Multiobjective Optimization of Medium-Frequency Transformers for Isolated Soft-Switching Converters Using a Genetic Algorithm
Open accessThe DOI matches its Crossref record; 29 of the 30 references it cites were found in a registry or an index.
Abstract
The main challenge of medium-frequency transformers is the number of design parameters, constraints and objectives, and the difficulty of handling them on a particular design. This paper presents a novel computer-aided optimal design for MF transformers using a multiobjective genetic algorithm, in particular the nondominated sorting genetic algorithm II. The proposed methodology has the aim of reaching the best MF transformer for a given power converter topology, by optimizing transformer efficiency, weight, and also, transformer leakage and magnetizing inductances at the same time. The proposed methodology and the optimal solutions are validated with the design and the development of two 10-kVA/500-V transformers considering two different topologies. Finally, some experimental measurements are presented so as to demonstrate the proposed models and the performance of built transformers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
A fast and elitist multiobjective genetic algorithm: NSGA-II
Deb, K., Pratap, A., Agarwal, S., & Meyarivan, T. (2002) · IEEE Transactions on Evolutionary Computation · doi:10.1109/4235.996017 · Cited by 50,053 · cited 10×
“For real-coded NSGA-II, this paper considers a polynomial mutation [26] and a self-adaptive recombination [27].”
MethodInfluentialVenkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H. (2003) · 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings. · doi:10.1109/cipe.2002.1196712 · Cited by 1,145 · cited 2×
“Due to the proliferation of power electronics based systems, and being aware of the lack of expressions for nonsinusoidal magnetization cases, the Improved Generalized Steinmetz Equation [30] is applied within this design methodology to obtain the magnetic specific core loss expression Ps Ps = 1 T ∫ T 0 ki ∣ ∣ ∣ ∣ dB(…”
MethodSteinmetz, C. P. (1892) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1892.5570437 · Cited by 407 · cited 1×
“Regarding the transformer core losses, they can be calculated with the Steinmetz equation [29].”
MethodPower Electronic Traction Transformer-Low Voltage Prototype
Dujic, D., Zhao, C., Mester, A., Steinke, J. K., Weiss, M., Lewdeni-Schmid, S., Chaudhuri, T., & Stefanutti, P. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2248756 · Cited by 293
Optimized transformer design: inclusive of high-frequency effects
Hurley, W. G., Wolfle, W. H., & Breslin, J. G. (1998) · IEEE Transactions on Power Electronics · doi:10.1109/63.704133 · Cited by 291 · cited 1×
“Afterward, Hurley presented an improved solution of the minimum loss problem, introduced by [15], including highfrequency (HF) effects [16].”
Medium frequency topology in railway applications
Steiner, M., & Reinold, H. (2007) · 2007 European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417570 · Cited by 249
van Hoek, H., Neubert, M., & De Doncker, R. W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2251905 · Cited by 179 · cited 1×
“Thus, there is an obvious interest in developing this type of systems in various applications where space and weight restrictions are critical, like railway traction [1]–[8], offshore wind power [9], or electrical vehicles [10]–[12].”
BackgroundAn actively cooled high power, high frequency transformer with high insulation capability
Heinemann, L. (2003) · APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335) · doi:10.1109/apec.2002.989270 · Cited by 135
Application of geometric programming to transformer design
Jabr, R. A. (2005) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2005.856921 · Cited by 132 · cited 1×
“More recent researches considered the use of advanced optimization algorithms in order to deal with the optimal design of transformers, as genetic algorithms [18], geometric programming [19], evolutionary algorithms [20] or particle swarm optimization [21].”
MethodA New Architecture for Offshore Wind Farms
Prasai, A., Yim, J.-S., Divan, D. M., Bendre, A. R., & Sul, S. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.921194 · Cited by 122 · cited 1×
“Thus, there is an obvious interest in developing this type of systems in various applications where space and weight restrictions are critical, like railway traction [1]–[8], offshore wind power [9], or electrical vehicles [10]–[12].”
Background
Research works printed but not linked: 2
- orenchak, 2004, Estimating temperature rise of transformers, Power Electron Technol, 30, 14
- engel, 0, 15 kV–16.7 Hz energy supply system with medium frequency transformer and 6.5 kV IGBTs in resonant operation, Proc Eur Conf Power Electron Appl
Cited by
Artificial Neural Network (ANN) Based Fast and Accurate Inductor Modeling and Design
Guillod, T., Papamanolis, P., & W. Kolar, J. (2020) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2020.3012777 · Cited by 264
“Stochastic optimization still requires the evaluation of tens of thousands design possibilities, which still takes several minutes with a semi-numerical model and some hours or days with a numerical model [12], [31].”
