A Bidirectional Three-Phase Push–Pull Converter With Dual Asymmetrical PWM Method
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
This paper proposes a new bidirectional three-phase push-pull converter that has a simple structure and achieves zero-voltage switching turn-on of switches. Also, due to use of a single inductor, an imbalance among phase currents on the low-voltage high-current side is trivial in the proposed converter although no current sharing control is employed. In this paper, a new dual asymmetrical pulse width modulation (PWM) switching method is proposed for bidirectional power flow control with seamless mode change. The proposed switching method offers reduced circulating current and makes the converter easier to implement compared to the PWM plus phase shift-based control method since it is a general PWM method having two independent duty cycle controls on each side. Experimental results from a 3-kW prototype are provided to validate the proposed concept.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The three-phase bidirectional push-pull converter demonstrates higher efficiency and superior dynamic performance in high-power scenarios, making it highly practical for applications such as energy storage systems.”
From Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review (2025) · cites this paper as [77]
In the citing paper
“By extending the traditional single-phase push-pull topology into a three-phase structure, this design not only increases power transfer capability but also improves current balancing and harmonic characteristics within the system.”
From Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review (2025) · cites this paper as [77]
Citations
Cites
A three-phase soft-switched high-power-density DC/DC converter for high-power applications
De Doncker, R. W. A. A., Divan, D. M., & Kheraluwala, M. H. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.67533 · Cited by 2,535
Bai, H., & Mi, C. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2005103 · Cited by 1,121 · cited 1×
“In order to overcome the problems, many advanced modulation strategies for the DAB converter have been presented [12]–[18].”
BackgroundA new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782 · cited 1×
“A BDC based on dual half-bridge converters [5] has halved the component count compared to the dual full-bridge topologies and guarantees volt–sec balance of the transformer.”
BackgroundA Bidirectional DC–DC Converter for an Energy Storage System With Galvanic Isolation
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.909248 · Cited by 780
Closed Form Solution for Minimum Conduction Loss Modulation of DAB Converters
Krismer, F., & Kolar, J. W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2157976 · Cited by 635
Pwm control of dual active bridge: Comprehensive analysis and experimental verification
Jain, A. K., & Ayyanar, R. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2070519 · Cited by 567
Oggier, G. G., Garcia, G. O., & Oliva, A. R. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2072966 · Cited by 498
Zhao, B., Song, Q., Liu, W., & Sun, W. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2210374 · Cited by 345
A ZVS Bidirectional DC–DC Converter With Phase-Shift Plus PWM Control Scheme
Xiao, H., & Xie, S. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915188 · Cited by 299
A PWM Plus Phase-Shift Control Bidirectional DC–DC Converter
Xu, D., Zhao, C., & Fan, H. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.826485 · Cited by 284
A Novel Three-Phase High-Power Soft-Switched DC/DC Converter for Low-Voltage Fuel Cell Applications
Liu, C., Johnson, A., & Lai, J.-S. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.858259 · Cited by 211
Wang, Z., & Li, H. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160284 · Cited by 200 · cited 1×
“The PWM plus phase shift (PPS) method [6] has been applied to the three-phase BDC based on the current-fed converter on the LVS and the voltage-fed converter on the HVS [34], [35].”
MethodActively clamped bidirectional flyback converter
Chen, G., Lee, Y.-S., Hui, S. Y. R., Xu, D., & Wang, Y. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.857957 · Cited by 174 · cited 2×
“BDCs based on flyback converters [1]–[3] can achieve soft-switching and clamping of surge voltage using auxiliary components.”
BackgroundMethodZhang, Z., Ouyang, Z., Thomsen, O. C., & Andersen, M. A. E. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2159515 · Cited by 166
Analysis and design of a three-phase offline DC-DC converter with high-frequency isolation
Prasad, A. R., Ziogas, P. D., & Manias, S. N. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.148448 · Cited by 137 · cited 1×
“In order to overcome the problem associated with high device stresses when implemented with the single-phase dc–dc converter mentioned above, the three-phase dc–dc converter has been introduced in high-power applications [11], [19]–[36].”
