Efficiency Assessment of Modular Multilevel Converters for Battery Electric Vehicles
Open accessThe DOI matches its Crossref record; 20 of the 21 references it cites were found in a registry or an index.
Abstract
This paper evaluates the performance of modular multilevel converters with integrated battery cells when used as traction drives for battery electric vehicles. In this topology, individual battery cells are connected to the dc link of the converter submodules, allowing the highest flexibility for the discharge and recharge. The traditional battery management system of battery electric vehicles is replaced by the control of the converter, which individually balances all the cells. The performance of the converter as a traction drive is assessed in terms of torque–speed characteristic and power loss for the full frequency range, including field weakening. Conduction and switching losses for the modular multilevel converter are calculated using a simplified model, based on the datasheet of power devices. The performance of the modular multilevel converter is then compared with a traditional two-level converter. The loss model of the modular multilevel converter is finally validated by experimental tests on a small-scale prototype of traction drive.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
An innovative modular multilevel converter topology suitable for a wide power range
Lesnicar, A., & Marquardt, R. (2004) · 2003 IEEE Bologna Power Tech Conference Proceedings, · doi:10.1109/ptc.2003.1304403 · Cited by 2,908 · cited 1×
“If the arm current is positive, the cells with the lowest SOCs are activated; if the arm current is negative, the cells with the highest SOCs are activated [14]–[16].”
BackgroundVector Control and Dynamics of AC Drives
Novotny, D. W., & Lipo, T. A. (1996) · doi:10.1093/oso/9780198564393.001.0001 · Cited by 1,841
Experimental Validation of a Battery Dynamic Model for EV Applications
Tremblay, O., & Dessaint, L.-A. (2009) · World Electric Vehicle Journal · doi:10.3390/wevj3020289 · Cited by 1,223 · cited 1×
“The battery cells have been modeled by a parameterized dynamic model to take into account the variation of the voltage with the SOC and the current [23]”
MethodClassification, Terminology, and Application of the Modular Multilevel Cascade Converter (MMCC)
Akagi, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143431 · Cited by 1,172 · cited 1×
“due to voltage mismatch between the phase legs [9], [10].”
BackgroundMaharjan, L., Inoue, S., Akagi, H., & Asakura, J. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2014868 · Cited by 590 · cited 1×
“If the arm current is positive, the cells with the lowest SOCs are activated; if the arm current is negative, the cells with the highest SOCs are activated [14]–[16].”
BackgroundDesign and Operation of a Hybrid Modular Multilevel Converter
Zeng, R., Xu, L., Yao, L., & Williams, B. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2320822 · Cited by 455 · cited 1×
“The modulation index m in the hypothesis of balanced cells is defined as [12], [13]”
BackgroundMeshram, P. M., & Borghate, V. B. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2317705 · Cited by 405 · cited 1×
“due to voltage mismatch between the phase legs [9], [10].”
BackgroundBierhoff, M. H., & Fuchs, F. W. (2005) · 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) · doi:10.1109/pesc.2004.1355283 · Cited by 338 · cited 1×
“According to the technical literature, the conduction and switching losses of an IGBT-based two-level inverter are given by [20]”
MethodKim, J., Shin, J., Chun, C., & Cho, B. H. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2158553 · Cited by 278 · cited 1×
“However, voltage imbalance between the cells appears when the battery is charged or discharged several times, because of the differences in leakage currents and chemical characteristics of battery cells; this causes progressive damage of battery cells and reduction of their service life time [2].”
BackgroundDesign and Control of Modular Multilevel Converters for Battery Electric Vehicles
Quraan, M., Yeo, T., & Tricoli, P. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2408435 · Cited by 204 · cited 4×
“A component count and a qualitative cost assessment between the proposed MMC configuration and alternative configurations with a two-level inverter and different active BMS topologies are summarized in Table I [8].”