BackgroundZhang, Z., Liu, C., Wang, M., Si, Y., Liu, Y., & Lei, Q. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2980313 · Cited by 137
Zhao, B., Zhang, X., & Huang, J. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2896235 · Cited by 118
“Complimentary to PSO algorithm, GA algorithm can overcome the premature problem and be easily integrated with other algorithms [32]–[34].”
MethodDesign and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters
Guo, Z., Yu, R., Xu, W., Feng, X., & Huang, A. Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3059879 · Cited by 115
“Previous research [11], [12], [15], [16] investigated the optimal design methodologies for MFTs.”
BackgroundLi, Z., Hsieh, E., Li, Q., & Lee, F. C. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3279030 · Cited by 111
“Some articles have proposed optimization methods that utilize numerical optimization techniques to sweep through different design parameters and obtain the optimal tradeoff for each design objective [20], [21], [32], [33], [41], [42].”
MethodChen, B., Liang, X., & Wan, N. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2987944 · Cited by 102
Power electronic transformers: A review
Battal, F., Balcı, S., & Sefa, İ. (2020) · Measurement · doi:10.1016/j.measurement.2020.108848 · Cited by 79
Zou, S., Lu, J., Mallik, A., & Khaligh, A. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2804328 · Cited by 74
“in [17], which not only meets all the design requirements, but”
BackgroundShen, X., Zuo, Y., Kong, J., & Martinez, W. H. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3381431 · Cited by 58
Fouineau, A., Raulet, M., Lefebvre, B., Burais, N., & Sixdenier, F. (2018) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2018.2858743 · Cited by 58
“The design of the medium frequency transformer must take into account all these specifications, which involves a multi-objective optimization process [5], [6].”
BackgroundRasool, H., Verbrugge, B., Zhaksylyk, A., Tran, M. T., Baghdadi, M. E., Geury, T., & Hegazy, O. (2021) · IEEE Access · doi:10.1109/access.2021.3086392 · Cited by 50
Advanced Ferromagnetic Materials in Power Electronic Converters: A State of the Art
Rodriguez-Sotelo, D., Rodríguez, M., Soriano-Sánchez, A. G., Espinosa-Calderon, A., & Pérez-Pinal, F. J. (2020) · IEEE Access · doi:10.1109/access.2020.2982161 · Cited by 49
“6 [99], [129], [134]–[137].”
Medium-Frequency Transformer Scaling Laws: Derivation, Verif ication, and Critical Analysis
Guillod, T. (2020) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2020.00003 · Cited by 48
“, particle swarm and genetic) should be selected [27], [47].”
BackgroundMethodFast Battery Cell Voltage Equalizer Based on the Bidirectional Flyback Converter
Milas, N. T., & Tatakis, E. C. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3186520 · Cited by 45
Optimized Multiport DC/DC Converter for Vehicle Drivetrains: Topology and Design Optimization
Tran, D.-D., Chakraborty, S., Lan, Y., Mierlo, J. V., & Hegazy, O. (2018) · Applied Sciences · doi:10.3390/app8081351 · Cited by 36
“The multi-objective optimization of transformer design was solved by the Nondominated Sorted Genetic Algorithm (NSGA-II) [12]; however, the final design selected from Paretosolutions was not explained clearly.”
MethodInfluentialWang, C., Zsurzsan, T., & Zhang, Z. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3102398 · Cited by 34
“, active damping design [9], multiobjective optimization of transformer [10], [11], maximum power point tracking control for photovoltaic systems [12], system reliability design [13], etc.”
BackgroundSomkun, S., Sato, T., Chunkag, V., Pannawan, A., Nunocha, P., & Suriwong, T. (2021) · Energies · doi:10.3390/en14092407 · Cited by 33
“The authors of [19] calculated that an E100 3C90 ferrite Figure 18.”
