gain
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
The voltage gain of traditional boost converter is limited due to the high current ripple, high voltage stress across active switch and diode, and low efficiency associated with large duty ratio operation. High voltage gain is required in applications, such as the renewable energy power systems with low input voltage. A high step-up voltage gain active-network converter with switched-capacitor technique is proposed in this paper. The proposed converter can achieve high voltage gain without extremely high duty ratio. In addition, the voltage stress of the active switches and output diodes is low. Therefore, low voltage components can be adopted to reduce the conduction loss and cost. The operating principle and steady-state analysis are discussed in detail. A prototype with 20-40-V input voltage, 200-V output voltage, and 200-W output power has been established in the laboratory. Experimental results are given to verify the analysis and advantages of the proposed converter.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Axelrod, B., Berkovich, Y., & Ioinovici, A. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916403 · Cited by 1,379
Transformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808
Impedance specifications for stable DC distributed power systems
Feng, X., Liu, J., & Lee, F. C. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/63.988825 · Cited by 582
Novel High Step-Up DC–DC Converter With Coupled-Inductor and Switched-Capacitor Techniques
Hsieh, Y.-P., Chen, J.-F., Liang, T.-J., & Yang, L.-S. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2151828 · Cited by 326
Analysis and Implementation of a Novel Bidirectional DC–DC Converter
Yang, L.-S., & Liang, T.-J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2134060 · Cited by 261
Novel High Step-Up DC–DC Converter With Coupled-Inductor and Voltage-Doubler Circuits
Yang, L.-S., Liang, T.-J., Lee, H.-C., & Chen, J.-F. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2098360 · Cited by 242
Hsieh, Y.-P., Chen, J.-F., Liang, T.-J. P., & Yang, L.-S. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160876 · Cited by 185
Nonisolated High Step-Up Stacked Converter Based on Boost-Integrated Isolated Converter
Park, K.-B., Moon, G.-W., & Youn, M.-J. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2066578 · Cited by 161
Novel DC-DC Multilevel Boost Converter
Rosas‐Caro, J. C., Ramirez, J. M., & García‐Vite, P. M. (2008) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2008.4592260 · Cited by 145
A Novel ZCS-PWM Flyback Converter With a Simple ZCS-PWM Commutation Cell
Wang, C.-M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911917 · Cited by 128
Multilevel Circuit Topologies Based on the Switched-Capacitor Converter and Diode-Clamped Converter
Zhao, J. Y., Han, Y., He, X., Tan, C., Cheng, J., & Zhao, R. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2104330 · Cited by 101
High Step-Up Converter Based on Charge Pump and Boost Converter
Hwu, K. I., & Yau, Y. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2175010 · Cited by 92
PESC Record - IEEE Annual Power Electronics Specialists Conference
Rosas‐Caro, J. C., Ramirez, J. M., & García‐Vite, P. M. (2008) · PESC record · Cited by 68
An Isolated Multicell Intercell Transformer Converter for Applications With a High Step-Up Ratio
Forest, F., Meynard, T. A., Labouré, É., Gélis, B., Huselstein, J.-J., & Brandelero, J. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2209679 · Cited by 37
Cited by
Survey on non‐isolated high‐voltage step‐up dc–dc topologies based on the boost converter
Tofoli, F. L., Pereira, D. D. C., Josias de Paula, W., & Oliveira Júnior, D. D. S. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0605 · Cited by 591
Zhang, Y., Liu, Q., Gao, Y., Li, J., & Sumner, M. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2850020 · Cited by 178
“one multiplier stage in [28], the switched-capacitor-based active network dc–dc converter in [29], and the high voltage gain”
BackgroundResultFardahar, S. M., & Sabahi, M. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2932325 · Cited by 102
Wu, X., Wang, J., Zhang, Y., Du, J., Liu, Z., & Chen, Y. (2021) · Automotive Innovation · doi:10.1007/s42154-021-00163-z · Cited by 42
A novel non-isolated bidirectional DC-DC converter for high voltage gain applications
Reddy, S. R. P., Naik, B. S., & Umanand, L. (2017) · 2017 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC) · doi:10.1109/appeec.2017.8308944 · Cited by 8
Metadata
- Authors
- Tang, Y., Wang, T., & He, Y.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2014-06
- Volume
- 29
- Issue
- 6
- Pages
- 2959-2968
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2037827940
- Cited by
- 317
- References
- 15
- FWCI
- 6.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.