The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Characterization and Implementation of Dual-SiC MOSFET Modules for Future Use in Traction Converters
Abstract
Silicon (Si) insulated-gate bipolar transistors are widely used in railway traction converters. In the near future, silicon carbide (SiC) technology will push the limits of switching devices in three directions: higher blocking voltage, higher operating temperature, and higher switching speeds. The first silicon carbide (SiC) MOSFET modules are available on the market and look promising. Although they are still limited in breakdown voltage, these wide-bandgap components should improve traction-chain efficiency. Particularly, a significant reduction in the switching losses is expected which should lead to improvements in power-weight ratios. Nevertheless, because of the high switching speed and the high current levels required by traction applications, the implementation of these new modules is critical. An original method is proposed to compare, in terms of stray inductance, several dc bus-bar designs. To evaluate the potential of these new devices, a first set of measurements, based on a single-pulse test-bench, was obtained. The switching behavior of SiC devices was well understood at turn-off and turn-on. To complete this work, the authors use an opposition method to compare Si-IGBT and SiC-MOSFET modules in voltage source inverter operation. For this purpose, a second test-bench, allowing electrical and thermal measurements, was developed. Experimental results confirm the theoretical loss-calculation of the single-pulse tests and the correct operation of up to three modules directly connected in parallel. This analysis provides guidelines for a full SiC inverter design, and prospects for developments in traction applications are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Madhusoodhanan, S., Hatua, K., Bhattacharya, S., Leslie, S., Ryu, S.-H., Das, M., Agarwal, A., & Grider, D. (2012) · 2012 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342807 · Cited by 80
Cited by
Wide Bandgap Devices in AC Electric Drives: Opportunities and Challenges
Morya, A. K., Gardner, M. C., Anvari, B., Liu, L., Yepes, A. G., Doval-Gandoy, J., & Toliyat, H. A. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2892807 · Cited by 444
Influences of Device and Circuit Mismatches on Paralleling Silicon Carbide MOSFETs
Li, H., Munk-Nielsen, S., Wang, X., Maheshwari, R., Beczkowski, S., Uhrenfeldt, C., & Franke, W.-T. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2408054 · Cited by 306
Gu, C., Zheng, Z., Xu, L., Wang, K., & Li, Y. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2416212 · Cited by 221
Li, Z.-F., Nishida, N., Aoki, H., Shibata, H., Liao, C.-C., & Huang, M.-S. (2022) · IEEE Access · doi:10.1109/access.2022.3144575 · Cited by 9
Metadata
- Authors
- Fabre, J., Ladoux, P., & Piton, M.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2015-08
- Volume
- 30
- Issue
- 8
- Pages
- 4079-4090
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2015369167
- Cited by
- 161
- References
- 1
- FWCI
- 7.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characterization and Implementation of Dual-SiC MOSFET Modules for Future Use in Traction Converters. https://app.cochat.ai/papers/10.1109/tpel.2014.2352863
- The paper
- Fabre, J., Ladoux, P., & Piton, M. (2015). Characterization and Implementation of Dual-SiC MOSFET Modules for Future Use in Traction Converters. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2014.2352863
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.