BackgroundMethodInfluentialEvaluation of Transformer Leakage Inductance Using Magnetic Image Method
Sharma, A., & Kimball, J. W. (2021) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2021.3111479 · Cited by 33
Bui, V., Chang, F., Su, W., Wang, M., Murphey, Y. L., da Silva, F. L., Huang, C., Xue, L. L., & Glatt, R. (2022) · IEEE Access · doi:10.1109/access.2022.3194267 · Cited by 32
“A novel optimal design for medium-frequency transformers using a multi-objective genetic algorithm has been presented in [12] to determine the best transformer for a given power converter topology.”
BackgroundMethodLitz-Wire Winding Loss Calculation Method for Optimal Design of High-Frequency Transformers
Chen, T., Zhao, Z., Shen, Z., Jia, H., Ji, J., & Wang, H. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3361924 · Cited by 28
Ruiz-Robles, D., Venegas‐Rebollar, V., Anaya-Ruiz, A., Moreno‐Goytia, E. L., & Rodriguez‐Rodrıguez, J. R. (2018) · Energies · doi:10.3390/en11082081 · Cited by 28
“In order proposals, [14,20,21] the flow densities are 0.”
BackgroundMethodPareto-Optimal Design of Litz-Wire Gapped-Core High-Frequency Transformer for LLC Converters
Ahmed, D., Wang, L., Dai, Z., & Wu, M. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3111581 · Cited by 26
“So, for implementing the direct-selection method [3], KG (10) and rs (14) models have been replaced by adding nSZ and ds as optimization-variables in addition to the existing optimization-”
BackgroundMethodResultInfluentialGeometrical Optimization of Medium-Frequency Air-Core Transformers for DCX Applications
Guillod, T., Czyż, P., & Kolar, J. W. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3140197 · Cited by 21
A Universal Block of Series-Connected SiC MOSFETs Using Current-Source Gate Driver
Liu, C., Zhang, Z., Liu, Y., Si, Y., Wang, M., & Lei, Q. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3068904 · Cited by 21
Yin, H., Lai, J., Ren, S., Su, J., Yu, X., & Ma, K. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3187854 · Cited by 21
Yu, X., Su, J., Lai, J., & Guo, S. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2953101 · Cited by 21
AutoTG: Reinforcement Learning-Based Symbolic Optimization for AI-Assisted Power Converter Design
da Silva, F. L., Glatt, R., Su, W., Bui, V., Chang, F., Chaturvedi, S., Wang, M., Murphey, Y. L., Huang, C., Xue, L. L., et al. (2023) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2023.3303836 · Cited by 20
Wang, Y., Du, T., Liu, T., & Zhang, L. (2019) · IEEE Access · doi:10.1109/access.2019.2932883 · Cited by 18
“are not good enough especially the multi-objective optimization in dynamic environment [12], [13].”
BackgroundYuan, S., Zhou, L., Cai, F., Wang, D., Wang, L., & Huang, L. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3224503 · Cited by 17
“Adopting an artificial intelligence optimization algorithm is an effective way to solve the complex problems of transformer optimal design, such as the electromagnetic optimization design of transformer [13], [14], [15].”
MethodAhmed, D., & Wang, L. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2982097 · Cited by 17
“Furthermore, in comparison to NSGA-II-based optimization [8], the proposed method provided an optimal design with better results without any iterations in contrast with 40,000 iterations in [8], proving as a highly efficient analytical optimization method.”
BackgroundMethodResultInfluentialCalculation of Leakage Inductance in Toroidal Core Transformer With Non-Interleaved Windings
Amirbande, M., & Vahedi, A. (2020) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2020.3035901 · Cited by 17
“So, the estimation of them is necessary for the optimization and design procedures [5], [6].”
Zhang, X., Xiao, F., Wang, R., Kang, W., & Yang, B. (2022) · Energies · doi:10.3390/en15041361 · Cited by 16
Study of a High-Power Medium Frequency Transformer Using Amorphous Magnetic Material
Zhang, S., Chen, D., & Bai, B. (2022) · Symmetry · doi:10.3390/sym14102129 · Cited by 16
“Therefore, the mathematical model used in the design process should be as accurate as possible, considering the electrical, magnetic, and thermal aspects of the MFT [13].”
MethodAhmed, D., & Wang, L. (2020) · IEEE Access · doi:10.1109/access.2020.2965653 · Cited by 15
“In this sub-section, the accuracy and the optimality of the proposed method are verified through comparison with the benchmark method [11], the brute-force iterative optimization, the genetic algorithm (GA)-based optimization [7], as well as, the FEM simulations.”
