In-Service Diagnostics for Wire-Bond Lift-off and Solder Fatigue of Power Semiconductor Packages
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Wire-bond lift-off and Solder fatigue are degradation mechanisms that dominate the lifetime of power semiconductor packages. Although their lifetime is commonly estimated at the design stage, based on mission profiles and physics-of-failure models, there are many uncertainties associated with such lifetime estimates, emerging, e.g., from model calibration errors, manufacturing tolerances, etc. These uncertainties, combined with the diverse working environments of power semiconductor packages result in inaccurate lifetime estimates. This paper presents an approach for estimating the extent of degradation in power semiconductor packages based on online monitoring of key parameters of the semiconductor, namely, the thermal resistance Rthjaand the electrical resistance RCE. Using these two parameters, solder fatigue and wire-bond lift-off can be detected during normal converter operation. In order to estimate these two parameters, two techniques are introduced: a residual obtained from a Kalman filter, which estimates the change in the thermal resistance Rthja, and a recursive least squares algorithm, which is used to estimate the electrical resistance. Both methods are implemented online and validated experimentally.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278
Cited by
An Overview of Artificial Intelligence Applications for Power Electronics
Zhao, S., Blaabjerg, F., & Wang, H. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3024914 · Cited by 947
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Methodology for Active Thermal Cycle Reduction of Power Electronic Modules
van der Broeck, C. H., Ruppert, L. A., Lorenz, R. D., & De Doncker, R. W. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2882184 · Cited by 85
Metadata
- Authors
- Eleffendi, M. A., & Johnson, C. M.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-09
- Volume
- 32
- Issue
- 9
- Pages
- 7187-7198
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2582421809
- Cited by
- 108
- References
- 1
- FWCI
- 4.81
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.