Dyna-C: A Minimal Topology for Bidirectional Solid-State Transformers
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This paper presents a topology for bidirectional solid-state transformers with a minimal device count. The topology, referenced as dynamic-current or Dyna-C, has two current-source inverter stages with a high-frequency galvanic isolation, requiring 12 switches for four-quadrant three-phase ac/ac power conversion. The topology has voltage step-up/down capability, and the input and output can have arbitrary power factors and frequencies. Further, the Dyna-C can be configured as isolated power converters for single- or multiterminal dc, and single- or multiphase ac systems. The modular nature of the Dyna-C lends itself to be connected in series and/or parallel for high-voltage high-power applications. The proposed converter topology can find a broad range of applications such as isolated battery chargers, uninterruptible power supplies, renewable energy integration, smart grid, and power conversion for space-critical applications including aviation, locomotives, and ships. This paper outlines various configurations of the Dyna-C, as well as the relative operation and controls. The converter functionality is validated through simulations and experimental measurements of a 50-kVA prototype.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power Electronic Traction Transformer—Medium Voltage Prototype
Zhao, C., Dujic, D., Mester, A., Steinke, J. K., Weiss, M., Lewdeni-Schmid, S., Chaudhuri, T., & Stefanutti, P. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2278960 · Cited by 478
Cited by
Hannan, M. A., Ker, P. J., Lipu, M. S. H., Choi, Z. H., Rahman, M. S. A., Muttaqi, K. M., & Blaabjerg, F. (2020) · IEEE Access · doi:10.1109/access.2020.2967345 · Cited by 339
“This topology needs a complex switching method as well as a large number of switching devices [33].”
MethodSoft-Switching Solid-State Transformer With Reduced Conduction Loss
Zheng, L., Kandula, R. P., & Divan, D. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3030795 · Cited by 105
“Existing circuits in this class include dynamic-current converter (Dyna-C) converter [25], ZVS-isolated high-frequency (HF)-link converter [26], and”
BackgroundSelf-citationAbu-Siada, A., Budiri, J., & Abdou, A. (2018) · Electronics · doi:10.3390/electronics7110298 · Cited by 69
“In [19], a minimal single and three phase topologies were presented.”
BackgroundMethodInfluential
Metadata
- Authors
- Chen, H., Prasai, A., & Divan, D.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-02
- Volume
- 32
- Issue
- 2
- Pages
- 995-1005
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2323038461
- Cited by
- 85
- References
- 1
- FWCI
- 5.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.