BackgroundA Three-Phase Current-Fed DC/DC Converter With Active Clamp for Low-DC Renewable Energy Sources
Cha, H., Choi, J., & Enjeti, P. N. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2003256 · Cited by 113
Pan, X., & Rathore, A. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2315834 · Cited by 105 · cited 1×
“In particular, isolated BDCs have been used for the applications where bidirectional power flow with high-voltage stepup ratio and/or galvanic isolation is required, and a variety of topologies with high-frequency transformers have been proposed in [1]–[10].”
MethodZhang, Z., Thomsen, O. C., & Andersen, M. A. E. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2134051 · Cited by 102
A ZCS Bidirectional Flyback DC/DC Converter
Chung, H. S.-H., Cheung, W.-L., & Tang, K. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.836643 · Cited by 93
Oliveira, S. V. G., & Barbi, I. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2084971 · Cited by 90
Li, W., Wu, H., Yu, H., & He, X. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2162852 · Cited by 87 · cited 1×
“BDCs based on flyback converters [1]–[3] can achieve soft-switching and clamping of surge voltage using auxiliary components.”
BackgroundAnalysis and design of a three-phase offline DC-DC converter with high frequency isolation
Prasad, A. R., Ziogas, P. D., & Manias, S. N. (2003) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1988.25155 · Cited by 87
Engel, S. P., Soltau, N., Stagge, H., & Doncker, R. W. D. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2283868 · Cited by 86 · cited 1×
“A three-phase DAB converter [11], [20], [29] has basically voltage-fed natures on both low-voltage side (LVS) and highvoltage side (HVS).”
BackgroundA Three-Phase Current-Fed Push–Pull DC–DC Converter With Active Clamp for Fuel Cell Applications
Lee, S., Park, J., & Choi, S. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2096477 · Cited by 80 · cited 2×
“Generally, the three-phase dc–dc converter has several advantages over its single-phase counterpart: easy switch selection due to reduced current rating, reduction of the input and output filters’ volume due to increased effective switching frequency by a factor of three, and reduction in transformer size due to bette…”
BackgroundMethodSelf-citationA Three-Phase Current-Fed Push–Pull DC–DC Converter
Andersen, R. L., & Barbi, I. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2007727 · Cited by 79
Optimized Design of Bi-Directional Dual Active Bridge Converter for Low-Voltage Battery Charger
Jeong, D.-K., Ryu, M.-H., Kim, H.-G., & Kim, H. (2014) · Journal of Power Electronics · doi:10.6113/jpe.2014.14.3.468 · Cited by 60
Three‐phase interleaved high‐step‐up converter with coupled‐inductor‐based voltage quadrupler
Hu, Y., Xiao, W., Li, W., & He, X. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2013.0751 · Cited by 58
A Three-Phase Bidirectional DC-DC Converter for Automotive Applications
Su, G.-J., & Tang, L. (2008) · 2008 IEEE Industry Applications Society Annual Meeting · doi:10.1109/08ias.2008.286 · Cited by 50 · cited 1×
“A three-phase DAB converter [11], [20], [29] has basically voltage-fed natures on both low-voltage side (LVS) and highvoltage side (HVS).”
BackgroundThree-Phase (LC)(L)-Type Series-Resonant Converter With Capacitive Output Filter
Almardy, M., & Bhat, A. K. S. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2076365 · Cited by 45
Pan, X., Prasanna, U. R., & Rathore, A. K. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2226217 · Cited by 45
Wen, H., & Su, B. (2015) · Journal of Power Electronics · doi:10.6113/jpe.2015.15.1.18 · Cited by 44 · cited 1×
“In order to overcome the problems, many advanced modulation strategies for the DAB converter have been presented [12]–[18].”
