Efficiency Assessment of Modular Multilevel Converters for Battery Electric Vehicles
Open accessThe DOI matches its Crossref record; 20 of the 21 references it cites were found in a registry or an index.
Abstract
This paper evaluates the performance of modular multilevel converters with integrated battery cells when used as traction drives for battery electric vehicles. In this topology, individual battery cells are connected to the dc link of the converter submodules, allowing the highest flexibility for the discharge and recharge. The traditional battery management system of battery electric vehicles is replaced by the control of the converter, which individually balances all the cells. The performance of the converter as a traction drive is assessed in terms of torque–speed characteristic and power loss for the full frequency range, including field weakening. Conduction and switching losses for the modular multilevel converter are calculated using a simplified model, based on the datasheet of power devices. The performance of the modular multilevel converter is then compared with a traditional two-level converter. The loss model of the modular multilevel converter is finally validated by experimental tests on a small-scale prototype of traction drive.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
An innovative modular multilevel converter topology suitable for a wide power range
Lesnicar, A., & Marquardt, R. (2004) · 2003 IEEE Bologna Power Tech Conference Proceedings, · doi:10.1109/ptc.2003.1304403 · Cited by 2,908 · cited 1×
“If the arm current is positive, the cells with the lowest SOCs are activated; if the arm current is negative, the cells with the highest SOCs are activated [14]–[16].”
BackgroundVector Control and Dynamics of AC Drives
Novotny, D. W., & Lipo, T. A. (1996) · doi:10.1093/oso/9780198564393.001.0001 · Cited by 1,841
Experimental Validation of a Battery Dynamic Model for EV Applications
Tremblay, O., & Dessaint, L.-A. (2009) · World Electric Vehicle Journal · doi:10.3390/wevj3020289 · Cited by 1,223 · cited 1×
“The battery cells have been modeled by a parameterized dynamic model to take into account the variation of the voltage with the SOC and the current [23]”
MethodClassification, Terminology, and Application of the Modular Multilevel Cascade Converter (MMCC)
Akagi, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143431 · Cited by 1,172 · cited 1×
“due to voltage mismatch between the phase legs [9], [10].”
BackgroundMaharjan, L., Inoue, S., Akagi, H., & Asakura, J. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2014868 · Cited by 590 · cited 1×
“If the arm current is positive, the cells with the lowest SOCs are activated; if the arm current is negative, the cells with the highest SOCs are activated [14]–[16].”
BackgroundDesign and Operation of a Hybrid Modular Multilevel Converter
Zeng, R., Xu, L., Yao, L., & Williams, B. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2320822 · Cited by 455 · cited 1×
“The modulation index m in the hypothesis of balanced cells is defined as [12], [13]”
BackgroundMeshram, P. M., & Borghate, V. B. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2317705 · Cited by 405 · cited 1×
“due to voltage mismatch between the phase legs [9], [10].”
BackgroundBierhoff, M. H., & Fuchs, F. W. (2005) · 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) · doi:10.1109/pesc.2004.1355283 · Cited by 338 · cited 1×
“According to the technical literature, the conduction and switching losses of an IGBT-based two-level inverter are given by [20]”
MethodKim, J., Shin, J., Chun, C., & Cho, B. H. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2158553 · Cited by 278 · cited 1×
“However, voltage imbalance between the cells appears when the battery is charged or discharged several times, because of the differences in leakage currents and chemical characteristics of battery cells; this causes progressive damage of battery cells and reduction of their service life time [2].”
BackgroundDesign and Control of Modular Multilevel Converters for Battery Electric Vehicles
Quraan, M., Yeo, T., & Tricoli, P. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2408435 · Cited by 204 · cited 4×
“A component count and a qualitative cost assessment between the proposed MMC configuration and alternative configurations with a two-level inverter and different active BMS topologies are summarized in Table I [8].”