BackgroundMethodSelf-citation
Research works printed but not linked: 3
- 2013, IGBT-Module, FZ300R12KE3G Datasheet
- 2013, HEXFET Power MOSFET, AUIRFS8409-7P Datasheet
- tricoli, 2010, Controllo di velocita e posizione dei motori elettrici, Nozioni Complementari Di Macchine Ed Azionamenti Elettrici
Cited by
A General Review of Multilevel Inverters Based on Main Submodules: Structural Point of View
Vijeh, M., Rezanejad, M., Samadaei, E., & Bertilsson, K. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2890649 · Cited by 473
“solid state transformers [36]–[39]), motor drives (which used in transportation/traction [40]–[47], marine propulsion [48]–[52], mine hoists [53], conveyors [54], [55]), industrial application”
BackgroundA Review of Multilevel Inverter Topologies in Electric Vehicles: Current Status and Future Trends
Poorfakhraei, A., Narimani, M., & Emadi, A. (2021) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2021.3063550 · Cited by 424
“In another research, MMC inverter for EVs is evaluated from the efficiency point of view [95].”
BackgroundModular Multilevel Converters for Transportation Electrification: Challenges and Opportunities
Ronanki, D., & Williamson, S. S. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2792330 · Cited by 345
“The control strategy of the MMC along with the SOC balancing of batteries and the comparison of the MMC with different active battery management systems (BMSs) are reported in [55].”
Modular Multilevel Converters: Recent Achievements and Challenges
Perez, M. A., Ceballos, S., Konstantinou, G., Pou, J., & Aguilera, R. P. (2021) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2021.3060791 · Cited by 327
“each storage module can be controlled independently in order to work at different operating points, increasing the overall efficiency [163].”
BackgroundReview of Multilevel Inverters for PV Energy System Applications
Bughneda, A., Salem, M., Richelli, A., Ishak, D., & Alatai, S. (2021) · Energies · doi:10.3390/en14061585 · Cited by 219
“The performance of modular multilevel converters that contain battery cells has been evaluated by [104] in electric vehicles for traction drive.”
BackgroundA Review of Modulation and Control Techniques for Multilevel Inverters in Traction Applications
Poorfakhraei, A., Narimani, M., & Emadi, A. (2021) · IEEE Access · doi:10.1109/access.2021.3056612 · Cited by 179
“Efficiency is increased by using multilevel structures in standard driving cycles [30], [31].”
Choudhury, S., Bajaj, M., Dash, T., Kamel, S. M., & Jurado, F. (2021) · Energies · doi:10.3390/en14185773 · Cited by 179
Carne, G. D., Maroufi, S. M., Beiranvand, H., Angelis, V. D., D’Arco, S., Gevorgian, V., Waczowicz, S., Mather, B. A., Liserre, M., & Hagenmeyer, V. (2024) · Electric Power Systems Research · doi:10.1016/j.epsr.2024.110963 · Cited by 184
Self-citationModular‐multilevel converter topologies and applications – a review
Priya, M., Ponnambalam, P., & Muralikumar, K. (2018) · IET Power Electronics · doi:10.1049/iet-pel.2018.5301 · Cited by 155
MMC-Based SRM Drives With Decentralized Battery Energy Storage System for Hybrid Electric Vehicles
Gan, C., Sun, Q., Wu, J., Kong, W., Shi, C., & Hu, Y. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2846622 · Cited by 147
“A battery energy storage system for EVs is composed of several battery packs connected in series to satisfy a voltage and capacity specification [45], [46].”
BackgroundInfluentialKomsiyska, L., Buchberger, T., Diehl, S., Ehrensberger, M., Hanzl, C., Hartmann, C., Hölzle, M., Kleiner, J., Lewerenz, M., Liebhart, B., et al. (2021) · Energies · doi:10.3390/en14185989 · Cited by 143
Recent Advancements in Submodule Topologies and Applications of MMC
Ali, S., Ling, Z., Tian, K., & Huang, Z. M. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.2990689 · Cited by 119
“A detailed control analysis is presented in [221], and a hybrid MMC that combines batteries and supercapacitors is shown in [222] and [223].”
