Dynamic Capabilities of Multi-MHz Inductive Power Transfer Systems Demonstrated With Batteryless Drones
Open accessThe DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Abstract
This paper presents the design of a multi-MHz inductive power transfer (IPT) system showcasing lightweight and energy-efficient solutions for non-radiative wireless power transfer. A proof of concept is developed by powering a drone without a battery that can hover freely in proximity to an IPT transmitter. The most challenging aspect, addressed here for the first time, is the complete system-level design to efficiently provide uninterrupted power flow while allowing for variable power demand and highly variable coupling factor. The proposed solution includes the design of lightweight air-core coils that can achieve sufficient coupling without degrading the aerodynamics of the drone, and the design of newly developed resonant power converters at both ends of the system. At the transmitting-end, a load-independent Class EF inverter, which can drive a transmitting-coil with constant current amplitude and achieves zero-voltage switching for the entire range of operation, was developed; and at the receiving-end, a hybrid Class E rectifier, which allows tuning for large changes in coupling and power demand, was used. For the demo, the range of motion of the drone was limited by a 7.5 cm nylon string tether, connected between the center of the transmitting-coil and the bottom of the drone. The design of the IPT system, including all the power conversion stages and the IPT link, is explained in detail. The results on performance and specific practical considerations required for the physical implementation are provided. An average end-to-end efficiency of 60% was achieved for a coupling range of 23%-5.8%. Relevant simulations concerning human exposure to electromagnetic fields are also included to assure that the demo is safe, according to the relevant guidelines. This paper is accompanied by a video featuring the proposed IPT system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ahlbom, A. (1998) · Health Physics · Cited by 5,817
Wireless Power Transfer via Strongly Coupled Magnetic Resonances
Kurs, A., Karalis, A., Moffatt, R., Joannopoulos, J. D., Fisher, P., & Soljačić, M. (2007) · Science · doi:10.1126/science.1143254 · Cited by 5,576 · cited 1×
“In [7], this capability was showcased: a light bulb was powered wirelessly using self resonant coils, where the separation between the source and the load was reported to be of four-coil diameters.”
MethodWireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185 · cited 1×
“Encouraged by this impressive precedent from 1969, we developed a wireless power transfer system to wirelessly power a UAV, using not a microwave beam, but inductive coupling, a non-radiative wireless power transfer solution which has been widely proposed to wirelessly charge electric vehicles [2], [3], [4].”
MethodGUIDELINES FOR LIMITING EXPOSURE TO TIME-VARYING ELECTRIC AND MAGNETIC FIELDS (1 Hz TO 100 kHz)
(2010) · Health Physics · doi:10.1097/hp.0b013e3181f06c86 · Cited by 2,164
Class E-A new class of high-efficiency tuned single-ended switching power amplifiers
Sokal, N. O., & Sokal, A. D. (1975) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1975.1050582 · Cited by 2,033 · cited 1×
“g Class E [31], EF2 [32], Φ2 [33], the load-independent achieves ZVS for the entire resistive load range.”
BackgroundA Critical Review of Recent Progress in Mid-Range Wireless Power Transfer
Hui, S. Y. R., Zhong, W., & Lee, C. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249670 · Cited by 1,465 · cited 1×
“However, IPT allows for efficiencies higher than 90 % to be achieved [5], [6], and could therefore become a normal solution to charge such vehicles.”
BackgroundClassifications, applications, and design challenges of drones: A review
Hassanalian, M., & Abdelkefi, A. (2017) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2017.04.003 · Cited by 1,454 · cited 3×
“The improvements in power capability, end-to-end efficiency and tolerance to variable coupling have significantly increased the viability of implementing multi-MHz IPT systems for wireless charging in a variety of applications, an example 2 of which is wireless charging for UAVs.”
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263 · cited 1×
“Encouraged by this impressive precedent from 1969, we developed a wireless power transfer system to wirelessly power a UAV, using not a microwave beam, but inductive coupling, a non-radiative wireless power transfer solution which has been widely proposed to wirelessly charge electric vehicles [2], [3], [4].”
MethodLin, J., Saunders, R. A., Schulmeister, K., Söderberg, P. G., Stuck, B. E., Swerdlow, A. J., Taki, M., Veyret, B., Ziegelberger, G., Repacholi, M. H., et al. (2010) · HAL · Cited by 1,261
Kazimierczuk, M. K., & Czarkowski, D. (1995) · Cited by 690
Diekhans, T., & De Doncker, R. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2393912 · Cited by 421
Bosshard, R., Kolar, J. W., Muhlethaler, J., Stevanovic, I., Wunsch, B., & Canales, F. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2311302 · Cited by 411 · cited 1×
“However, inductive power transfer (IPT) allows for efficiencies higher than 90% to be achieved [5], [6] and could, therefore, become a normal solution to charge such vehicles.”
