The DOI matches its Crossref record; 121 of the 121 references it cites were found in a registry or an index; 3 of the 67 sources its claims cite were checked for support.
Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review
Open accessAbstract
Electric Vehicles (EV) significantly contribute to reducing carbon emissions and promoting sustainable transportation. Among EV technologies, hybrid energy storage systems (HESS), which combine fuel cells, power batteries, and supercapacitors, have been widely adopted to enhance energy density, power density, and system efficiency. Bidirectional DC-DC converters are pivotal in HESS, enabling efficient energy management, voltage matching, and bidirectional energy flow between storage devices and vehicle systems. This paper provides a comprehensive review of bidirectional DC-DC converter topologies for EV applications, which focuses on both non-isolated and isolated designs. Non-isolated topologies, such as Buck-Boost, Ćuk, and interleaved converters, are featured for their simplicity, efficiency, and compactness. Isolated topologies, such as dual active bridge (DAB) and push-pull converters, are featured for their high voltage gain and electrical isolation. An evaluation framework is proposed, incorporating key performance metrics such as voltage stress, current stress, power density, and switching frequency. The results highlight the strengths and limitations of various converter topologies, offering insights into their optimization for EV applications. Future research directions include integrating wide-bandgap devices, advanced control strategies, and novel topologies to address challenges such as wide voltage gain, high efficiency, and compact design. This work underscores the critical role of bidirectional DC-DC converters in advancing energy-efficient and sustainable EV technologies.
Overview
CoChat Summary
TL;DR
This review surveys bidirectional DC-DC converter topologies for hybrid energy storage systems in electric vehicles, covering non-isolated and isolated designs. It proposes an evaluation framework and compares topologies using metrics such as voltage/current stress, efficiency, power density, voltage gain range, switching frequency, device count, and common ground.
Key findings
- Non-isolated topologies reviewed include Buck/Boost, Buck-Boost, Ćuk, SEPIC/Zeta, interleaved, three-level, cascaded, and switched-capacitor; isolated topologies include flyback, push-pull, Ćuk, forward, DAB, dual half-bridge, and half-full.
- The proposed evaluation framework uses eight metrics for non-isolated converters (voltage stress, current stress, conversion efficiency, power density, voltage gain range, switching frequency, number of devices, common ground) and six for isolated converters (voltage stress, current stress, number of components, power density, conversion efficiency, transformer design).
- The three-level bidirectional converter case study reports typical efficiency of 90–94%, switching frequency of 30–100 kHz, and ability to handle supercapacitor voltage from 16 V to 48 V. The BYDBDC300-750 industrial module is described with rated input 200–450 V, output 16–60 V, maximum output power 15 kW, adaptive switching frequency 50–80 kHz, peak efficiency 93.5%, volume 4.2 L, weight 5.3 kg, power density 3.6 kW/L, and 92–94% efficiency over a 10–15 kW load range; under a 450 V bus, maximum voltage stress per transistor is approximately 225 V.
- Cascaded topologies show estimated efficiency ranges from 85–96% depending on sub-topologies, e.g., interleaved + switched-capacitor at 92–96% and Buck + Boost at 85–89%. Future directions include wide-bandgap devices, advanced control strategies, and novel topologies.
Methods
- Design: comprehensive review and classification of bidirectional DC-DC converter topologies for HESS in EVs, with qualitative comparison rather than primary experimental work.
- Data/sample: literature on non-isolated and isolated bidirectional DC-DC converters, plus an industrial case study of the BYDBDC300-750 three-level converter used in BYD vehicles.
- Analysis: comparative tables and radar charts scoring topologies from 0 to 5 across selected metrics; the paper states scores for key metrics such as conversion efficiency and power density were derived from literature experimental results and standardized benchmarks.
Limitations
- The paper states that advantages and disadvantages of topologies are relative, no single topology excels in all evaluation metrics, and efficiency/power density depend on operating frequency, rated power, and component count, making single-criterion comparison impossible.
- The paper notes cascaded converters have larger size, higher manufacturing cost, overall efficiency determined by the product of sub-converter efficiencies, and inherited drawbacks of sub-topologies.