MethodChang, F., Ilina, O., Lienkamp, M., & Voss, L. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2854756 · Cited by 111
“One step further, if the condition of no diode conduction still applies, due to the same resemblance of switching and conducting behaviors, this loss model can also be used for other MOSFET multilevel inverter topologies besides the CHB, such as active neutral-point clamped (ANPC) or the classic multilevel modular con…”
BackgroundMethodEroğlu, F., Kurtoğlu, M., & Vural, A. M. (2021) · IET Renewable Power Generation · doi:10.1049/rpg2.12042 · Cited by 80
Cascaded Multiport Converter for SRM-Based Hybrid Electrical Vehicle Applications
Sun, Q., Wu, J., Gan, C., Si, J., Guo, J., & Hu, Y. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2909187 · Cited by 75
“In [30],”
An Overview of Applications of the Modular Multilevel Matrix Converter
Díaz, M., Cárdenas, R., Ibaceta, E., Mora, A., Urrutia-Ortiz, M., Espinoza, M., Rojas, F., & Wheeler, P. W. (2020) · Energies · doi:10.3390/en13215546 · Cited by 71
“The M2C is already a well established methodology for HVDC applications [36] and other applications, such as STATCOMs [4], WECSs [5,6], motor drives [14,15,72] and electric vehicles in the automotive industry [73,74] have been proposed in the literature.”
MethodMultilevel Inverters for Electric Aircraft Applications: Current Status and Future Trends
Wang, D., Hemming, S., Yang, Y., Poorfakhraei, A., Zhou, L., Liu, C., & Emadi, A. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3296284 · Cited by 69
“In [59], [60], and [61], the efficiency advantage of different multilevel topologies for automotive applications has been confirmed.”
BackgroundReview of Cell-Balancing Schemes for Electric Vehicle Battery Management Systems
Ashraf, A., Ali, B., Alsunjury, M. S. A., Goren, H. H., Kilicoglu, H., Hardan, F., & Tricoli, P. (2024) · Energies · doi:10.3390/en17061271 · Cited by 75
Self-citationKrishnachaitanya, D., & Chitra, A. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3071375 · Cited by 61
“Primarily, this configuration is focused on reducing the stress on power semiconductor devices and to eliminate the complimentary possibilities in the topology [59]–[66].”
BackgroundStructural Analysis in Reconfigurable Battery Systems for Active Fault Diagnosis
Schmid, M., Gebauer, E., & Endisch, C. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3049573 · Cited by 59
Influence of Current Ripples in Cascaded Multilevel Topologies on the Aging of Lithium Batteries
Chang, F., Roemer, F., & Lienkamp, M. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2989145 · Cited by 58
“multilevel topologies in stationary or on-board BESSs, due to the advantages [21]–[24], [61]–[63] in different aspects.”
BackgroundKurtoğlu, M., Eroğlu, F., Arslan, A. O., & Vural, A. M. (2018) · International Transactions on Electrical Energy Systems · doi:10.1002/etep.2763 · Cited by 57
Kersten, A., Theliander, O., Grunditz, E. A., Thiringer, T., & Bongiorno, M. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2921852 · Cited by 51
“Several investigations regarding the efficiency, low-voltage output harmonics, and fault tolerance of multilevel traction inverters can be found in [15]–[19], but missing in the available literature is the consideration and quantification of the battery losses.”
BackgroundTheliander, O., Kersten, A., Kuder, M., Han, W., Grunditz, E. A., & Thiringer, T. (2020) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2020.3026662 · Cited by 51
A Review on Modular Multilevel Converters in Electric Vehicles
Hariri, R., Sebaaly, F., & Kanaan, H. Y. (2020) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon43393.2020.9255037 · Cited by 53
“Many attempts for MMC applied to EVs have been proposed in the recent years [33, 34, 37-41].”
BackgroundInfluentialTashakor, N., Li, Z., & Goetz, S. M. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3018168 · Cited by 45
“The basic procedure for calculating switching loss is based on [45] to provide a rough approximation of total switching loss for the MMSPC.”
