Switched-Capacitor-Based Dual-Switch High-Boost DC–DC Converter
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
A switched-capacitor-based dual-switch dc-dc converter with a high-boost voltage gain is proposed in this paper. The proposed converter can obtain a high-voltage gain with a small duty cycle, which decreases the voltage stress and the conduction loss on the power switches. This paper presents the key waveforms, the operating principles at the continuous conduction mode and the discontinuous conduction mode, and the parameter design. Moreover, a comparison between the proposed converter and other nonisolated converters has been completed. To verify the operating principle, a 200 W prototype is constructed with an input voltage of 25-50 V and an output voltage of 200 V. The simulation and experimental results are shown.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423 · cited 1×
“In the first stage, a high-step-up dc–dc converter is used to convert a low voltage into a constant dc-bus voltage [1], [2].”
MethodAxelrod, B., Berkovich, Y., & Ioinovici, A. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916403 · Cited by 1,379
Transformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808 · cited 1×
“Voltage-multiplier cells [16], a switched-inductor (SL), a switched-capacitor (SC) [17]– [21], and an active-switch network [22]–[25] have been used in other studies to provide a high boost to transformerless structures.”
ResultSurvey on non‐isolated high‐voltage step‐up dc–dc topologies based on the boost converter
Tofoli, F. L., Pereira, D. D. C., Josias de Paula, W., & Oliveira Júnior, D. D. S. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0605 · Cited by 591 · cited 1×
“In the first stage, a high-step-up dc–dc converter is used to convert a low voltage into a constant dc-bus voltage [1], [2].”
MethodImpedance specifications for stable DC distributed power systems
Feng, X., Liu, J., & Lee, F. C. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/63.988825 · Cited by 582
A DC–DC multilevel boost converter
Rosas-Caro, J. C., Ramirez, J. M., Peng, F. Z., & Valderrabano, A. (2010) · IET Power Electronics · doi:10.1049/iet-pel.2008.0253 · Cited by 522
Overview of High-Step-Up Coupled-Inductor Boost Converters
Liu, H., Hu, H., Wu, H., Xing, Y., & Batarseh, I. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2532930 · Cited by 432 · cited 1×
“The coupled-inductor-based high-step-up converters are proposed in [5]–[9] to increase the voltage gain; however, the leakage inductance of the coupled inductor is a negative impact of the coupled-inductor-based converters.”
BackgroundNonisolated High Step-Up DC–DC Converters Adopting Switched-Capacitor Cell
Wu, G., Ruan, X., & Ye, Z. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2327000 · Cited by 408 · cited 4×
“Based on the SC converter and in combination with the switching mode, the converter in [19] can increase the voltage gain with two switches.”
BackgroundMethodInfluentialCascaded DC–DC Converter Photovoltaic Systems: Power Optimization Issues
Bratcu, A. I., Munteanu, I., Bacha, S., Pïcault, D., & Raison, B. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2043041 · Cited by 376 · cited 1×
“The focus of the research studies of the noncoupledinductor converters are the voltage-lift [10], cascaded [11]–[13], and interleaved [14], [15] techniques.”
BackgroundNovel High Step-Up DC–DC Converter With Coupled-Inductor and Switched-Capacitor Techniques
Hsieh, Y.-P., Chen, J.-F., Liang, T.-J., & Yang, L.-S. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2151828 · Cited by 326 · cited 1×
“Voltage-multiplier cells [16], a switched-inductor (SL), a switched-capacitor (SC) [17]– [21], and an active-switch network [22]–[25] have been used in other studies to provide a high boost to transformerless structures.”
ResultA Switched-Capacitor-Based Active-Network Converter With High Voltage Gain
Tang, Y., Wang, T., & He, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2272639 · Cited by 317 · cited 4×
“An SC-based high-step-up voltage-gain active-network converter (ANC) with a low-voltage stress on the switches and diodes is proposed in [24].”
BackgroundMethodInfluentialHigh-Efficiency Isolated Boost DC–DC Converter for High-Power Low-Voltage Fuel-Cell Applications
Nymand, M., & Andersen, M. A. E. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2036024 · Cited by 312 · cited 1×
“For the isolated topologies [3], [4], a high-frequency transformer is used to insulate the input and the output with a two-stage dc–ac–dc power conversion.”