BackgroundMethodResultInfluentialTran, D.-D., Chakraborty, S., Lan, Y., Baghdadi, M. E., & Hegazy, O. (2020) · Energies · doi:10.3390/en13195167 · Cited by 15
“, minimization of sizing, cost, and losses) of various applications such as inductor [14], medium-frequency transformer [18], solid-state transformer [16], AC/DC converter [8], DC/AC converter [24], res nant tank of dual-active bridge [15], power correction factor [13,17], and heat sink [24].”
BackgroundVf ‐constrained ηρ ‐pareto optimisation of medium frequency transformers in ISOP‐DAB converters
Beiranvand, H., Rokrok, E., & Liserre, M. (2020) · IET Power Electronics · doi:10.1049/iet-pel.2019.1159 · Cited by 14
A Medium Frequency Transformer Design Tool with Methodologies Adapted to Various Structures
Fouineau, A., Guillet, M., Lefebvre, B., Raulet, M., & Sixdenier, F. (2020) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever48776.2020.9243104 · Cited by 14
“Reference work [5] [6] [7] [8] [9] [10] [11] This work Leakage Ind.”
Novel Transformer with Variable Leakage and Magnetizing Inductances
Sharma, A., & Kimball, J. W. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.2172/1991834 · Cited by 14
Vu, H.-N., Abdel-Monem, M., Baghdadi, M. E., Mierlo, J. V., & Hegazy, O. (2019) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc46532.2019.8952196 · Cited by 13
“The main principle of NSGA-II is to alter the optimization variables with crossover and mutation operators and select the population of the next generation basing on the Pareto front dominance.”
MethodInfluentialChen, C. (2022) · IEEE Access · doi:10.1109/access.2022.3144836 · Cited by 12
“Multiple objectives Turn ratio, capacities and inductances Active set algorithm N/A Phase-shift LLC series resonant converter [24] Components of mediumfrequency transformers Genetic algorithm N/A LLC resonant converter [25] Number of switches, drivers, and dc sources in each submultilevel Particle swarm optimization N…”
Analysis of a New Single-Stage AC/AC Converter for Solid-State Transformer
Khan, W., Dar, J. A., Parihar, K. S., & Pathak, M. K. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3343312 · Cited by 12
Design Automation of Power Electronic Converters a Grid Elitist Multiobjective Genetic Algorithm
Delaforge, T., & Mariéthoz, S. (2020) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec39645.2020.9124359 · Cited by 12
Peng, H., & Mohammadinia, S. (2020) · Engineering Applications of Computational Fluid Mechanics · doi:10.1080/19942060.2020.1784797 · Cited by 12
Magnetic-Coupled and Low-Cost Gate Driver for Series-Connected SiC MOSFETs
Ding, S., Wang, P., Wang, W., & Xu, D. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3304114 · Cited by 11
“The primary winding turn number Np can be calculated with [29]”
BackgroundZhou, B., Zhang, M., Luo, H., Qiu, Y., Chen, S., Zang, T., Zhou, Y., & Zhou, X. (2023) · IET Power Electronics · doi:10.1049/pel2.12525 · Cited by 10
Park, H.-C., Yang, J.-U., Jang, J.-S., & Kim, R.-Y. (2023) · IEEE Access · doi:10.1109/access.2023.3346322 · Cited by 10
Multi-objective Pareto and GAs nonlinear optimization approach for flyback transformer
Barg, S., & Bertilsson, K. (2019) · Electrical Engineering · doi:10.1007/s00202-019-00836-3 · Cited by 10
Guo, Y., Lu, C., Hua, L., & Zhang, X. (2020) · Energies · doi:10.3390/en13143654 · Cited by 9
“When resonance control is adopted, the leakage inductance of the HPMFT needs to match with the resonance capacitance and frequency, so that the circuit can achieve the ideal resonance state [16,17].”