MethodReview and comparative analysis on dc-dc converters used in electric vehicle applications
Jagadeesh, I., & Indragandhi, V. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/623/1/012005 · Cited by 43
Gao, F., Gu, X., Ma, Z., & Zhang, C. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2925284 · Cited by 43
Badawy, M. O., Sharma, M., Hernandez, C., Elrayyah, A. Y., Guerra, S., & Coe, J. (2021) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2021.3089668 · Cited by 41
A Bidirectional Versatile Buck–Boost Converter Driver for Electric Vehicle Applications
Castaño, C. G., Restrepo, C., Kouro, S., Vidal‐Idiarte, E., & Calvente, J. (2021) · Sensors · doi:10.3390/s21175712 · Cited by 39
“Therefore, the power converter shown in Figure 1 is implemented using a step-up DC-DC in cascade with a DC-AC traction inverter (see Figure 2 DC-DC + DC-AC block) [6].”
BackgroundMethodEfficiency evaluation of MMSPC/CHB topologies for automotive applications
Korte, C., Specht, E., Hiller, M., & Goetz, S. M. (2017) · IEEE International Conference on Power Electronics and Drive Systems (PEDS) · doi:10.1109/peds.2017.8289145 · Cited by 36
“However, recent research has investigated the use of multilevel inverters in other applications such as Battery Energy Storage Systems (BESSs) or smaller motor drives in EVs [7]–[9].”
BackgroundInfluentialLiang, H., Guo, L., Song, J., Yang, Y. B., Zhang, W., & Qi, H. (2018) · Energies · doi:10.3390/en11040873 · Cited by 36
“As described in Reference [14], the output voltage of submodule ujki consists of three parts: the AC grid component uACjki, the DC circulating component uDCjki, and the AC circulating component uXjki.”
BackgroundInfluentialNegahdari, A., Yepes, A. G., Doval‐Gandoy, J., & Toliyat, H. A. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2830310 · Cited by 33
“In general, when the working regime is far from nominal, the machine-side converter efficiency is usually comparatively low [21].”
BackgroundInfluentialLow-Frequency Scheduler for Optimal Conduction Loss in Series/Parallel Modular Multilevel Converters
Tashakor, N., Iraji, F., & Goetz, S. M. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3110213 · Cited by 35
“In case of completely balanced modules, the switching loss can be calculated based on the procedure proposed in [54].”
MethodHassani, M. J., Azimi, E., Khodaparast, A., Adabi, J., & Pouresmaeil, E. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3135623 · Cited by 33
Generic Dynamically Reconfigurable Battery With Integrated Auxiliary Output and Balancing Capability
Tashakor, N., Kacetl, J., Fang, J., Li, Z., & Goetz, S. M. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3263809 · Cited by 32
“tributed to a modular battery system, regardless of the integrated auxiliary port [14], [16], [35], [45], [51], [68], [69], [70].”
BackgroundAn Improved Harmonics Mitigation Scheme for a Modular Multilevel Converter
Kumar, A. R., Bhaskar, M. S., Subramaniam, U., Almakhles, D. J., Padmanaban, S., & Holm‐Nielsen, J. B. (2019) · IEEE Access · doi:10.1109/access.2019.2946617 · Cited by 31
“The MLDCLI can also operate under symmetrical as well as asymmetrical configurations and applications includes renewable energy sources and battery electric vehicles [23], [24].”
BackgroundSimone, D. D., Tricoli, P., D’Arco, S., & Piegari, L. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2969375 · Cited by 29
“Using the same converter for different tasks leads to a higher global efficiency in comparison with standard two-level inverters [9] with consequent more range of the BEV.”
BackgroundSelf-citationAn improved modulation method for modular multilevel converters based on particle swarm optimization
Qin, X., Hu, W., Tang, Y., Huang, Q. Z., Chen, Z., & Blaabjerg, F. (2023) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2023.109136 · Cited by 25
Ma, Y., Lin, H., Wang, Z., & Ze, Z. (2018) · Energies · doi:10.3390/en12010096 · Cited by 25
“In [21,22], th DC and fundamental circulating current are regulated to balance the SOC among phases and between arms respectively.”
BackgroundDevelopment of an enhanced multilevel converter using an efficient fundamental switching technique
Kar, P. K., Priyadarshi, A., & Karanki, S. B. (2020) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2020.105960 · Cited by 25
Stöttner, J., Hanzl, C., & Endisch, C. (2022) · Electric Power Systems Research · doi:10.1016/j.epsr.2022.108009 · Cited by 25
Control System to Balance Internal Currents of a Multilevel Current-Source Inverter
Cossutta, P., Aguirre, M. P., Engelhardt, M. A., & Valla, M. I. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2740846 · Cited by 25
“control [4]–[6], and interface with alternative energy sources [7]–[9], among many others [10].”
