Improved Energy Balancing of Grid-Side Modular Multilevel Converters by Optimized Feedforward Circulating Currents and Common-Mode Voltage
The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
In contrast to the conventional feedback approach, the energy balancing task of a grid-side modular multilevel converter (MMC) with half-bridge cells and an isolated ac star point is considered as an optimization problem. As a result, nominal trajectories for circulating currents and common-mode voltage are obtained that inherently steer the system back to a balanced operation within finite time. The method relies on an MMC arm energy model, allowing for algebraic parameterization of almost all MMC variables during optimization, which considerably reduces the computational cost. Thus, the optimized solution is the one selected from a family of trajectories that meets the balancing goal. Owing to the trajectory planning of the MMC energies, the search for a solution is inherently limited to the domain of realistic energy variations and no balancing error remains even during transfers between operating regimes, i.e., the task of the balancing controller is reduced to the compensation of parameter uncertainties and disturbances. Here, a grid-side MMC is considered in the optimization in contrast to the previous work, which has been restricted to passive $RL$ loads. Measurement results reveal drawbacks of the previous solution after adoption of a grid-side application. A dedicated candidate transfer for grid-side applications eliminate the drawbacks and regains the improved balancing performance as shown by measurements.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Both alternatives have shown to provide proper regulation, but the energy approach has the advantage of providing a linear relationship between power and currents, keeping the same dynamic behavior even if the operating point changes.”
From Modular Multilevel Converters: Recent Achievements and Challenges (2021) · cites this paper as [64]
Citations
Cites
An innovative modular multilevel converter topology suitable for a wide power range
Lesnicar, A., & Marquardt, R. (2004) · 2003 IEEE Bologna Power Tech Conference Proceedings, · doi:10.1109/ptc.2003.1304403 · Cited by 2,908 · cited 1×
“THE topology of modular multilevel converters (MMCs) consists of two arms per phase each equipped with a series connection of half-bridge or full-bridge cells and arm inductors to suppress circulating currents [1].”
BackgroundCircuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
Perez, M. A., Bernet, S., Rodriguez, J., Kouro, S., & Lizana, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310127 · Cited by 1,346 · cited 1×
“This enables fault-tolerant generation of multilevel voltages and favors the use in mediumand high-voltage applications [2]–[5].”
BackgroundMarquardt, R. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5544594 · Cited by 773
Low output frequency operation of the Modular Multi-Level Converter
Korn, A. J., Winkelnkemper, M., & Steimer, P. (2010) · 2010 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2010.5617802 · Cited by 426
Pou, J., Ceballos, S., Konstantinou, G., Agelidis, V. G., Picas, R., & Zaragoza, J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336608 · Cited by 406 · cited 1×
“, for 0 Hz operation [16], [18], capacitor voltage ripple reduction [21], [22], or periodic loads [10].”
BackgroundCascaded Control System of the Modular Multilevel Converter for Feeding Variable-Speed Drives
Kolb, J., Kammerer, F., Gommeringer, M., & Braun, M. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2299894 · Cited by 269 · cited 2×
“, for 0 Hz operation [16], [18], capacitor voltage ripple reduction [21], [22], or periodic loads [10].”
BackgroundMethodA new highly modular medium voltage converter topology for industrial drive applications
Hiller, M., Krug, D., Sommer, R., & Rohner, S. (2009) · European Conference on Power Electronics and Applications · Cited by 230
Cui, S., & Sul, S.-K. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2513426 · Cited by 210 · cited 1×
“conditions [6], [7], and in the presence of (unbalanced) integration of energy storage devices [8], [9], or when feeding pulsed dc loads [10].”
BackgroundControl of the Modular Multi-Level Converter for minimized cell capacitance
Engel, S. P., & Doncker, R. W. D. (2011) · RWTH Publications (RWTH Aachen) · Cited by 201
Integrated current control, energy control and energy balancing of Modular Multilevel Converters
Munch, P., Gorges, D., Izak, M., & Liu, S. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5675185 · Cited by 173
Cited by
Modular Multilevel Converters: Recent Achievements and Challenges
Perez, M. A., Ceballos, S., Konstantinou, G., Pou, J., & Aguilera, R. P. (2021) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2021.3060791 · Cited by 327
“The outermost control loop is usually focused on regulating the average arm capacitor voltages [63], or energies [64].”
BackgroundNguyen, T. H., Hosani, K. A., Moursi, M. S. E., & Blaabjerg, F. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2862247 · Cited by 173
Liang, G., Tafti, H. D., Farivar, G. G., Pou, J., Townsend, C. D., Konstantinou, G. S., & Ceballos, S. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3014739 · Cited by 72
“strictly zero average active power from each submodule (SM) is required to maintain balanced capacitor voltages [11].”