BackgroundWang, C., Xiao, Y., Zsurzsan, T., & Zhang, Z. (2021) · IEEE ECCE Asia Downunder · doi:10.1109/ecce-asia49820.2021.9479386 · Cited by 9
“damping design [8], multi-objective optimization of transformer [9][10], maximum power point tracking (MPPT) control for photovoltaic systems [11], system reliability design”
BackgroundFerrites and Nanocrystalline Alloys Applied to DC–DC Converters for Renewable Energies
Ruiz-Robles, D., Ortíz-Marín, J., Moreno‐Goytia, E. L., Fuerte, C., Venegas‐Rebollar, V., Vargas, A., & Vergara–Hernández, H. J. (2022) · Applied Sciences · doi:10.3390/app12020709 · Cited by 9
Ahmed, D., & Wang, L. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2019.0316 · Cited by 8
Dang, Y., Zhu, L., Liu, F., Zhang, F., Liu, Z., & Ji, S. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3521456 · Cited by 7
Optimization of Magnetic Couplers in Wireless Charging Systems Using the Surrogate Model
Li, Z., Li, X., Yuan, D., Zhang, J., & Liu, Y. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3544868 · Cited by 7
Parallel Frameworks for Robust Optimization of Medium-Frequency Transformers
Booth, K., Subramanyan, H., Líu, J., & Lukic, S. M. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3042527 · Cited by 7
“If there is a specific range for the leakage inductance, it can always be added as constraints to the method [14]”
BackgroundMethodSaha, J., Gorla, N. B. Y., Subramaniam, A., & Panda, S. K. (2021) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon48115.2021.9589779 · Cited by 7
A comprehensive design approach for a three‐winding planar transformer
Zou, S., Singhabahu, C., Chen, J., & Khaligh, A. (2022) · IET Power Electronics · doi:10.1049/pel2.12261 · Cited by 7
The Regulation Characteristics of Bridge Modular Switched-Capacitor Ac-Ac Converter
He, L., Zeng, T., & Zhang, J. (2019) · IEEE Access · doi:10.1109/access.2019.2937567 · Cited by 7
Ruiz-Robles, D., Figueroa-Barrera, C., Moreno‐Goytia, E. L., & Venegas‐Rebollar, V. (2020) · Electronics · doi:10.3390/electronics9030453 · Cited by 6
Boi, M., Mastromauro, R. A., Floris, A., & Damiano, A. (2023) · Energies · doi:10.3390/en16052169 · Cited by 6
“In particular, referring to the methodologies reported in technical literature, the design of a medium-frequency transformer suitable for DAB application can be performed considering the commercially available e-core and Litz-wire [37,38].”
MethodHybrid model to evaluate the frequency-dependent leakage inductance of partially-filled transformers
Sharma, A., & Kimball, J. W. (2023) · Power Electronic Devices and Components · doi:10.1016/j.pedc.2023.100038 · Cited by 6
Deep Reinforcement Learning-Based Optimal Parameter Design of Power Converters
Bui, V., Chang, F., Su, W., Wang, M., Murphey, Y. L., da Silva, F. L., Huang, C., Xue, L. L., & Glatt, R. (2023) · 2012 International Conference on Computing, Networking and Communications (ICNC) · doi:10.1109/icnc57223.2023.10074355 · Cited by 6
“…have been developed and widely applied in optimal parameter design of power converters, including single-or multiple-objective problems [4], simulated annealing algorithm [5], bee colony optimization algorithm [6], genetic algorithm, and particle swarm optimization algorithm are proposed in [7].”
MethodOptimal design of medium-frequency transformers for solid-state transformer applications
Beiranvand, H., Rokrok, E., Rezaeealam, B., & Kumar, A. (2017) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc.2017.7910407 · Cited by 6
Volpini, A., Tresca, G., Campailla, S., Dappiano, A., & Zanchetta, P. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861708 · Cited by 5
Liu, Z., Zhu, L., Dang, Y., & Ji, S. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3610516 · Cited by 5
Guo, Z., Huang, Z., Chen, Z., & Sun, X. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3647695 · Cited by 5
Development of a High Power, Medium Frequency Transformer for Medium Voltage Applications
Shafei, A. E., Özdemir, Ş., Altın, N., & Nasiri, A. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362616 · Cited by 5
Modeling and Optimization of Axial Winding Segmented Coreless Transformers
Lai, L. F., Zhang, B., & Lin, J. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3497973 · Cited by 5
Thermal Analysis of DAB Converter Core used in Hybrid Aircraft Propulsion System
Ciccarelli, F., Noia, L. P. D., Hamasaki, S., & Rizzo, R. (2019) · International Conference on Clean Electrical Power · doi:10.1109/iccep.2019.8890151 · Cited by 5
“losses analysis and temperature increase) has gained considerable attention in the literature [1-4].”