BackgroundChalla, R. V. K., Mikkili, S., & Bonthagorla, P. K. (2022) · Journal of Control Automation and Electrical Systems · doi:10.1007/s40313-022-00953-8 · Cited by 24
“The MMC for grid integration of photovoltaic conversion plants and battery energy management in electric vehicle systems is given in (Li et al., 2017; Mao et al., 2017; Quraan et al., 2016; Nademi et al., 2015; Rojas et al., 2017).”
BackgroundTashakor, N., Kacetl, J., Keshavarzi, D., & Goetz, S. M. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3263775 · Cited by 25
“The required dc-link voltage for the inverter–motor set will be the reference value for V dc1 , and the value of m that brings the dc link closest to this optimal value should be selected [5], [24], [64], [65].”
BackgroundRauf, A. M., Abdel-Monem, M., Geury, T., & Hegazy, O. (2023) · Energies · doi:10.3390/en16104133 · Cited by 22
Stöttner, J., Rauscher, A., & Endisch, C. (2022) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2022.108259 · Cited by 20
Ranjbaran, P., Ebrahimi, J., Bakhshai, A., & Jain, P. K. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3625535 · Cited by 23
Motwani, J. K., Liu, J., Boroyevich, D., Burgos, R. P., Zhou, Z., & Dong, D. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3361908 · Cited by 19
Brando, G., Dannier, A., Spina, I., & Tricoli, P. (2017) · Energies · doi:10.3390/en10101628 · Cited by 19
“The new model explains why the SOC balancing algorithm has a different response for different operating conditions of the BEV and, hence, the standard SOC balancing technique [17,18] can be considered as a special case.”
Self-citationWang, Z., Lin, H., & Ma, Y. (2019) · Energies · doi:10.3390/en12112151 · Cited by 19
“In References [10,16], the MMC-BESS was applied in battery electric vehicles and the efficiency of this topology was assessed.”
MethodSimple Switching Strategies for dv/dt Reduction in SiC-Device-Based Modular Multilevel Converters
Li, X., Liu, R., Ke, Z., Pan, J., Hu, B., Na, R., Xu, L., & Wang, J. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3202564 · Cited by 18
“follows the methods proposed in [47], and the device char-”
MethodChoudhary, A., Kumar, R., Letha, S. S., Bakhsh, F. I., Singh, A., & Khan, M. J. (2024) · IET Power Electronics · doi:10.1049/pel2.12564 · Cited by 17
Kundu, S., Bhowmick, S., & Banerjee, S. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2018.5076 · Cited by 17
Terbrack, C., Stöttner, J., & Endisch, C. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3183859 · Cited by 17
“Since resistance plays such an important role, the number of components in the load path is particularly significant [1]–[3].”
BackgroundInfluentialDirect State-of-Charge Balancing Control for Modular Multilevel Converter Integrating Batteries
Barresi, M., Simone, D. D., & Piegari, L. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3510876 · Cited by 16
“The circulating ( i circ , k ) and output phase ( i ph , k ) currents given by [5] From (1) and (2), the output phase voltage and circulating voltage components can be retrieved as follows : Consequently, the upper and lower arm voltages can be also expressed as follows [5]: Three main…”
Self-citationD’Arco, S., Quraan, M., Tricoli, P., & Piegari, L. (2016) · International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) · doi:10.1109/speedam.2016.7525982 · Cited by 16
Self-citationKumar, A. R., Deepa, T., Padmanaban, S., & Kothari, D. P. (2019) · Innovations in Power and Advanced Computing Technologies (i-PACT) · doi:10.1109/i-pact44901.2019.8960205 · Cited by 16
“The MLDCLI is used for various applications including renewable energy sources and battery electric vehicles [10], [11].”
