Bidirectional Resonant CLLC Charger for Wide Battery Voltage Range: Asymmetric Parameters Methodology
The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
The CLLC bidirectional resonant converter has significant potential in battery chargers and dc microgrids, due to its bidirectional power transfer capability. To ensure uniform characteristics for bidirectional operation, secondary LC resonant tank components are usually designed to equal the primary LC components after reflection. This conventional design method is regarded as the symmetric design. It is used in applications where wide voltage regulation is not required, such as CLLC dc transformers. However, for bidirectional battery charger applications, the battery has a wide voltage range variation, and gain requirements during charging and discharging are different. These asymmetric characteristics could lead to undesirable large switching frequency range if a conventional symmetric CLLC design is employed. To address this issue, a detailed asymmetric parameters methodology (APM) is proposed in this article. It can design gain curves for charging and discharging modes separately. This enables overlapping of the switching frequency range for both modes, thereby reducing the bidirectional frequency range variation. It brings lower switching loss caused by excessive high frequency, and relieve the extra conduction loss and current stress of power switches as well. Finally, a detailed analysis of the proposed APM is provided and validated with simulations and experiments.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Response surface methodology: Process and product optimization using designed experiments
Draper, N. R. (1997) · Journal of Statistical Planning and Inference · doi:10.1016/s0378-3758(97)81631-x · Cited by 1,344
Design and Analysis of Experiments
Amidan, B., Dean, A., & Voss, D. (2000) · Technometrics · doi:10.2307/1271085 · Cited by 1,158
Jung, J.-H., Kim, H.-S., Ryu, M.-H., & Baek, J.-W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2213346 · Cited by 621 · cited 4×
“The CLLC resonant tank and high-frequency transformer are in the middle of the two full bridges, and there are six parameters to be designed, which are resonant inductors Lr1 and Lr2, resonant capacitors Cr1 and Cr2, magnetizing inductance Lm, and transformer ratio n. Due to the proposed asymmetric design method, reso…”
MethodInfluentialDesign of Bidirectional DC–DC Resonant Converter for Vehicle-to-Grid (V2G) Applications
Zahid, Z. U., Dalala, Z. M., Chen, R., Chen, B., & Lai, J.-S. (2015) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2015.2476035 · Cited by 359 · cited 1×
“Although capacitors ratio has been adopted for monotonic gain curves [24], detailed asymmetric design methodology, the relationship among coupled parameters, and accurate switching frequency models are lacking in the literature.”
BackgroundA High-Efficiency High-Density Wide-Bandgap Device-Based Bidirectional On-Board Charger
Li, B., Li, Q., Lee, F. C., Liu, Z., & Yang, Y. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2845846 · Cited by 259 · cited 1×
“topology is proposed to improve efficiency [4]–[8], where the power factor correction (PFC) is adopted in the first stage to regulate dc link-voltage for the wide output voltage variation.”
BackgroundHigh-Efficiency Isolated Bidirectional AC–DC Converter for a DC Distribution System
Kim, H.-S., Ryu, M.-H., Baek, J.-W., & Jung, J.-H. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2213347 · Cited by 229
Switching Power Supplies A - Z
(2012) · Elsevier eBooks · doi:10.1016/c2010-0-68564-6 · Cited by 215 · cited 1×
“Moreover, since the minimum switching frequency is higher, the size of the transformer can be smaller [25].”
BackgroundXue, F., Yu, R., & Huang, A. Q. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2686307 · Cited by 199 · cited 1×
“, chargers for energy storage systems in dc microgrid [9].”
BackgroundBi-Directional CLLC Converter With Synchronous Rectification for Plug-In Electric Vehicles
Zou, S., Lu, J., Mallik, A., & Khaligh, A. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2773430 · Cited by 185 · cited 2×
“To further improve efficiency, synchronous rectification (SR) control is introduced [15], [16].”
BackgroundA Novel Three-Level CLLC Resonant DC–DC Converter for Bidirectional EV Charger in DC Microgrids
Xuan, Y., Yang, X., Chen, W., Liu, T., & Hao, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2972446 · Cited by 156 · cited 2×
“3033982 to expand the output voltage range and reduce the voltage stress [1].”
Background
Cited by
Wang, J., Wang, B., Zhang, L., Wang, J., Shchurov, N. I., & Malozyomov, B. V. (2022) · Green Energy and Intelligent Transportation · doi:10.1016/j.geits.2022.100010 · Cited by 153
Mudiyanselage, G. A., Keshmiri, N., & Emadi, A. (2023) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2023.3331180 · Cited by 104
Lyu, D., Soeiro, T. B., & Bauer, P. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3176826 · Cited by 103
Zhou, K., Wu, Y., Wu, X., Sun, Y., Teng, D., & Liu, Y. (2023) · Electronics · doi:10.3390/electronics12071581 · Cited by 82
Aarninkhof, B. O., Lyu, D., Soeiro, T. B., & Bauer, P. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3279211 · Cited by 82
“…output voltage range has been achieved [5], [6], [7], [8], [9], [10], [11], [13], [14], [27], [28], [29], [30], [31], [32], [33], [34], [35], [36], [37], [38], [39], [40], [41], [42], [43], [44], [45], [46], [47], [48], [49], [50], [51], [52], [53], [54], [55], [56], [57], [58], [59], [60], [61].”
Influential
Metadata
- Authors
- Min, J., & Ordonez, M.
- Affiliations
- University of British Columbia (CA)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2021-06
- Volume
- 36
- Issue
- 6
- Pages
- 6662-6673
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W3096732586
- Cited by
- 152
- References
- 28
- Citations by year
- 2026: 15 · 2025: 32 · 2024: 37 · 2023: 34 · 2022: 23 · 2021: 11
- FWCI
- 5.84
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Funders
- Natural Sciences and Engineering Research Council of Canada
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Induction Heating and Inverter Technology
- Keywords
- CLLC resonant converter, bidirectional resonant converter, battery charger, switching loss reduction, DC microgrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Bidirectional Resonant CLLC Charger for Wide Battery Voltage Range: Asymmetric Parameters Methodology. https://app.cochat.ai/papers/10.1109/tpel.2020.3033982
- The paper
- Min, J., & Ordonez, M. (2021). Bidirectional Resonant CLLC Charger for Wide Battery Voltage Range: Asymmetric Parameters Methodology. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2020.3033982
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.