BackgroundComprehensive Comparison of Modular Multilevel Converter Internal Energy Balancing Methods
Milovanović, S., & Dujić, D. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3052607 · Cited by 38
“example, energy controllers described in [14] or [15], [16] represent an extended variation of the controller described in [13].”
BackgroundHuang, Y., Liu, F., Zhuang, Y., Diao, X., Lei, Y., & Zhu, H. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3388844 · Cited by 23
“Using the methodology of [16], it can be obtained that the traditional MMC balance limit is i o _ 1 : i o _ 2 = 0.795: 0.205.”
MethodInfluentialEnergy Pulsation Reduction in Modular Multilevel Converters Using Optimized Current Trajectories
Braeckle, D., Himmelmann, P., Gröll, L., Hagenmeyer, V., & Hiller, M. (2021) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2021.3065115 · Cited by 20
“In addition, the small inductive voltage drops are also omitted for simplification [13], [20].”
BackgroundGensior, A., & Fehr, H. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3008317 · Cited by 10
“As a direct approach to deal with this problem, the methods developed in [18] and [19] predict the internal dynamics in order to find suitable reference trajectories.”
MethodSelf-citationEigenvalue Optimization of the Energy-Balancing Feedback for Modular Multilevel Converters
Fehr, H., & Gensior, A. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2900837 · Cited by 10
Self-citationAnalysis of MMC Dynamics in DQZ Coordinates for Vertical and Horizontal Energy Balancing Control
Bergna‐Diaz, G., Freytes, J., Guillaud, X., D’Arco, S., & Suul, J. A. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8592881 · Cited by 7
Li, J., Zhang, Z., Li, Z., & Babayomi, O. O. (2023) · Energies · doi:10.3390/en16155772 · Cited by 7
Energy-Balancing of a Modular Multilevel Converter Using an Online Trajectory Planning Algorithm
Gui, Q., Gnarig, J. L., Fehr, H., & Gensior, A. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215848 · Cited by 5
“Modeling For the trajectory planning in this text, a simplified model as in [9] is used.”
BackgroundMethodSelf-citationOvervoltage Suppression for Modular Multilevel Converter With Switch Open-Circuit Fault
Wang, Z., & Li, P. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3128890 · Cited by 4
Online Trajectory Planning During Low-Voltage FRT of a Modular Multilevel Converter
Fehr, H., & Gensior, A. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215849 · Cited by 3
“Although the parametrization (3) increases the order of the internal dynamics in contrast to the solution in [12], it covers a wider operating range, including zero ac power.”
BackgroundSelf-citationGui, Q., Fehr, H., & Gensior, A. (2021) · European Conference on Power Electronics and Applications · doi:10.23919/epe21ecceeurope50061.2021.9570671 · Cited by 3
“Trajectory planning considering a constant dc voltage for MMCs has already been proposed in [8] and [9].”
BackgroundSelf-citationFehr, H. (2020) · Qucosa (Saxon State and University Library Dresden) · Cited by 2
Self-citation2018 Index IEEE Transactions on Power Electronics Vol. 33
(2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3272449
Optimal Energy-based Valve Current Reference Generator for MMC VSC-HVDC
Briff, P., Dang, S., & Jasim, O. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8915528
“In another example, the authors of [10] propose an improved energy control algorithm using the trajectories of the valves energies in MMC.”
MethodBin Wan Mohammad, W. M. F. A., Hillermeier, C., Richter, M., & Deutschland (2023)
Lorenz, A., Thomas, F., Fischer, F., Krishna, A., & Graichen, K. (2026) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2026.3717957
“In [15], the objective of energy balancing in MMCs is realized through an optimized trajectory planner where the energies are regulated to a desired reference in finite time.”
Metadata
- Authors
- Fehr, H., & Gensior, A.
- Affiliations
- Technische Universität Dresden (DE)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2018-12
- Volume
- 33
- Issue
- 12
- Pages
- 10903-10913
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2793985072
- Cited by
- 17
- References
- 28
- Citations by year
- 2026: 1 · 2024: 1 · 2023: 1 · 2021: 5 · 2020: 4 · 2019: 2 · 2018: 3
- FWCI
- 1.34
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Funders
- Deutsche Forschungsgemeinschaft (GE 2502/4-1)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- modular multilevel converter, energy balancing, circulating current, common-mode voltage, trajectory planning, feedforward control, grid-side converter, parameter uncertainty compensation, disturbance rejection
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.