BackgroundMaximizing DC-to-Load Efficiency for Inductive Power Transfer
Pinuela, M., Yates, D. C., Lucyszyn, S., & Mitcheson, P. D. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2215887 · Cited by 354 · cited 1×
“For example in [9] a dc-ac efficiency of 77 % was reported at 6 MHz and 3.”
BackgroundSelf-citationInductive Powering: Basic Theory and Application to Biomedical Systems
Schuylenbergh, K. V., & Puers, R. (2009) · Medical Entomology and Zoology · Cited by 240
Experiments Involving a Microwave Beam to Power and Position a Helicopter
Brown, W. (1969) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.1969.309867 · Cited by 178 · cited 3×
“Our demo uses a smaller UAV than the one in [1], and the wireless gap is shorter.”
BackgroundMethodA Dynamic EV Charging System for Slow Moving Traffic Applications
Zaheer, A., Neath, M., Beh, H. Z. Z., & Covic, G. A. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2628796 · Cited by 161 · cited 1×
“Encouraged by this impressive precedent from 1969, we developed a wireless power transfer system to wirelessly power a UAV, using not a microwave beam, but inductive coupling, a non-radiative wireless power transfer solution which has been widely proposed to wirelessly charge electric vehicles [2], [3], [4].”
MethodLight-weight wireless power transfer for mid-air charging of drones
Aldhaher, S., Mitcheson, P. D., Arteaga, J. M., Kkelis, G., & Yates, D. C. (2017) · 2017 11th European Conference on Antennas and Propagation (EUCAP) · doi:10.23919/eucap.2017.7928799 · Cited by 124 · cited 3×
“This set of equations is a practical solution to achieve load independent operation whilst operating at a lower input voltage than in our first prototype [19] or the solutions presented in previous works using this tuning methodology for Class EF inverters [24], [34], [35], [36].”
MethodSelf-citation13.56 MHz 1.3 kW resonant converter with GaN FET for wireless power transfer
Choi, J., Tsukiyama, D., Tsuruda, Y., & Rivas-Davila, J. (2015) · IEEE Wireless Power Transfer Conference · doi:10.1109/wpt.2015.7140167 · Cited by 85 · cited 1×
“For example, in [11], a 13.”
Load- and Position-Independent Moving MHz WPT System Based on GaN-Distributed Current Sources
Pacini, A., Costanzo, A., Aldhaher, S., & Mitcheson, P. D. (2017) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2017.2768031 · Cited by 80
Self-citationJahdi, S., Alatise, O., Alexakis, P., Ran, L., & Mawby, P. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2326999 · Cited by 76 · cited 1×
“The forward voltage of silicon carbide diodes tends to increase with temperature [38], and therefore, in order to achieve good efficiencies at low couplings, we designed for a maximum of 70 ◦C at the rectifier board.”
BackgroundMulti-MHz IPT Systems for Variable Coupling
Arteaga, J. M., Aldhaher, S., Kkelis, G., Yates, D. C., & Mitcheson, P. D. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2768244 · Cited by 73 · cited 3×
“Characterising motion as a probability distribution is useful because it allows optimising for the link and the circuits at both ends of the system for maximum overall energy efficiency as proposed in [10].”
BackgroundSelf-citationCompliance Testing Methodology for Wireless Power Transfer Systems
Nadakuduti, J., Douglas, M. G., Lu, L., Christ, A., Guckian, P., & Kuster, N. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2400455 · Cited by 37 · cited 1×
“Despite both [26] and [28] giving different incident reference field levels that assure compliance with the SAR limits specified in Table II for the worst case scenario, it is more appropriate when designing an IPT application to evaluate exposure limits using SAR simulations [29], [30].”
Method
Cited by
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
A Prospective Look: Key Enabling Technologies, Applications and Open Research Topics in 6G Networks
Bariah, L., Mohjazi, L., Muhaidat, S., Sofotasios, P. C., Kurt, G. K., Yanikomeroglu, H., & Dobre, O. A. (2020) · IEEE Access · doi:10.1109/access.2020.3019590 · Cited by 354
A Review on UAV Wireless Charging: Fundamentals, Applications, Charging Techniques and Standards
Chittoor, P. K., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3077041 · Cited by 269
Metadata
- Authors
- Arteaga, J. M., Aldhaher, S., Kkelis, G., Kwan, C., Yates, D. C., & Mitcheson, P. D.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2019-06
- Volume
- 34
- Issue
- 6
- Pages
- 5093-5104
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2891830083
- Cited by
- 181
- References
- 22
- FWCI
- 5.83
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.