MethodOn-Line Multistep Predictive Spectral Control of the Distortion in Switched-Mode Converters
Korte, C., Luetje, T., Tashakor, N., & Goetz, S. M. (2022) · IEEE Access · doi:10.1109/access.2022.3202978 · Cited by 15
Kurtoğlu, M., & Vural, A. M. (2022) · International Transactions on Electrical Energy Systems · doi:10.1155/2022/2169357 · Cited by 19
Prospective Submodule Topologies for MMC-BESS and Its Control Analysis with HBSM
Ali, S., Bogarra, S., Khan, M. M., Taha, A., Phyo, P. P., & Byun, Y.-C. (2022) · Electronics · doi:10.3390/electronics12010020 · Cited by 15
Design and control of battery charger for electric vehicles using modular multilevel converters
Quraan, M., Abu‐Khaizaran, M., Sa'ed, J. A., Hashlamoun, W. A., & Tricoli, P. (2020) · IET Power Electronics · doi:10.1049/pel2.12018 · Cited by 14
“The efficiency assessment of the converter for BEVs has been introduced by the authors in [32].”
BackgroundMethodSelf-citationTashakor, N., Dusengimana, J., Bayati, M., Kersten, A., Schotten, H. D., & Goetz, S. M. (2023) · Batteries · doi:10.3390/batteries9020099 · Cited by 14
“The integration of the power electronics allows for rearranging the connection of each module within the battery cell string/array to balance the individual state of charges (SOC) or temperatures of the modules [27–29], perform fault prevention or mitigation [30,31], increase the system efficiency [32,33], and regulat…”
BackgroundJayal, P., & Bhuvaneswari, G. (2021) · International Transactions on Electrical Energy Systems · doi:10.1002/2050-7038.12789 · Cited by 15
Maximum Power per Ampere Modulation for Cascaded H-Bridge Converters
Spina, I., Rogers, D. J., Brando, G., Chatzinikolaou, E., & Siwakoti, Y. P. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3114005 · Cited by 13
“This naturally leads to a pulsed current flowing in the dc sources of each module [14].”
BackgroundKarunathilake, D., Vilathgamuwa, D. M., Mishra, Y., Corry, P., Farrell, T., & Choi, S. S. (2023) · Batteries · doi:10.3390/batteries9040217 · Cited by 13
Evaluation of Medium Voltage SiC Flying Capacitor Converter and Modular Multilevel Converter
Jiao, D., Huang, Q., & Huang, A. Q. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235758 · Cited by 13
“This paper uses a similar power loss calculation method as described in [12] for calculation of FCC and MMC semiconductor device losses.”
MethodOperation of an Externally Excited Synchronous Machine with a Hybrid Multilevel Inverter
Terbrack, C., Stöttner, J., & Endisch, C. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215895 · Cited by 12
“Approaches can be found for example in [6,7,13,15-17] where new MLI topologies are proposed and compared to conventional two-level inverters.”
BackgroundComparative Analysis of Modulation Techniques for Modular Multilevel Converters in Traction Drives
Simone, D. D., Piegari, L., & D'Areo, S. (2018) · International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) · doi:10.1109/speedam.2018.8445212 · Cited by 12
“The feasibility of this idea has been proven by means of a small prototype [7], while in [8] the balancing techniques have been optimized with attention to the efficiency of the converter.”
Self-citationModular Multilevel Converter for Multifunctional Battery Management System of Electric Vehicle
Sangiri, J. B., Raiesh, V., Chattopadhyay, S. K., & Chakraborty, C. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591704 · Cited by 12
“Arm and cell balancing controllers have been implemented [14] for regulating the dc link voltages of the submodules.”
BackgroundStöttner, J., Hanzl, C., Terbrack, C., & Endisch, C. (2025) · Energy Reports · doi:10.1016/j.egyr.2025.03.001 · Cited by 12
Pizzo, A. D., Coppola, M., & Spina, I. (2018) · IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) · doi:10.1109/esars-itec.2018.8607571 · Cited by 10
“Compared with two-level VSCs, they have several advantages: reduced dv/dt stresses on the power devices (with related reduction of electromagnetic compatibility problems), low distortion in the output voltage and in the input current waveforms, small common-mode voltage (completely absent if a suitable modulation tech…”
MethodInfluentialDevice-Level Parallel-in-Time Simulation of MMC-Based Energy System for Electric Vehicles
Lyu, C., Lin, N., & Dinavahi, V. (2021) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2021.3081534 · Cited by 11
“Due to the highly modular structure, low switching power consumption, solid harmonic suppression, and inherently bidirectional characteristic, the modular multilevel converter (MMC) is a potential candidate for IM-based EVs [2], [5]–[7].”
