The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Analysis and Implementation of a Novel Bidirectional DC–DC Converter
Abstract
A novel bidirectional dc-dc converter is presented in this paper. The circuit configuration of the proposed converter is very simple. The proposed converter employs a coupled inductor with same winding turns in the primary and secondary sides. In step-up mode, the primary and secondary windings of the coupled inductor are operated in parallel charge and series discharge to achieve high step-up voltage gain. In step-down mode, the primary and secondary windings of the coupled inductor are operated in series charge and parallel discharge to achieve high step-down voltage gain. Thus, the proposed converter has higher step-up and step-down voltage gains than the conventional bidirectional dc-dc boost/buck converter. Under same electric specifications for the proposed converter and the conventional bidirectional boost/buck converter, the average value of the switch current in the proposed converter is less than the conventional bidirectional boost/buck converter. The operating principle and steady-state analysis are discussed in detail. Finally, a 14/42-V prototype circuit is implemented to verify the performance for the automobile dual-battery system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
A natural ZVS medium-power bidirectional DC-DC converter with minimum number of devices
Li, H., Peng, F. Z., & Lawler, J. S. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808965 · Cited by 296
Novel forward–flyback hybrid bidirectional DC–DC converter
Zhang, F., & Yan, Y. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2009561 · Cited by 184 · cited 1×
“In order to recycle the leakageinductor energy and to minimize the voltage stress on the power devices, some literatures present the energyregeneration techniques to clamp the voltage stress on the power devices and to recycle the leakage-inductor energy [18], [19].”
Background
Cited by
Nonisolated High Gain DC–DC Converter for DC Microgrids
Lakshmi, M., & Hemamalini, S. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733463 · Cited by 341
A Switched-Capacitor-Based Active-Network Converter With High Voltage Gain
Tang, Y., Wang, T., & He, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2272639 · Cited by 317
Zhang, Y., Gao, Y., Li, J., & Sumner, M. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2719402 · Cited by 202
A review of non-isolated bidirectional dc-dc converters for energy storage systems
Tytelmaier, K., Husev, O., Veligorskyi, O., & Yershov, R. (2016) · 2016 II International Young Scientists Forum on Applied Physics and Engineering (YSF) · doi:10.1109/ysf.2016.7753752 · Cited by 174
Lee, H.-S., & Yun, J.-J. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2860059 · Cited by 123
Metadata
- Authors
- Yang, L.-S., & Liang, T.-J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2012-01
- Volume
- 59
- Issue
- 1
- Pages
- 422-434
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2135527191
- Cited by
- 261
- References
- 3
- FWCI
- 11.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analysis and Implementation of a Novel Bidirectional DC–DC Converter. https://app.cochat.ai/papers/10.1109/tie.2011.2134060
- The paper
- Yang, L.-S., & Liang, T.-J. (2012). Analysis and Implementation of a Novel Bidirectional DC–DC Converter. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2011.2134060
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