BackgroundMethodSelf-citation
Research works printed but not linked: 3
- 2013, IGBT-Module, FZ300R12KE3G Datasheet
- 2013, HEXFET Power MOSFET, AUIRFS8409-7P Datasheet
- tricoli, 2010, Controllo di velocita e posizione dei motori elettrici, Nozioni Complementari Di Macchine Ed Azionamenti Elettrici
Cited by
Items 101–150 of 150
Mashayekh, A., Pohlmann, S., Estaller, J., Kuder, M., Lesnicar, A., Eckerle, R., & Weyh, T. (2023) · Electricity · doi:10.3390/electricity4030014 · Cited by 5
Challa, R. V. K., Mikkili, S., & Bonthagorla, P. K. (2022) · IETE Journal of Research · doi:10.1080/03772063.2022.2143438 · Cited by 5
Loss and reliability analysis of various solid-state battery reconfiguration topologies
Xu, Y., Liu, Z., Zhu, J., Liu, P., & Wei, T. (2023) · Frontiers in Energy Research · doi:10.3389/fenrg.2023.1298694 · Cited by 4
Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller
Rath, D., Patra, A. K., Rout, B., Subudhi, D. K., & Kar, S. K. (2021) · Lecture notes in electrical engineering · doi:10.1007/978-981-16-7076-3_26 · Cited by 4
Spina, I., & Cervone, A. (2021) · IEEE International Conference on Compatibility, Power Electronics and Power Engineering · doi:10.1109/cpe-powereng50821.2021.9501229 · Cited by 4
Predictive Control of 4-level Flying Capacitor Inverter for Electric Car Applications
Hamedani, P., Garcia, C. F., Flores‐Bahamonde, F., Sadr, S., & Rodríguez, J. (2022) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc53976.2022.9767266 · Cited by 4
Battery Losses In a MMC for BEVS Application
Dannier, A., Brando, G., Spina, I., & Iannuzzi, D. (2018) · The Open Electrical & Electronic Engineering Journal · doi:10.2174/1874129001812010098 · Cited by 4
Hanzl, C., Stöttner, J., Hölzle, M., & Endisch, C. (2023) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2023-ecceasia54778.2023.10213901 · Cited by 3
Grid Independent Operation of 200 hp DC Drive Using Solar-Wind-Battery Hybrid Power Source
Rath, D., Kar, S. K., Patra, A. K., & Mohapatra, S. (2021) · International Conference in Advances in Power, Signal, and Information Technology (APSIT) · doi:10.1109/apsit52773.2021.9641443 · Cited by 3
Sahoo, R., Tiwari, A., & Roy, M. (2025) · Electrical Engineering · doi:10.1007/s00202-025-02951-w · Cited by 3
Review on Capacity Optimization of Traction Transformer for High-Speed Railway
Li, R., Xiao, L., Lü, J., & Li, X. (2022) · Energy Engineering · doi:10.32604/ee.2022.020803 · Cited by 3
Performance of Modular Multilevel Converter in Electric Vehicles Charging Station
S.Jaanaa Rubavathy, P. V. S. A. (2024) · Journal of Electrical Systems · doi:10.52783/jes.1467 · Cited by 3
“The advantages on the specific applications are suppression of circulating current [14], energy storing in EV batteries [15], balancing the capacitor Voltage [16], and controlling the current in Upper arm and Lower arm [17], Hybrid Renewable Energy System [18], Motor Drives [19].”
BackgroundAnalysis of Dual Two‐Level Converters for Multilevel Performance
Gupta, S. K., & Singh, O. (2024) · Wiley eBooks · doi:10.1002/9781394167371.ch1 · Cited by 3
Hussain, A., Raj, K. Y., Rajashekara, K., Krishnamoorthy, H. S., & Atcitty, S. (2019) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2019.8911867 · Cited by 3
Wang, D., Piegari, L., Liu, J., Simone, D. D., Song, S., & Chen, X. (2020) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec39645.2020.9124207 · Cited by 3
“As the transportation electrification develops, research of MMC for electric vehicle (EV) applications with respect to control strategies [2]–[5] and efficiency assessment [6], [7] has also been carried out.”
BackgroundSelf-citationControl and Optimization of Lattice Converters
Mei, Z., Fang, J., & Goetz, S. M. (2022) · Electronics · doi:10.3390/electronics11040594 · Cited by 3
Highly Integrated Electric Drive with Modular Reconfigurable Batteries
Tashakor, N., Amirrezai, M., Kacetl, J., Fang, J., & Goetz, S. M. (2022) · IEEE Industrial Electronics Society Annual On-Line Conference (ONCON) · doi:10.1109/oncon56984.2022.10126793 · Cited by 3
Gao, Z., & Lu, Q. (2018) · IEEJ Transactions on Electrical and Electronic Engineering · doi:10.1002/tee.22703 · Cited by 2
Minimizing the battery losses in MMC via Zero-Sequence Voltage injection: an open challenge
Spina, I., Brando, G., & Dannier, A. (2024) · International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) · doi:10.1109/speedam61530.2024.10609190 · Cited by 2
“In these systems, the activation of each DC source is contingent on the immediate voltage needs of the converter, causing a variable current to flow through each source [14].”