BackgroundA phase-shift three-phase bidirectional series resonant DC/DC converter
Mirzahosseini, R., & Tahami, F. (2011) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2011.6119468 · Cited by 34 · cited 1×
“A phase-shift three-phase bidirectional series-resonant converter [33] processes power in a sinusoidal manner and achieves soft switching, and therefore, the switching losses and noise can be significantly reduced.”
BackgroundAguillón-García, J., & Moon, G. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2090833 · Cited by 30 · cited 1×
“Since the cross-sectional area of the center leg of the core is twice them of the both side legs, the center leg is cut out so as to have equal width [25].”
BackgroundA new three-phase interleaved isolated boost converter with active clamp for fuel cells
Cha, H., Choi, J., & Han, B.-M. (2008) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2008.4592106 · Cited by 30 · cited 11×
“The power flow controller can also be implemented with either HVS voltage regulation, as shown in Fig.”
MethodInfluentialThree-phase bidirectional DC-DC converter with enhanced current sharing capability
Wang, Z., & Li, H. (2010) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2010.5617850 · Cited by 27 · cited 1×
“A sophisticated control strategy has been proposed for balancing the three-phase inductor currents [37], making the controller to be complicated.”
BackgroundOliveira, D. S., Antunes, F. L. M., & Silva, C. E. A. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.882937 · Cited by 21
Modular Snubberless Bidirectional Soft-Switching Current-Fed Dual 6-Pack (CFD6P) DC/DC Converter
Bal, S., Rathore, A. K., & Srinivasan, D. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2333771 · Cited by 20 · cited 1×
“In order to overcome the problem associated with high device stresses when implemented with the single-phase dc–dc converter mentioned above, the three-phase dc–dc converter has been introduced in high-power applications [11], [19]–[36].”
BackgroundApplication of three-phase resonant converter in high power DC supplies
Tanavade, S. S., Suryawanshi, H. M., Thakre, K. L., & Chaudhari, M. A. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20045274 · Cited by 10
Research works printed but not linked: 1
- pressman, 2007, Current-mode and current-fed topologies, Switching Power Supply Design, 161
Cited by
Topologies and Control Schemes of Bidirectional DC–DC Power Converters: An Overview
Gorji, S. A., Sahebi, H. G., Ektesabi, M., & Rad, A. B. (2019) · IEEE Access · doi:10.1109/access.2019.2937239 · Cited by 439
“CONVERTER [28], [34]”
MethodReview of Dual-Active-Bridge Converters With Topological Modifications
Li, L., Xu, G., Sha, D., Liu, Y., Sun, Y., & Su, M. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3258418 · Cited by 166
Moradisizkoohi, H., Elsayad, N., & Mohammed, O. A. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2908130 · Cited by 79
Tong, Y., Salhi, I., Wang, Q., Lu, G., & Wu, S. (2025) · Energies · doi:10.3390/en18092312 · Cited by 60
“To further enhance the performance of this topology in high-power applications, reference [77] proposes a three-phase bidirectional push-pull converter.”
V2G based bidirectional EV charger topologies and its control techniques: a review
Rana, R., Saggu, T. S., Letha, S. S., & Bakhsh, F. I. (2024) · Discover Applied Sciences · doi:10.1007/s42452-024-06297-z · Cited by 69
Metadata
- Authors
- Kwon, M., Park, J., & Choi, S.
- Affiliations
- Seoul National University of Science and Technology (KR)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2016-03
- Volume
- 31
- Issue
- 3
- Pages
- 1887-1895
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2174860748
- Cited by
- 47
- References
- 38
- Citations by year
- 2026: 1 · 2025: 6 · 2024: 6 · 2023: 7 · 2022: 5 · 2021: 8 · 2020: 5 · 2019: 7 · 2018: 1 · 2017: 1
- FWCI
- 0.32
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Funders
- National Research Foundation of Korea
- Korea government (2014R1A2A2A01003724)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Keywords
- push-pull converter, asymmetrical pulse-width modulation, zero-voltage switching, circulating current suppression, seamless mode transition, bidirectional power flow control, single inductor
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.