BackgroundMalekpour, H., Rashidi, A., Nejad, S. M. S., & Lee, D. (2025) · IEEE Access · doi:10.1109/access.2025.3587508 · Cited by 9
A comprehensive review on single DC source multilevel inverters for renewable energy applications
Jiang, J., Liang, Z., & Wang, H. (2023) · Electrical Engineering · doi:10.1007/s00202-023-01921-4 · Cited by 12
A Reconfigurable Cascaded Multilevel Converter for EV Powertrain
Tresca, G., Formentini, A., Riccio, J., Anglani, N., & Zanchetta, P. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3337763 · Cited by 10
Zhang, L., Zhao, H., & Liu, C. (2024) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2024.109526 · Cited by 9
Reconfigurable Cascaded Multilevel Converter: A New Topology For EV Powertrain
Tresca, G., Leuzzi, R., Formentini, A., Rovere, L., Anglani, N., & Zanchetta, P. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9595741 · Cited by 9
“[5] a Modular Multilevel Converter (MMC) is proposed emphasizing the benefits for battery balancing and SOC”
BackgroundPatra, A. K., & Rath, D. (2022) · Journal of The Institution of Engineers (India) Series B · doi:10.1007/s40031-022-00739-1 · Cited by 8
“The photovoltaic system comprises of RSMLI, photovoltaic cell, THI-SPWM-based triggering mechanisms, HGAPSO tuned 3DOF-FOTIDCF and boost converter.”
MethodInfluentialKrishnachaitanya, D., & Chitra, A. (2023) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.3653 · Cited by 9
Burgos-Mellado, C., Donoso, F., & Dragičević, T. (2022) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec53557.2022.9813912 · Cited by 8
Electrochemical Cell Loss Minimization in Modular Multilevel Converters Based on Half-Bridge Modules
Brando, G., Chatzinikolaou, E., Rogers, D., & Spina, I. (2021) · Energies · doi:10.3390/en14051359 · Cited by 8
“Cell losses may be added to the analysis of [11], by applying Equations (21), (24) and (27), resulting in the loss breakdown given in Figure 7b.”
BackgroundMethodInfluentialA Low-Loss Dynamically Reconfigurable Battery Topology for DC Microgrid Applications
Zhu, J., Liu, Z., Yang, X., Wu, L., Liu, F., He, S., & Wei, T. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3491802 · Cited by 7
Charging infrastructure placement for electric vehicles: An optimization prospective
Ejaz, W., Naeem, M., Ramzan, M. R., Iqbal, F., & Anpalagan, A. (2017) · International Telecommunication Networks and Applications Conference (ITNAC) · doi:10.1109/atnac.2017.8215427 · Cited by 7
“discussed in literature such as battery EV (BEV) [6], [7], zero emission EV (ZEV) [8], fully EV (FEV) [9], etc.”
BackgroundEs-saadi, M., Chaikhy, H., & Khafallah, M. (2022) · Applied System Innovation · doi:10.3390/asi5060106 · Cited by 7
Modular multilevel converters: A study on topology, control and applications
Kurtoğlu, M., Eroğlu, F., Arslan, A. O., & Vural, A. M. (2018) · doi:10.1109/iceee2.2018.8391305 · Cited by 8
“Other applications have been presented in the last three years in the literature such as motor drives [63]–[65], STATCOM [66], [67], PET [68], [69], renewable energy integration containing PV system and wind energy [70]– [74], BES systems [75], [76], active power filter [77] and electric ship implementation [78].”