BackgroundSang, X., Gao, S., Wang, Y., & Xu, D. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3336288 · Cited by 5
An overview of power loss calculation methods for high-frequency litz wires
Chen, T., Zhao, Z., Ming, L., Shi, Z., Ge, Y., & Wang, H. (2024) · International Journal of Applied Electromagnetics and Mechanics · doi:10.3233/jae-230171 · Cited by 5
“Compared with traditional copper conductors, the litz wires experience reduced eddy-current losses, making them more suitable for HF applications under certain conditions [18–21].”
Bakar, M. A., Alam, M. F., & Bertilsson, K. (2020) · IEEE Access · doi:10.1109/access.2020.2981342 · Cited by 5
“In cases where the strand diameter d ≤ Sd , the simplified one-dimensional approach derived in the literature [35], [38], [39] and used in [22], [37] have been adopted in this work.”
MethodThermal behavior of grain-oriented electrical steel wound core solid-state transformer
Ichou, H., Roger, D., & Rossi, M. (2022) · COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering · doi:10.1108/compel-06-2021-0223 · Cited by 5
Yang, Z. G., Tahir, M., Hu, S., Huang, Q., & Zhu, H. (2022) · Energies · doi:10.3390/en15186801 · Cited by 5
Improved analytical modeling of high frequency conductive losses in isolated rectangular conductor
Wang, X., Wang, L., Mao, L., & Zhang, Y. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096572 · Cited by 5
Leng, Y., Wang, Y., & Hong, X. (2025) · Advanced Engineering Informatics · doi:10.1016/j.aei.2025.103493 · Cited by 4
Huang, P., Dian, R., Wang, P., Wang, D., Liu, Z., & Wang, Q. (2021) · Energies · doi:10.3390/en14113285 · Cited by 4
“[10] presents a novel computer-aided optimal design for MFT using the non-dominated sorting genetic algorithm II.”
MethodWang, J., Yao, Z., & Yang, R. (2023) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec58067.2023.10165893 · Cited by 4
Yang, W., Xu, Y., Chen, Q., Hu, J., Cui, B., Yang, Z., Zhao, B., & Sun, Q. (2023) · IEEE Sustainable Power and Energy Conference (iSPEC) · doi:10.1109/ispec58282.2023.10402808 · Cited by 4
“To meet the demand for high density and high reliability of power electronic transformers in application scenarios such as offshore wind power, photovoltaic convergence and railroad traction, magnetic transformers are being developed in the direction of higher frequency and increased capacity [5-7].”
BackgroundGenetic Algorithm-Optimized Diode-Based Temperature Control Actuation System
Huang, Y., Zhang, D., Zhu, X., Li, A., & Wang, Y. (2025) · IEEE Access · doi:10.1109/access.2025.3553476 · Cited by 4
“Simulation results show that it can find the global optimal solution with the least number of iterations in multiple benchmark tests, proving its effectiveness and efficiency in solving linear, nonlinear and mixed integer problems [13].”
Mapa, S., & Bhuvaneswari, G. (2021) · Engineering Reports · doi:10.1002/eng2.12457 · Cited by 4
Timothe, D., Marco, P., & Michael, D. R. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362383 · Cited by 4
Accelerating Multi-Objective Optimization for Next-Generation Magnetic Devices
Li, Y., Gradinger, T. B., & Burkart, R. M. (2024) · Energy Conversion Congress and Expo Europe (ECCE Europe) · doi:10.1109/ecceeurope62508.2024.10752031 · Cited by 4
Valencia, T. E. S., Ruiz-Robles, D., Ortíz-Marín, J., Franco, J. A., Hernández-Escobedo, Q., & Moreno‐Goytia, E. L. (2024) · Technologies · doi:10.3390/technologies12120246 · Cited by 4
Meligy, A., Twizeyimana, J., Coelho-Medeiros, R., Stackler, C., Colak, I., & Bacha, S. (2024) · IEEE Design Methodologies Conference (DMC) · doi:10.1109/dmc62632.2024.10812149 · Cited by 4
Tiwari, A., Singh, V. K., & Shukla, P. K. (2018) · Communications in computer and information science · doi:10.1007/978-981-13-1813-9_26 · Cited by 4
Ahmed, D., Wang, L., & Dai, Z. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235756 · Cited by 4
“For example, current density, core size, and core air-gap are dependent on the peak flux density but some designers[2], [10] consider these as independent OVs.”
