The Extended Overlap Alternate Arm Converter: A Voltage-Source Converter With DC Fault Ride-Through Capability and a Compact Design
Open accessThe DOI matches its Crossref record; 45 of the 54 references it cites were found in a registry or an index.
Abstract
The alternate arm converter (AAC) was one of the first modular converter topologies to feature dc-side fault ride-through capability with only a small penalty in power efficiency. However, the simple alternation of its arm conduction periods (with an additional short overlap period) resulted in 1) substantial six-pulse ripples in the dc current waveform, 2) large dc-side filter requirements, and 3) limited operating area close to an energy sweet spot. This paper presents a new mode of operation called extended overlap (EO) based on the extension of the overlap period to 60°, which facilitates a fundamental redefinition of the working principles of the AAC. The EO-AAC has its dc current path decoupled from the ac current paths, a fact allowing 1) smooth dc current waveforms, 2) elimination of dc filters, and 3) restriction lifting on the feasible operating point. Analysis of this new mode and EO-AAC design criteria are presented and subsequently verified with tests on an experimental prototype. Finally, a comparison with other modular converters demonstrates that the EO-AAC is at least as power efficient as a hybrid modular multilevel converter (MMC) (i.e., a dc fault ride-through-capable MMC), while offering a smaller converter footprint because of a reduced requirement for energy storage in the submodules and a reduced inductor volume.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The Alternate Arm Converter (AAC) topology, in which the arms are connected in series with a high voltage switch, as shown in Fig. 5(c), allows the activation or deactivation of the complete arm. Therefore, it provides better performance than the standard MMC in terms of circulating current, power losses, and capacitor voltage ripple [143].”
From Modular Multilevel Converters: Recent Achievements and Challenges (2021) · cites this paper as [143]
Citations
Cites
An innovative modular multilevel converter topology suitable for a wide power range
Lesnicar, A., & Marquardt, R. (2004) · 2003 IEEE Bologna Power Tech Conference Proceedings, · doi:10.1109/ptc.2003.1304403 · Cited by 2,908 · cited 2×
“The well-established modular multilevel converter (MMC) [4] offers both high power efficiency and high-quality waveforms.”
BackgroundMethodCircuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
Perez, M. A., Bernet, S., Rodriguez, J., Kouro, S., & Lizana, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310127 · Cited by 1,346 · cited 2×
“by using hybrid stacks consisting of both full- and half-bridge SMs [15]–[20] or new SM circuits such as the double clamped submodule [21]–[24] and other designs [17], [25]–[27].”
BackgroundMethodModular Multilevel Converters for HVDC Applications: Review on Converter Cells and Functionalities
Nami, A., Liang, J., Dijkhuizen, F., & Demetriades, G. D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2327641 · Cited by 1,042
HVDC Circuit Breakers: A Review Identifying Future Research Needs
Franck, C. M. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2095889 · Cited by 909 · cited 1×
“any further rectification of ac-side fault current [9], and on multiterminal schemes, dc circuit breakers [10]–[14] are needed in order to prevent the entire dc grid from being blacked out as a result of a single dc-side fault.”
BackgroundMarquardt, R. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5544594 · Cited by 773 · cited 1×
“by using hybrid stacks consisting of both full- and half-bridge SMs [15]–[20] or new SM circuits such as the double clamped submodule [21]–[24] and other designs [17], [25]–[27].”
MethodDesign, Control and Application of Modular Multilevel Converters for HVDC Transmission Systems
Sharifabadi, K., Harnefors, L., Nee, H., Norrga, S., & Teodorescu, R. (2016) · Wiley eBooks · doi:10.1002/9781118851555 · Cited by 678
Locating and Isolating DC Faults in Multi-Terminal DC Systems
Tang, L., & Ooi, B.-T. (2007) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2007.899276 · Cited by 640 · cited 1×
“any further rectification of ac-side fault current [9], and on multiterminal schemes, dc circuit breakers [10]–[14] are needed in order to prevent the entire dc grid from being blacked out as a result of a single dc-side fault.”
