Frequency-Domain Thermal Modeling and Characterization of Power Semiconductor Devices
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The thermal behavior of power electronics devices has been a crucial design consideration, because it is closely related to the reliability and also the cost of the converter system. Unfortunately, the widely used thermal models based on lumps of thermal resistances and capacitances have their limits to correctly predict the device temperatures, especially when considering the thermal grease and heat sink attached to the power semiconductor devices. In this paper, frequency-domain approach is applied to the modeling of the thermal dynamics for power devices. The limits of the existing RC lump-based thermal networks are explained from a point of view of frequency domain. Based on the discovery, a more advanced thermal model developed in the frequency domain is proposed, which can be easily established by characterizing the slope variation from the bode diagram of the typically used Foster thermal network. The proposed model can be used to predict not only the internal temperature behaviors of the devices but also the behaviors of the heat flowing out of the devices. As a result, more correct estimation of device temperature can be achieved when considering the cooling conditions for the devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ma, K., Liserre, M., Blaabjerg, F., & Kerekes, T. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2312335 · Cited by 460 · cited 1×
“It has been demonstrated in [5], that the thermal dynamics under various time scales either inside or outside the power semiconductors could contribute to quantified damage of the component.”
BackgroundSelf-citation
Cited by
Overview of Real-Time Lifetime Prediction and Extension for SiC Power Converters
Ni, Z., Lyu, X., Yadav, O. P., Singh, B. N., Zheng, S., & Cao, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2962503 · Cited by 261
Reliability of Power Electronic Systems for EV/HEV Applications
Blaabjerg, F., Wang, H., Vernica, I., Liu, B., & Davari, P. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3031041 · Cited by 249
Self-citationReview of SiC MOSFET based three-phase inverter lifetime prediction
Ni, Z., Lyu, X., Yadav, O. P., & Cao, D. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7930819 · Cited by 40
“Device internal temperature and heat flowing outside devices are predicted Four temperatures (junction temperature, case temperature, heat-sink temperature, and ambient temperature) need to be measured [48] [49]”
BackgroundTang, Y., Zhan, C., Zhu, L., Wang, W., Gou, Y., & Ji, S. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3470907 · Cited by 18
“The Foster model can be extracted from the transient thermal impedance, which is usually accessible from the device datasheet or thermal impedance measurement, while the Cauer model is available based on the physics of device geometry and material property [14], [15].”
Metadata
- Authors
- Ma, K., He, N., Liserre, M., & Blaabjerg, F.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2016-10
- Volume
- 31
- Issue
- 10
- Pages
- 7183-7193
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2193374437
- Cited by
- 193
- References
- 1
- FWCI
- 6.90
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Frequency-Domain Thermal Modeling and Characterization of Power Semiconductor Devices. https://app.cochat.ai/papers/10.1109/tpel.2015.2509506
- The paper
- Ma, K., He, N., Liserre, M., & Blaabjerg, F. (2016). Frequency-Domain Thermal Modeling and Characterization of Power Semiconductor Devices. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2015.2509506
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.