BackgroundMethodResultInfluentialMultilevel Dual Active Bridge Leakage Inductance Selection for Various DC-Link Voltage Spans
Khanzadeh, B., Thiringer, T., & Kharezy, M. (2023) · Energies · doi:10.3390/en16020859 · Cited by 4
Improving High Frequency Transformers behavior for DC-DC Converter Used in Electric Vehicles
Noia, L. P. D., Rizzo, R., Miceli, R., & Piegari, L. (2018) · International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera.2018.8567012 · Cited by 4
Goodrick, K. J., Seo, G., Mukherjee, S., Roy, J., Mallik, R., Majmunović, B., Dutta, S., Maksimović, D., & Johnson, B. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9236092 · Cited by 4
The dual active bridge converter design with artificial intelligence
Lin, F. (2022) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/163850 · Cited by 4
Zhao, Y., Li, Y., Hu, S., Wu, F., Cao, Y., Li, R., & Cai, J. (2025) · Electric Power Systems Research · doi:10.1016/j.epsr.2025.112102 · Cited by 3
Ding, H., Zhao, W., Sui, Z., Han, Y., Yang, F., & Zhao, H. (2025) · IET Electric Power Applications · doi:10.1049/elp2.70115 · Cited by 3
Bharathi, U., Vharshiny, K., Verma, S., Ajay, A., Sreekeessoon, B., & Naidu, R. C. (2022) · International Conference on Advances in Electrical, Computing, Communication and Sustainable Technologies (ICAECT) · doi:10.1109/icaect54875.2022.9807885 · Cited by 3
“…operating manufacturing plants and was proved to be successful algorithm because it combined several methods together to provide optimal robustness, high speed of execution in the manufacturing plants, and this also had the ability to search the large solution space effectively[24][25][26].”
MethodAutomated Design and Optimization of Planar Transformers for High-Frequency Applications
Rasmann, R., Golev, V., Schümann, U., & Schnack, J. (2023) · IEEE Design Methodologies Conference (DMC) · doi:10.1109/dmc58182.2023.10412480 · Cited by 3
“To solve multi-objective optimization problems, metaheuristic algorithms such as Evolutionary Algorithms (EA) or Particle Swarm Optimization (PSO) can be applied since they are able to handle non-linear, non-differentiable problems [10], [16].”
MethodShen, X., Cobaleda, D. B., Wouters, H., Tian, F., Pervaiz, H., & Martinez, W. H. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861454 · Cited by 3
Wang, Y., Ma, G., Chen, Y., Wu, X., & Zheng, M. (2019) · IEEJ Transactions on Electrical and Electronic Engineering · doi:10.1002/tee.23029 · Cited by 3
Fast and Accurate Electric Field Model for Optimizing the Insulation Design of Magnetic Devices
Korthauer, B., & Biela, J. (2021) · IEEE Design Methodologies Conference (DMC) · doi:10.1109/dmc51747.2021.9529943 · Cited by 3
Form-Factor-Constrained, High Power Density, Extreme Efficiency and Modular Power Converters
Wang, Q. (2018) · VTechWorks (Virginia Tech) · Cited by 3
Modelling of magnetic devices for high frequency power converters
Arruti, A. (2024) · eRepository Mondragon University (Mondragon University) · doi:10.48764/0h70-6y86 · Cited by 3
Dang, Y., Zhu, L., Liu, Z., & Ji, S. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3668908 · Cited by 2
Metadata
- Authors
- Garcia-Bediaga, A., Villar, I., Rujas, A., Mir, L., & Rufer, A.
- Affiliations
- Ikerlan (ES)
- École Polytechnique Fédérale de Lausanne (CH)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-04
- Volume
- 32
- Issue
- 4
- Pages
- 2995-3006
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2519453876
- Cited by
- 126
- References
- 30
- Citations by year
- 2026: 7 · 2025: 10 · 2024: 15 · 2023: 17 · 2022: 15 · 2021: 14 · 2020: 24 · 2019: 12 · 2018: 10 · 2017: 2
- FWCI
- 3.69
- Type
- journal article
- Language
- en
- Open access
- green
- infoscience.epfl.ch
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Computer Science › Computational Theory and Mathematics › Advanced Multi-Objective Optimization Algorithms
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- medium frequency transformer, soft-switching converters, multi-objective optimization, NSGA-II, transformer design optimization, transformer efficiency, leakage inductance, magnetizing inductance, computer-aided design
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.