BackgroundProactive Hybrid HVDC Breakers - A key Innovation for Reliable HVDC Grids
Häfner, J., & Jacobson, B. (2011) · Medical Entomology and Zoology · Cited by 556
Design and Operation of a Hybrid Modular Multilevel Converter
Zeng, R., Xu, L., Yao, L., & Williams, B. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2320822 · Cited by 455 · cited 3×
“Here, the H-MMC is taken to have the same number of SMs as the HB-MMC but with half of them replaced by full-bridge SMs [16].”
MethodResultModular Multilevel Converter topologies with DC-Short circuit current limitation
Marquardt, R. (2011) · 8th International Conference on Power Electronics - ECCE Asia · doi:10.1109/icpe.2011.5944451 · Cited by 413
Research works printed but not linked: 6
- trainer, 2010, A new hybrid voltage-sourced converter for HVDC power transmission, Proc CIGRE Session, 4b
- ahmed, 2011, Prospects and challenges of future HVDC supergrids with modular multilevel converters, Proc 14th IEEE Appl Power Electron Conf, 1
- 2014, Terminology for Voltage-Sourced Converters for High-Voltage Direct Current Systems BS EN 62747 2014
- 2014, Power Losses in Voltage Sourced Converter (VSC) Valves for High-Voltage Direct Current Systems Part 2 Modular Multilevel Converters BS EN 62751–2 2014
- 2014, Power Losses in Voltage Sourced Converter (VSC) Valves for High-Voltage Direct Current Systems Part 1 General Requirements BS EN 62751–1 2014
- judge, 2015, Hardware testing of the alternate arm converter operating in its extended overlap mode, Cigre HVDC
Cited by
Items 101–148 of 148
Sub-Module Capacitor Voltage Control for Alternate Arm Converter With Current Commutation Modulation
Yang, H., Qu, Q., Chen, C., Fan, S., Xiang, X. J., Li, W., & He, X. (2023) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2023.3330892 · Cited by 4
“Restrictions apply. the “extended-overlap (EO)” method [23].”
Sharifi, S., Bieber, L. M., Wang, L., & Jatskevich, J. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3418431 · Cited by 4
“With these criteria in mind, this section benchmarks the SMPC against renowned competitors in the literature: the conventional variants of MMC, i.e., the HB/MBSM-MMC [11], [14]; the EO-AAC [21]; the I-AAC [22]; and the newly proposed HAM-MMC [24].”
Vermeersch, P., Gruson, F., Merlin, M., Guillaud, X., & Egrot, P. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8914985 · Cited by 4
“So far, solutions based on the use of DC inductors have been proposed by [10] and [11].”
MethodSelf-citationA Reduced Arm DC–AC Modular Multilevel Converter Topology
Parida, N., & Das, A. (2021) · IETE Technical Review · doi:10.1080/02564602.2021.1884611 · Cited by 4
“Another hybridMMC topology with reduced number of submodules is presented in [15, 16].”
BackgroundThermal Characterization of the Alternate Arm Converter for HVDC Applications
Wickramasinghe, H. R., Wang, W., Ma, K., & Konstantinou, G. S. (2019) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2019.8755183 · Cited by 3
“Operation with an overlap angle greater than 60◦ is also possible, in an operation mode referred as “extendedoverlap” [5].”
BackgroundThe Impact of Point-To-Point VSC-HVDC Protection on Short-Term AC System Voltage
Chaffey, G. P., Hertem, D. V., Svensson, N., Norrga, S., & Ängquist, L. (2018) · IEEE PES Innovative Smart Grid Technologies Europe · doi:10.1109/isgteurope.2018.8571812 · Cited by 3
Self-citationZero-Current Switching for the Alternate Arm Converter through On-Load Tap Changers
Wickramasinghe, H. R., Konstantinou, G. S., & Pou, J. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8557788 · Cited by 4
A Reduced-Switching-Frequency Modulation Method for Hybrid MMCs Under Over-Modulation Conditions
Hu, P., Yin, R., Teodorescu, R., Wang, S., & Guerrero, J. M. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591364 · Cited by 3
“Therefore, several DC-fault tolerant topologies such as full-bridge sub-module (FBSM) MMCs [8], clampdouble SM MMCs [9], Alternate Arm Converters (AACs) [10]-[12] and hybrid MMCs [13]-[15] are proposed and analyzed.”