- Evident from the text: the review does not describe a systematic search or selection protocol, reports no primary experimental validation, and does not fully detail how radar-chart scores were assigned beyond stating they came from literature and benchmarks.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures










Verification
Claims the paper makes
2 Valid · 12 Not valid · 66 Not checked · 61 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The ´ Cuk converter, widely utilized in EVs, is renowned for its consistently stable input and output currents [44].”
What the sources say
- Could not verifycites [44] Song, 2014, Non-isolated bidirectional soft-switching SEPIC/ZETA converter with reduced ripple currents, J. Power Electron. sourceExperimental — accuracy not yet measured
The Introduction lists Ćuk among non-isolated bidirectional converters and discusses automotive applications of bidirectional converters generally. It does not describe Ćuk input or output currents as stable, or establish that Ćuk converters are widely used in EVs. Searches for Ćuk and input/output current characteristics found no passage addressing those claims. (LLM, conf=0.73)
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“These systems impose stringent performance requirements on bidirectional converters, with evaluation metrics spanning multiple aspects, including thermal performance, dynamic response speed, voltage conversion ratio, input current ripple, voltage and current stress, conversion efficiency, power density, device count, voltage conversion slope, and the presence of common ground [11].”
What the sources say
- Partly supportedcites [11] Wang, 2022, Review of bidirectional DC–DC converter topologies for hybrid energy storage system of new energy vehicles, Green Energy Intell. Transp. sourceExperimental — accuracy not yet measured
Split into 2 atoms — 0 confirmed, 2 partially supported, 0 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Due to its reduced switching and conduction losses, this topology typically achieves an efficiency range of 90-94%, even under varying load conditions.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“For instance, under a 450 V bus, the maximum voltage stress for a single transistor is approximately 225 V.”
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“This converter utilizes the forward structure to enable bidirectional power flow [81].”
What the sources say
- Not checked — no full text of the sourcecites [81] Khodabakhshian, 2016, Forward-type resonant bidirectional DC–DC converter, IET Power Electron. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
35 more claims
Create a free account to see all 141 claims and to verify the 2 references still open.
- It may state two separate claims as one. 78
- Probably not a substantial claim. 39
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.2.5. Topologies of Isolated Bidirectional DAB DC-DC Converters · p. 17
“| ´ Cuk Figure 5b | ND 1 - D | 2 | 4 | 2 | 2 |”
§ 2.2.1. Topologies of Isolated Bidirectional Flyback DC-DC Converters · p. 13
“Figure 5. Basic isolated bidirectional DC-DC converters topology classification. ( a ) Flyback. ( b ) PushPull. ( c ) ´ Cuk. ( d ) Forward.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ To cite this version: · p. 1
“Yan Tong, Issam Salhi, Qin Wang, Shengyu Wu. Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review.”
§ Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review · p. 2
“Yan Tong 1 , Issam Salhi 2 , Qin Wang 1,3, * , Gang Lu 4 and Shengyu Wu 4”
Citations
Cites
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182 · cited 1×
“The continuous use of fossil fuels, including oil and natural gas, along with the rising levels of greenhouse gas emissions, has caused serious consequences for the climate and environment [2].”
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123 · cited 1×
“This bidirectional topology is realized by replacing the unidirectional power switches in the Buck and Boost converters with bidirectional power switches, enabling the circuit to facilitate bidirectional power flow [39].”
Khaligh, A., & Li, Z. (2010) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2010.2047877 · Cited by 1,817 · cited 1×
“To address this, the system incorporates a SC as an auxiliary energy storage unit [20].”
CO₂ and Greenhouse Gas Emissions
Ritchie, H., & Roser, M. (2020) · Cited by 1,517
Zhao, B., Yu, Q., & Sun, W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2180928 · Cited by 932 · cited 1×
“EPSC is particularly beneficial in applications requiring wide voltage gain ranges and improved efficiency under light-load conditions [103].”
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782 · cited 1×
“Reference [93] presents a converter based on the dual half-bridge topology, where the primary side employs a current-fed half-bridge structure, and the secondary side uses a voltage-fed half-bridge structure [94].”
