The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Design Methodology of Bidirectional CLLC Resonant Converter for High-Frequency Isolation of DC Distribution Systems
Abstract
A bidirectional full-bridge CLLC resonant converter using a new symmetric LLC-type resonant network is proposed for a low-voltage direct current power distribution system. This converter can operate under high power conversion efficiency because the symmetric LLC resonant network has zero-voltage switching capability for primary power switches and soft commutation capability for output rectifiers. In addition, the proposed topology does not require any snubber circuits to reduce the voltage stress of the switching devices because the switch voltage of the primary and secondary power stage is confined by the input and output voltage, respectively. In addition, the power conversion efficiency of any directions is exactly same as each other. Using digital control schemes, a 5-kW prototype converter designed for a high-frequency galvanic isolation of 380-V dc buses was developed with a commercial digital signal processor. Intelligent digital control algorithms are also proposed to regulate output voltage and to control bidirectional power conversions. Using the prototype converter, experimental results were obtained to verify the performance of the proposed topology and control algorithms. The converter could softly change the power flow directions and its maximum power conversion efficiency was 97.8% during the bidirectional operation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zhao, B., Yu, Q., & Sun, W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2180928 · Cited by 932
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
A Bidirectional DC–DC Converter for an Energy Storage System With Galvanic Isolation
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.909248 · Cited by 780
Protection of Low-Voltage DC Microgrids
Salomonsson, D., Soder, L., & Sannino, A. (2009) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2009.2016622 · Cited by 712
Future electronic power distribution systems a contemplative view
Boroyevich, D., Cvetkovic, I., Dong, D., Burgos, R., Wang, F., & Lee, F. (2010) · 2010 12th International Conference on Optimization of Electrical and Electronic Equipment · doi:10.1109/optim.2010.5510477 · Cited by 585
Tan, N. M. L., Abe, T., & Akagi, H. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2108317 · Cited by 490
Chen, W., Rong, P., & Lu, Z. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2037099 · Cited by 464
Operation Mode Analysis and Peak Gain Approximation of the LLC Resonant Converter
Fang, X., Hu, H., Shen, Z. J., & Batarseh, I. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2168545 · Cited by 426
Fan, H., & Li, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160652 · Cited by 401
Quasi-Resonant Zero-Current-Switching Bidirectional Converter for Battery Equalization Applications
Lee, Y.-S., & Cheng, G.-T. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.880349 · Cited by 394
Cited by
Zhao, B., Song, Q., Liu, W., & Sun, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2289913 · Cited by 1,886
Extreme Fast Charging of Electric Vehicles: A Technology Overview
Tu, H., Feng, H., Srdic, S., & Lukic, S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2958709 · Cited by 898
He, P., & Khaligh, A. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2630927 · Cited by 501
Khalid, M. R., Khan, I. A., Hameed, S., Asghar, M. S. J., & Ro, J. (2021) · IEEE Access · doi:10.1109/access.2021.3112189 · Cited by 353
Rajendran, G., Vaithilingam, C. A., Misron, N., Naidu, K., & Ahmed, M. R. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103099 · Cited by 247
Metadata
- Authors
- Jung, J.-H., Kim, H.-S., Ryu, M.-H., & Baek, J.-W.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2013-04
- Volume
- 28
- Issue
- 4
- Pages
- 1741-1755
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2113890330
- Cited by
- 621
- References
- 27
- FWCI
- 8.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design Methodology of Bidirectional CLLC Resonant Converter for High-Frequency Isolation of DC Distribution Systems. https://app.cochat.ai/papers/10.1109/tpel.2012.2213346
- The paper
- Jung, J.-H., Kim, H.-S., Ryu, M.-H., & Baek, J.-W. (2013). Design Methodology of Bidirectional CLLC Resonant Converter for High-Frequency Isolation of DC Distribution Systems. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2012.2213346
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