BackgroundWu, C., Chen, L. R., Yang, W.-R., Xu, B., & Chen, G. (2025) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias62731.2025.11061541 · Cited by 2
“These systems enable both AC power supply and charge balancing among battery modules [9].”
Chaikhy, H., Es-saadi, M., & Khafallah, M. (2022) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v13.i3.pp1295-1304 · Cited by 2
“Thanks to the multilevel inverter, efficiency is improved in standard driving cycles [15], [16], costs of the two systems are compared [13], [15].”
BackgroundSimplified low-cost experimental setup for battery loss evaluation in MMC converters
Spina, I., Fedele, E., & Cervone, A. (2022) · International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) · doi:10.1109/speedam53979.2022.9842092 · Cited by 2
Zolfi, P., Ebrahimian, A., S., S. I. H., Weise, N. D., & EL-Refaie, A. M. (2022) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon49645.2022.9968425 · Cited by 2
“A comprehensive efficiency assessment of the MLCs for battery EVs is also presented in [7] considering the control strategies of the converters.”
BackgroundYousofi‐Darmian, S., & Barakati, S. M. (2023) · Iranian Journal of Science and Technology Transactions of Electrical Engineering · doi:10.1007/s40998-023-00621-w · Cited by 1
Sakurai, T., & Haga, H. (2026) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.20250283 · Cited by 1
Voltage Control Comparison for Low-Power DC-DC Converters in EVs: PI and Explicit MPC
Rossi, M., Piegari, L., Dezza, F. C., Mauri, M., & Carmeli, M. S. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591195 · Cited by 1
“The standard power conversion system of a battery electrical vehicle (BEV) is constituted by a battery pack, comprising a series of low voltage cells, driven by a conventional two-level (2L) converter [1].”
BackgroundSelf-citationAhi, K. (2018) · International Journal of High Speed Electronics and Systems · doi:10.1142/s0129156418400141 · Cited by 1
Design of a Bidirectional DC/AC Converter with Battery Charging/Discharging/Standing Balance Control
Chen, L.-R., Xu, B., Liu, C.-S., Peng, S.-W., & Wu, C.-H. (2019) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2019-ecceasia42246.2019.8796978 · Cited by 1
“To this end, the literature [9]-[10] proposes a multi-level inverter that is spliced by a half-bridge circuit to greatly reduce the number of switches and has a system with the fault tolerance.”
BackgroundSimplified control system for grid-tied modular multilevel based energy storage
Dobroskok, N. A., Lavrinovskiy, V. S., & Trusova, E. S. (2023) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v14.i1.pp405-412 · Cited by 1
Salvadores, T., Pereda, J. E., & Poblete, P. (2022) · IEEE Annual Southern Power Electronics Conference · doi:10.1109/spec55080.2022.10058272 · Cited by 1
“The MMC’s efficiency in EVs regarding switching and conduction losses is assessed in [11], showing that MMCs have higher losses than conventional two level converters at full loads.”
BackgroundKrishnachaitanya, D., Chitra, A., Al‐Greer, M., & Biswas, S. S. (2025) · IET Power Electronics · doi:10.1049/pel2.12843 · Cited by 1
A Series-Connected Converter for Multi-Phase Wind Turbine Generator
Sun, B., & Gao, C. (2019) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2019.8927044 · Cited by 1
“The issues mentioned above can be solved by using modular multilevel converter (MMC) [3]-[7].”
BackgroundA DC-Autotransformer based Multilevel Inverter for Automotive ApplicationsPreprint
Grimm, F., Wood, J., & Baghdadi, M. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2011.12164 · Cited by 1
“To overcome the disadvantage of large DC-link capacitors, [27] suggested to connect the MMC to the battery modules directly.”
BackgroundHigh Conversion Ratio Converter Using Half-Bridge Sub-Modules
Roy, S., & Pandey, R. (2020) · International Journal of Engineering Technology and Management Sciences · doi:10.46647/ijetms.2020.v04i05.020
MPC based Controller Design of Battery Integrated Modular Multilevel Converter
Xu, F., Guo, Z., Liu, Q., Chen, H., & Qu, Y. (2021) · Chinese Control Conference (CCC) · doi:10.23919/ccc52363.2021.9550574
“1, the current of the upper and lower bridge arms ijt, ijb are composed of two parts, circle current icir,j and phase currentij [2, 11].”
BackgroundViatkin, A. (2023) · Springer theses · doi:10.1007/978-3-031-24712-5_1
LiBAT: A High-Performance AC Battery System for Transport Applications
Miranda, A. C., Dahlhaus, J., Dordevic, O., Eckhardt, J., Fäßler, V., Peuvedic, J.-M. L., Riley, P. H., & Wasner, J. (2023) · Designs · doi:10.3390/designs7030074
“Furthermore, active battery management and charging capability can also be included [17,18], posing further motivation from a system perspective.”