BackgroundGray, P. A., & Lehn, P. W. (2019) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2019.8769675 · Cited by 3
“Subsequent to the MMC, other modular multilevel converter topologies have been proposed for interconnecting ac and dc networks, as in [2]–[4], and for interconnecting dc networks, such as in [5]–[13].”
BackgroundOn Stored Energy Requirement in the Alternate Arm Converter
Vermeersch, P., Gruson, F., Guillaud, X., Egrot, P., & Merlin, M. (2019) · doi:10.1109/ptc.2019.8810502 · Cited by 3
“Section IV presents results of the stored energy requirement estimation in different cases, and fnally, the study is extended to the EO-AAC (Extended Overlap AAC) with active DC Filtering control strategy which has been presented in [6].”
BackgroundMethodSelf-citationChivite-Zabalza, F. J., Trainer, D. R., Nicholls, J. C., Outram, J., & Davidson, C. C. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8915138 · Cited by 3
Self-citationContribution to the design and control of the extended overlap-alternate arm converter
Vermeersch, P. (2021) · theses.fr (ABES) · doi:10.70675/dbb74d5ezb910z4bdazbd06z4dfe8754f0e4 · Cited by 5
An adaptive reclosing scheme for flexible DC grid based on residual voltage S-transformation
Dai, Y. T., Shu, H., An, N., Tang, Y., & Han, Y. (2025) · Scientific Reports · doi:10.1038/s41598-025-96571-w · Cited by 3
“Literature 15 proposed a scheme to realize fault protection and reclosure of DC power grid by changing the topology of the converter station sub-module of DC power grid, but the economics and engineering practicability of this scheme need to be further discussed.”
Multiplexed-Stack Converter With DC-Fault Ride-Through Capability and High Compactness
Bieber, L. M., Wang, L., & Jatskevich, J. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3324873 · Cited by 2
“The EO-AAC’s operating voltage is chosen at its optimal value of V 1h = ( 2 / 3 )v DC [11], which enables its stack currents to be continuous.”
BackgroundInfluentialA Five-level Hybrid Modular Multilevel Converter with High Efficiency and Power Density
Liu, J., & Dong, D. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362046 · Cited by 2
Half-Wave Phase Shift Modulation for Hybrid Modular Multilevel Converter with Wide-Range Operation
Ma, J., Peng, Y., Su, Z., Gu, Y., Ni, Q., Yang, Y., Wang, Y., & Liu, J. (2024) · Electronics · doi:10.3390/electronics13173556 · Cited by 2
Derivation and Comparison for Modular Multilevel Converter Topologies with Hybrid Structures
Fan, S., Yang, H., Xiang, X. J., Li, W., Yang, H., He, X., & Zhao, R. (2020) · International Conference on HVDC (HVDC) · doi:10.1109/hvdc50696.2020.9292699 · Cited by 2
“Many efforts have been made to improve the modular converter topologies and some of the other topologies are proposed and analyzed in [16-18].”
BackgroundAnnenkov, E. O., Zubova, E. V., Спартакович, С. А., & Федосов, Д. С. (2022) · iPolytech Journal · doi:10.21285/1814-3520-2022-3-401-414 · Cited by 2
Woldegiorgis, D. (2023) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2023.00019 · Cited by 2
A Half-Wave Alternating Multilevel Converter with High Submodule Utilization*
Yu, Y., Gao, Y., Wang, Y., Li, Y., Su, Z., & Wang, R. (2023) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon51785.2023.10311626 · Cited by 2
A Hybrid Chain-Link Push-Pull Series Connected (H-CL-P2SC) M2C with DC Fault Blocking Capability
Kaya, M., Costabeber, A., Watson, A. J., Tardelli, F., & Clare, J. (2020) · IEEE International Conference on Power Electronics, Drives and Energy Systems · doi:10.1109/pedes49360.2020.9379514 · Cited by 1
“The A2C improves some of the aspects of the M2C, such as lowering the capacitor and energy storage requirements whilst adding dc fault ride through capability [10], [11].”
