Closed-Loop Discontinuous Modulation Technique for Capacitor Voltage Ripples and Switching Losses Reduction in Modular Multilevel Converters
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
In this paper, a new discontinuous modulation technique is presented for the operation of the modular multilevel converter (MMC). The modulation technique is based on adding a zero sequence to the original modulation signals so that the MMC arms are clamped to the upper or lower terminals of the dc-link bus. The clamping intervals are controlled according to the absolute value of the output current to minimize the switching losses of the MMC. A significant reduction in the capacitor voltage ripples is achieved, especially when operating with low modulation indices. Furthermore, a circulating current control strategy suitable for this modulation technique is also proposed. Simulation and experimental results under various operating points are reported along with evaluation and comparison results against a conventional carrier-based pulse width modulation method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tu, Q., Xu, Z., & Xu, L. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2011.2115258 · Cited by 1,387
Circuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
Perez, M. A., Bernet, S., Rodriguez, J., Kouro, S., & Lizana, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310127 · Cited by 1,346
Pou, J., Ceballos, S., Konstantinou, G., Agelidis, V. G., Picas, R., & Zaragoza, J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336608 · Cited by 406 · cited 2×
“The DPWM was also combined with a closed-loop strategy for the control of the circulating current, using references determined from the instantaneous magnitudes of the reference voltage signal and output current of each phase leg [20]–[22].”
BackgroundMethodSelf-citationModular Multilevel Converter AC Motor Drives With Constant Torque From Zero to Nominal Speed
Antonopoulos, A., Angquist, L., Norrga, S., Ilves, K., Harnefors, L., & Nee, H.-P. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2286217 · Cited by 297
Active Redundant Submodule Configuration in Modular Multilevel Converters
Konstantinou, G., Pou, J., Ceballos, S., & Agelidis, V. G. (2013) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2013.2264950 · Cited by 152
Self-citationAnalysis of voltage balancing limits in modular multilevel converters
Ceballos, S., Pou, J., Choi, S., Saeedifard, M., & Agelidis, V. (2011) · IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2011.6120032 · Cited by 61 · cited 4×
“According to [24], the arm currents in this simplified model are”
BackgroundMethodSelf-citation
Cited by
Dekka, A., Wu, B., Fuentes, R. L., Perez, M., & Zargari, N. R. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2742938 · Cited by 576
“In [169], a discontinuous-PWM scheme is presented for the voltage ripple minimization in an MMC.”
Leon, J. I., Vazquez, S., & Franquelo, L. G. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2017.2726583 · Cited by 481
Li, B., Zhou, S., Xu, D., Yang, R., Xu, D., Buccella, C., & Cecati, C. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2547899 · Cited by 208
“In [21], a discontinuous modulation technique has been adopted for the MMC by clamping the arm with maximum output current to the upper or lower terminals of the dc-link.”
MethodKim, S.-M., Jeong, M.-G., Kim, J., & Lee, K.-B. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2848620 · Cited by 44
“Many researchers have developed various modulation methods to improve the efficiency and output quality of the MMC [15]–[23].”
BackgroundZhou, S., Li, B., Guan, M., Zhang, X., Xu, Z., & Xu, D. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2833503 · Cited by 38
Metadata
- Authors
- Picas, R., Ceballos, S., Pou, J., Zaragoza, J., Konstantinou, G., & Agelidis, V. G.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2015-09
- Volume
- 30
- Issue
- 9
- Pages
- 4714-4725
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W1986901662
- Cited by
- 116
- References
- 6
- FWCI
- 6.54
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.