BackgroundIntroduction to Modular Energy Storage Systems
Tashakor, N. (2023) · Green energy and technology · doi:10.1007/978-3-031-36843-1_1
Modulation and Scheduling Techniques
Tashakor, N. (2023) · Green energy and technology · doi:10.1007/978-3-031-36843-1_4
Highly Integrated Electric Drive based-on Smart DC Batteries Topology and Control
Tashakor, N., Amirrezai, M., Keshavarzi, D., & Goetz, S. M. (2023) · European Conference on Power Electronics and Applications · doi:10.23919/epe23ecceeurope58414.2023.10264499
“However, the advantages offered by these systems might not be enough to justify the added costs of these systems if they are just integrated into the conventional structures [22-26].”
BackgroundNovel Pulse Generator for Advanced TMS Applications: A Multilevel Converter Approach
Lohse, B., Högerl, T., Sorokina, N., Kuder, M., & Weyh, T. (2024) · International Conference on Communications, Information, Electronic and Energy Systems (CIEES) · doi:10.1109/ciees62939.2024.10811377
“Additionally, the system recovers a significant portion of the energy stored in the magnetic field, leading to a high overall efficiency [14], [15] compared to previous systems.”
Balachandran, A., Jonsson, T., & Eriksson, L. (2025) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2025-01-8557
Nguyen, N. T., Phan, A. T. N., Nguyen, H. T., Tran, V. T., & Do, D. T. (2025) · Technical Education Science/Giáo dục Kỹ thuật · doi:10.54644/jte.2025.1998
Onyenenue, O. D. (2023) · cIRcle (University of British Columbia) · doi:10.14288/1.0431931
High‐Gain Two‐Leg Inverter for Sensorless BLDC Motor Drives in EV Applications
Naresh, K., Suresh, D., & Pattnaik, S. (2026) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.70349
Chabbah, F., Kraiem, S., Slama, J. B. H., & Kreutzer, O. (2025) · IEEE International Conference on Signal, Control and Communication (SCC) · doi:10.1109/scc66964.2025.11424876
“• High Efficiency: MMCs minimize switching losses, enhancing energy efficiency crucial for cost savings in various applications [1] [2].”
Stöttner, J., Hanzl, C., & Endisch, C. (2026) · Energy Reports · doi:10.1016/j.egyr.2026.109473 · Cited by 1
Reconfigurable Battery Module Integration and Performance Evaluation for Electric Vehicle
Kumar, S., Sahu, L. K., & Patel, R. N. (2026) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet69291.2026.11686919
“Power electronics switches provide better efficiency on the lower voltage with high frequency [23].”
A Review of Cell Balancing Techniques for Electric Vehicle Battery Management System
Shende, S. A., & Kute, U. T. (2026) · International Conference on Innovation & Growth in Next-Gen Intelligent Technology & Engineering (IGNITE) · doi:10.1109/ignite69592.2026.11705848
Comparison of Open-End Winding Topology and NPC for Electric Vehicle Application
Simone, D. D., Öztürk, S., Piegari, L., & Shafi, S. (2026) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/pemc69244.2026.11726124
“A modular multilevel converter (MMC)-based topology for EV applications, where each submodule of the MMC is connected to a battery cell, thereby removing the need for a battery management system, has been proposed in [15].”
Self-citation
Metadata
- Authors
- Quraan, M., Tricoli, P., D Arco, S., & Piegari, L.
- Affiliations
- University of Birmingham (GB)
- Politecnico di Milano (IT)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-03
- Volume
- 32
- Issue
- 3
- Pages
- 2041-2051
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2338604703
- Cited by
- 148
- References
- 21
- Citations by year
- 2026: 5 · 2025: 13 · 2024: 12 · 2023: 22 · 2022: 22 · 2021: 25 · 2020: 16 · 2019: 12 · 2018: 16 · 2017: 4
- FWCI
- 5.07
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Virtual Community of Pathological Anatomy (University of Castilla La Mancha) (submittedVersion, other-oa)
- University of Birmingham Research Portal (University of Birmingham) (submittedVersion, other-oa)
- Funders
- Engineering and Physical Sciences Research Council (EP/L023261/1)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Keywords
- modular multilevel converter, battery electric vehicles, traction drives, battery balancing, power loss modeling, conduction losses, switching losses, field weakening, torque-speed characteristics, prototype testing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.