Hybrid electric vehicles and their challenges: A review
Hannan, M. A., Azidin, F. A., & Mohamed, A. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.08.097 · Cited by 766 · cited 1×
“EVs comprise five fundamental systems that facilitate their operation [15].”
Friedlingstein, P., Houghton, R. A., Marland, G., Hackler, J., Boden, T. A., Conway, T. J., Canadell, J. G., Raupach, M. R., Ciais, P., & Le Quéré, C. (2010) · Nature Geoscience · doi:10.1038/ngeo1022 · Cited by 663
The impact of plug-in hybrid electric vehicles on distribution networks: A review and outlook
Green, R. C., Wang, L., & Alam, M. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.015 · Cited by 640 · cited 1×
“When the powertrain demand is minimal, the power battery independently supplies energy; during rapid power fluctuations, the SC delivers instantaneous energy; and when the power battery lacks sufficient energy, the FC activates to maintain the energy supply [24].”
Hydrogen energy systems: Technologies, trends, and future prospects
Sadeq, A. M., Homod, R. Z., Hussein, A. K., Togun, H., Mahmoodi, A., Isleem, H. F., Patil, A. R., & Moghaddam, A. H. (2024) · Science of The Total Environment · doi:10.1016/j.scitotenv.2024.173622 · Cited by 528 · cited 1×
“With the global expansion of renewable energy sources (RES), solutions that leverage renewable electricity to decarbonize end-use energy have garnered significant attention [1].”
Cited by
Taghizad-Tavana, K., Nezhad, A. E., Hagh, M. T., Canani, A., & Safari, A. (2025) · Eng—Advances in Engineering · doi:10.3390/eng6110309 · Cited by 38
“A bidirectional interface converter links the AC and DC buses, enabling controlled power exchange between them [87].”
Safety Management Technologies for Wireless Electric Vehicle Charging Systems: A Review
Niu, S., Jia, Q., Yang, H., Yang, C., & Jian, L. (2025) · Electronics · doi:10.3390/electronics14122380 · Cited by 26
Ranjbaran, P., Ebrahimi, J., Bakhshai, A., & Jain, P. K. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3625535 · Cited by 23
“To enhance the performance of HESSs in EV applications, various dual-stage architectures have been proposed and investigated [33], [34].”
Alrubaie, A. J., Salem, M., Swadi, M., Yahya, K. A., Kamarol, M., & Dawsari, S. A. A. (2025) · Energy Reports · doi:10.1016/j.egyr.2025.11.073 · Cited by 19
“7(a) and (b) (Tong et al., 2025).”
Bridging renewable energy sources with non-isolated DC-DC converters: challenges and innovations
Mishra, S., Ahmad, R., & Srivastava, A. (2025) · Discover Electronics · doi:10.1007/s44291-025-00110-w · Cited by 10
“Similarly, in electric vehicles, bidirectional non-isolated converters facilitate regenerative braking and efficient energy transfer between the battery and motor drive [15].”
Metadata
- Authors
- Tong, Y., Salhi, I., Wang, Q., Lu, G., & Wu, S.
- Affiliations
- Hong Kong Polytechnic University (HK)
- Centre National de la Recherche Scientifique (FR)
- State Grid Corporation of China (China) (CN)
- Corresponding author
- Wang, Qin
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2025-05-01
- Volume
- 18
- Issue
- 9
- Pages
- 2312
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W4410005456
- Cited by
- 60
- References
- 117
- Citations by year
- 2026: 40 · 2025: 20
- FWCI
- 13.51
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- PolyU Institutional Research Archive (Hong Kong Polytechnic University) (publishedVersion, cc-by)
- HAL (submittedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- State Grid Corporation of China (SGHAYJ00NNJS2400004)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- bidirectional DC-DC converter, hybrid energy storage, electric vehicles, converter topology, non-isolated converter, isolated converter, buck-boost converter, Cuk converter, interleaved converter, dual active bridge converter, push-pull converter, wide bandgap devices, voltage stress, power density, switching frequency, energy management
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review. https://app.cochat.ai/papers/10.3390/en18092312
- The paper
- Tong, Y., Salhi, I., Wang, Q., Lu, G., & Wu, S. (2025). Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review. Energies. https://doi.org/10.3390/en18092312
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.