MethodAnalysis and Implementation of a Novel Bidirectional DC–DC Converter
Yang, L.-S., & Liang, T.-J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2134060 · Cited by 261
A High Gain Input-Parallel Output-Series DC/DC Converter With Dual Coupled Inductors
Hu, X., & Gong, C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2315613 · Cited by 217
High-Conversion-Ratio Bidirectional DC–DC Converter With Coupled Inductor
Hsieh, Y.-P., Chen, J.-F., Yang, L.-S., Wu, C.-Y., & Liu, W.-S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2244541 · Cited by 206 · cited 3×
“However, in the boost-based nonisolated dc–dc converters [5]–[25], the duty cycle is varied within a wider region of 0 to 1.”
BackgroundA Boost Converter With Capacitor Multiplier and Coupled Inductor for AC Module Applications
Chen, S.-M., Liang, T.-J., Yang, L.-S., & Chen, J.-F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2169642 · Cited by 190
A design approach for server power supplies for networking applications
Huber, L., & Jovanovic, M. M. (2002) · APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058) · doi:10.1109/apec.2000.822834 · Cited by 181 · cited 1×
“The focus of the research studies of the noncoupledinductor converters are the voltage-lift [10], cascaded [11]–[13], and interleaved [14], [15] techniques.”
BackgroundAnalysis of PWM Z-Source DC-DC Converter in CCM for Steady State
Galigekere, V. P., & Kazimierczuk, M. K. (2012) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2011.2169742 · Cited by 180 · cited 7×
“By changing the way the output is connected to the Z-source network, a commongrounded Z-source dc–dc converter (CG-ZSC) [28] can achieve a higher voltage gain in comparison with the traditional ZSC.”
BackgroundInfluentialAn interleaved boost DC-DC converter with large conversion ratio
Gules, R., Pfitscher, L. L., & Franco, L. C. (2004) · 2003 IEEE International Symposium on Industrial Electronics ( Cat. No.03TH8692) · doi:10.1109/isie.2003.1267284 · Cited by 172 · cited 4×
“In comparison to the interleaved boost dc–dc converter in [14], the proposed converter uses one less inductor with a lower voltage stress on the devices.”
BackgroundInfluentialA Common Grounded Z-Source DC–DC Converter With High Voltage Gain
Shen, H., Zhang, B., Qiu, D., & Zhou, L. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2516505 · Cited by 129 · cited 4×
“By changing the way the output is connected to the Z-source network, a commongrounded Z-source dc–dc converter (CG-ZSC) [28] can achieve a higher voltage gain in comparison with the traditional ZSC.”
BackgroundResultInfluentialJiao, Y., Luo, F. L., & Zhu, M. (2011) · IET Power Electronics · doi:10.1049/iet-pel.2010.0021 · Cited by 118 · cited 1×
“Voltage-multiplier cells [16], a switched-inductor (SL), a switched-capacitor (SC) [17]– [21], and an active-switch network [22]–[25] have been used in other studies to provide a high boost to transformerless structures.”
ResultAlcazar, Y. J. A., Oliveira, D. S., Tofoli, F. L., & Torrico-Bascope, R. P. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2213555 · Cited by 112 · cited 1×
“Voltage-multiplier cells [16], a switched-inductor (SL), a switched-capacitor (SC) [17]– [21], and an active-switch network [22]–[25] have been used in other studies to provide a high boost to transformerless structures.”
ResultQuasi-Y-Source Boost DC–DC Converter
Siwakoti, Y. P., Blaabjerg, F., & Loh, P. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2440781 · Cited by 102
Cited by
Wu, X., Wang, J., Zhang, Y., Du, J., Liu, Z., & Chen, Y. (2021) · Automotive Innovation · doi:10.1007/s42154-021-00163-z · Cited by 42
Metadata
- Authors
- Nguyen, M.-K., Duong, T.-D., & Lim, Y.-C.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2018-05
- Volume
- 33
- Issue
- 5
- Pages
- 4181-4189
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2628925613
- Cited by
- 207
- References
- 23
- FWCI
- 7.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.