BackgroundNegative-Sequence Current Control with a Hybrid Three-Level Modular Multilevel Converter
Bieber, L. M., Yoo, P., Wang, L., & Jatskevich, J. (2022) · IEEE Electrical Power and Energy Conference (EPEC) · doi:10.1109/epec56903.2022.10000117 · Cited by 1
“Such alternatives include hybrid converter topologies such as the hybrid three-level converter (H3LC, [7]), the hybrid five-level converter (H5LC, [8]), the alternate-arm converter (AAC, [9],[10]), and the thyristor-based hybrid three-level converter (TH3LC, [11], [12]).”
BackgroundAn improved mixed-cell submodule based modular multilevel converter (MMC) suitable for HVDC System
Chaudhari, H., & Darji, P. B. (2025) · International Journal of Electronics · doi:10.1080/00207217.2025.2506019 · Cited by 1
“Multiple hybrid multilevel converters have been suggested in academic research to minimise the size and expense of the converter while also integrating DC-side fault current blocking functionality (Merlin et al., 2018; Zhang et al., 2018).”
Li, Q., Wang, Y., & Li, B. (2026) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2025.111470 · Cited by 1
An LCC-AAC Hybrid High-voltage DC Transmission System
Sun, P., Wickramasinghe, H. R., & Konstantinou, G. S. (2020) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia48364.2020.9367720 · Cited by 1
“The extended overlap AAC (EO-AAC) offers reduced filtering requirements in the dc side, compared with short overlap AAC (SO-AAC), at the cost of increased number of devices, hence higher losses [11], [12].”
BackgroundAn HVDC inverter based on the Asymmetric Alternate Arm Converter with thyristor valves
Soto, D., Pena, R. S., Flores, L., Andrade, I., & Blasco-Giménez, R. (2021) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon48115.2021.9589910 · Cited by 1
“The use of string of SMs in combination with the conventional ON-OFF valve, a concept developed from the Alternate Arm Converter (A2C) topology [4], [5], allows the string of cells to be rated at a fraction of the arm voltage of the conventional MMC topology, therefore requiring a smaller number of cells than the conv…”
MethodDC Power Filter Design for a Neutral-Point Clamped Hybrid Multilevel Converter
Collins, C. T., & Green, T. C. (2022) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec-himeji2022-ecce53331.2022.9807067 · Cited by 1
“The AAC was later improved to include inherent active DC filtering by extending the overlap period of the arms, this topology is known as the Extended-Overlap AAC (EOAAC) [10].”
MethodSelf-citationPerformance Analysis of the Alternate Arm Converter for Electric Drive Applications
Karaka, N. R., Reddy, G. A., & Shukla, A. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9947567 · Cited by 1
An Independent Arm Modulation Strategy of the AM-MMC for Circulating Current Suppression
Zhang, Z., & Wang, Y. (2023) · Power Electronics and Power System Conference (PEPSC) · doi:10.1109/pepsc58749.2023.10394826 · Cited by 1
“However, with immense number of sub-modules (SMs) and floating capacitors, the bulky volume and high cost of the MMC restrict its further extensions [3-4].”
BackgroundA Control Technique to Eliminate dc Harmonics in Series-Connected Hybrid VSCs for HVDC Applications
Patro, S. K., & Shukla, A. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9236012
“However, these SCCs suffered from dc-link voltage and current harmonics produced by the switching transitions of the director switches (DSs), which necessitates dc side filters [9], [12]-[17].”
BackgroundAn AC Current-Limiting Strategy for the Improved Modular Multilevel Converter
Fang, X., Hu, Z., Gao, C., Xiong, J., & Zhang, K. (2021) · IEEE ECCE Asia Downunder · doi:10.1109/ecce-asia49820.2021.9479308
Leow, Y. Y., & Ooi, C. A. (2021) · Journal of Electrical Engineering · doi:10.2478/jee-2021-0056
Woldegiorgis, D., & Mantooth, H. A. (2022) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg54999.2022.9923244
“Hence, the asymmetric alternate arm converter topology has lower number of devices compared to other similar HVDC converter topologies such as the modular multilevel converter topology [9], [10] and the conventional (symmetric) alternate arm converter topology [11], [12].”