Shchur, I. Z., & Turkovskyi, V. (2020) · 2020 IEEE Problems of Automated Electrodrive. Theory and Practice (PAEP) · doi:10.1109/paep49887.2020.9240871 · Cited by 7
“MCC can operate mainly at fundamental frequencies that improves energy efficiency of drive systems [2].”
BackgroundGirona‐Badia, J., Gomis‐Bellmunt, O., Lledó-Ponsati, T., Capó-Lliteras, M., Collados‐Rodríguez, C., Cutululis, N. A., Saborío‐Romano, O., Montesinos‐Miracle, D., Pagès, M., Heredero-Peris, D., et al. (2022) · Energies · doi:10.3390/en15051819 · Cited by 7
A Comprehensive Review of Equalization Techniques for Reconfigured Second-Life Battery Systems
Qi, J., Xu, Y., Chen, S., Shen, J., Yang, R., & Xu, H. (2025) · Batteries · doi:10.3390/batteries11090327 · Cited by 6
Yan, Y., Sun, Y., Fan, Z., Teixeira, C. A., & Hu, M. (2025) · Protection and Control of Modern Power Systems · doi:10.23919/pcmp.2023.000306 · Cited by 6
Dual Motor Drive System Based on Distributed Battery Pack Modular Multilevel Converter
Barresi, M., Simone, D. D., Piegari, L., Baquero, R. S., & Toscani, N. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3573592 · Cited by 6
Self-citationPower Imbalance Analysis of Modular Multilevel Converter With Distributed Energy Systems
Salvadores, T., Pereda, J. E., & Rojas, F. (2024) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2024.3361167 · Cited by 6
Heat transfer in phase change materials for integrated batteries and power electronics systems
Zhang, L., Zhao, H., Liang, S., & Liu, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120997 · Cited by 6
Terbrack, C., Speer, S., & Endisch, C. (2023) · Electronics · doi:10.3390/electronics12143130 · Cited by 6
Zaid, M. M., & Ro, J. (2020) · IET Power Electronics · doi:10.1049/iet-pel.2019.1389 · Cited by 6
Modeling Control and Robustness Assessment of Multilevel Flying-Capacitor Converters
Zanasi, R., & Tebaldi, D. (2021) · Energies · doi:10.3390/en14071903 · Cited by 6
“These types of power conversion find application in many areas, including smart grids [1,4,5], hybrid electric vehicles [7], and many others.”
BackgroundModelling of Machine Learning Controller Based Reduced Switch Multi Level Inverter
Rath, D., Patra, A. K., Kar, S. K., & Rout, B. (2021) · International Conference in Advances in Power, Signal, and Information Technology (APSIT) · doi:10.1109/apsit52773.2021.9641107 · Cited by 6
Sheng, J., Xiang, X. J., Xu, L., Yang, H., Shi, T., Li, W., & He, X. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3547716 · Cited by 5
Ammaiyappan, A. B. S., & Ramalingam, S. (2021) · Circuit World · doi:10.1108/cw-08-2020-0186 · Cited by 5
Wu, C., Liu, Y., Zhou, T., & Cao, S. (2022) · Energies · doi:10.3390/en15134526 · Cited by 5
Metadata
- Authors
- Quraan, M., Tricoli, P., D Arco, S., & Piegari, L.
- Affiliations
- University of Birmingham (GB)
- Politecnico di Milano (IT)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-03
- Volume
- 32
- Issue
- 3
- Pages
- 2041-2051
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2338604703
- Cited by
- 148
- References
- 21
- Citations by year
- 2026: 5 · 2025: 13 · 2024: 12 · 2023: 22 · 2022: 22 · 2021: 25 · 2020: 16 · 2019: 12 · 2018: 16 · 2017: 4
- FWCI
- 5.07
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Virtual Community of Pathological Anatomy (University of Castilla La Mancha) (submittedVersion, other-oa)
- University of Birmingham Research Portal (University of Birmingham) (submittedVersion, other-oa)
- Funders
- Engineering and Physical Sciences Research Council (EP/L023261/1)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Keywords
- modular multilevel converter, battery electric vehicles, traction drives, battery balancing, power loss modeling, conduction losses, switching losses, field weakening, torque-speed characteristics, prototype testing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.