CoChat

A Physical RC Network Model for Electrothermal Analysis of a Multichip SiC Power Module

Open access

The DOI matches its Crossref record; 35 of the 38 references it cites were found in a registry or an index.

Abstract

This paper is concerned with the thermal models which can physically reflect the heat-flow paths in a lightweight three-phase half-bridge two-level SiC power module with six MOSFETs and can be used for coupled electrothermal simulation. The finite-element (FE) model was first evaluated and calibrated to provide the raw data for establishing the physical resistor-capacitor (RC) network model. It was experimentally verified that the cooling condition of the module mounted on a water cooler can be satisfactorily described by assuming the water cooler as a heat exchange boundary in the FE model. The compact RC network consisting of 115 R and C parameters to predict the transient junction temperatures of the six MOSFETS was constructed, where cross-heating effects between the MOSFETs are represented with lateral thermal resistors. A three-step curve fitting method was especially developed to overcome the challenge for extracting the R and C values of the RC network from the selected FE simulation results. The established compact RC network model can physically be correlated with the structure and heat-flow paths in the power module, and was evaluated using the FE simulation results from the power module under realistic switching conditions. It was also integrated into the LTspice model to perform the coupled electrothermal simulation to predict the power losses and junction temperatures of the six MOSFETs under switching frequencies from 5 to 100 kHz which demonstrate the good electrothermal performance of the designed power module.

Overview

Integrity signals

Registry

Crossref · 10.1109/tpel.2017.2697959

Cites

35 of 35 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 6

  1. 2011, Datasheet CPMF-1200-S080B SiC MOSFET N-Channel Enhancement Mode Bare Die Cree Inc
  2. zahn, 0, Comprehensive solder fatigue and thermal characterization of a silicon based multichip module package utilizing finite element analysis, Proc 9th Int ANSYS Conf Exhib, 1
  3. 2006, AP16097 XC164 Different PWM Waveforms Generation for 3-Phase AC Induction Motor With XC164CS Application Note V1 0 Infineon Technologies
  4. 2008, CPS AlSiC Composites C T Corporation
  5. sofia, 1995, Fundamentals of thermal resistance measurement, Analogic Tech, 1
  6. bryant, 0, Validation of a fast loss and temperature simulation method for power converters, Proc 2010 IEEE 6th Int Conf on Integr Power Electron Syst, 27, 1

Cited by

See all 115

Metadata

Authors
Li, J., Castellazzi, A., Eleffendi, M. A., Gurpinar, E., Johnson, C. M., & Mills, L.
Affiliations
  • University of Nottingham (GB)
  • Semelab (United Kingdom) (GB)
Venue
IEEE Transactions on Power Electronics
Published
2018-03
Volume
33
Issue
3
Pages
2494-2508
ISSN
  • 0885-8993 (ISSN-L)
  • 1941-0107
OpenAlex
W2608241360
Cited by
105
References
38
Citations by year
2026: 14 · 2025: 14 · 2024: 16 · 2023: 10 · 2022: 10 · 2021: 7 · 2020: 16 · 2019: 13 · 2018: 5
FWCI
3.87
Type
journal article
Language
en
Locations
  • IEEE Transactions on Power Electronics (publishedVersion)
  • Nottingham ePrints (University of Nottingham) (submittedVersion)
  • Repository@Nottingham (University of Nottingham) (submittedVersion, cc-by)
Funders
European Union Clean Sky JTI Program for the Robust Silicon Carbide Technology for Aerospace DC–DC Conversion Project
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
  • Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
Keywords
SiC power modules, electro-thermal simulation, RC network model, thermal modeling, water cooling, transient thermal analysis, curve fitting, power losses, switching frequency

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.