BackgroundMethod2018 Index IEEE Transactions on Power Electronics Vol. 33
(2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3272449
Lan, J., & Chen, W. (2023) · International Conference Power and Energy Systems Engineering · doi:10.1109/cpese59653.2023.10303180
Energy Balancing Control for Alternate Arm Converter Considering Commutation Process
Yang, F., Wang, C., Yang, H., & Li, W. (2024) · CPSS & IEEE International Symposium on Energy Storage and Conversion (ISESC) · doi:10.1109/isesc63657.2024.10785481
Control of Dual Asymmetric Alternate Arm HVDC Converter Under AC and DC Network Faults
Soto, D., Pena, R. S., Flores, L., & Blasco-Giménez, R. (2025) · Lecture notes in electrical engineering · doi:10.1007/978-3-031-73921-7_19
Modeling and Control Development of a Cost-Effective Hybrid Modular Multilevel Converter
Motwani, J. K., Boroyevich, D., & Dong, D. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861699
Sharifi, S., Bieber, L. M., Wang, L., & Jatskevich, J. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3620772
“The TB-DS EO-AAC is assumed to be operating under its original principles, i.e., stacks voltage and current waveforms, as already proposed by Merlin et al. [6].”
InfluentialTopology and Control of a Single-arm Multiplexing Multilevel Converter with Wide Operation Range
Su, Z., Wang, Y., Gao, Y., Wang, R., Yu, Y., & Wu, X. (2025) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon58223.2025.11221890
“Then, the extend overlap conduction dramatically increases the number of SMs, which undermines the lightweight design of the converter[12], [13].”
Review on Low-Capacitance Techniques for Modular Multilevel Converters
Li, Z., Xin, Q., Cai, F., Huang, B., Song, Q., Wang, Z., & Zhao, B. (2025) · IEEE Access · doi:10.1109/access.2025.3630073 · Cited by 1
Yoo, P. (2023) · cIRcle (University of British Columbia) · doi:10.14288/1.0423614
Dai, Y. T., Shu, H., Tang, Y., & Gong, F. (2026) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2025.111519
Zhang, Z., Wang, Y., Liu, B., Zhang, T., Wang, S., & Liu, Q. (2026) · IET Power Electronics · doi:10.1049/pel2.70205
Flying-Stack Modular Multilevel Converter for Wide Range High-AC/Low-DC Medium Voltage Applications
Sharifi, S., Bieber, L. M., Wang, L., & Jatskevich, J. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3694086
“As a derivative of the alternate arm converter (AAC) [24], the extended-overlap AAC (EO-AAC), proposed in [25], is another promising alternative to the FBSM-MMC and is suitable for high-AC/low-DC voltage conversion.”
Akbari, E., & Shadlu, M. S. (2026) · High Voltage · doi:10.1049/hve2.70209
Chaudhari, H. N., Vaghela, D. J., & Darji, P. B. (2026) · Engineering Research Express · doi:10.1088/2631-8695/aeba43
Xia, P., Jansen, M., & Judge, P. D. (2026) · Energy Conversion Congress and Expo Europe (ECCE Europe) · doi:10.1109/ecceeurope67962.2026.11738032
“The Alternative Arm Converter (AAC) is another alternative topology of the MMC that incorporates additional direct power switches together with full bridge submodules to realise a clamping action in each half fundamental cycle [8].”
Self-citation
Metadata
- Authors
- Merlin, M. M. C., Soto-Sanchez, D., Judge, P. D., Chaffey, G., Clemow, P., Green, T. C., Trainer, D. R., & Dyke, K. J.
- Affiliations
- Imperial College London (GB)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2018-05
- Volume
- 33
- Issue
- 5
- Pages
- 3898-3910
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2742461864
- Cited by
- 142
- References
- 54
- Citations by year
- 2026: 5 · 2025: 7 · 2024: 11 · 2023: 22 · 2022: 20 · 2021: 15 · 2020: 23 · 2019: 18 · 2018: 19
- FWCI
- 7.05
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- IEEE Transactions on Power Electronics (publishedVersion, cc-by)
- Edinburgh Research Explorer (University of Edinburgh) (submittedVersion, cc-by)
- Spiral (Imperial College London) (submittedVersion, cc-by)
- Funders
- Engineering and Physical Sciences Research Council (EP/I013636/1, EP/K035096/1, EP/L014351/1)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- alternate arm converter, modular multilevel converter, DC fault ride-through, voltage source converter, DC current ripple, power efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.