Bidirectional Resonant CLLC Charger for Wide Battery Voltage Range: Asymmetric Parameters Methodology
The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
The CLLC bidirectional resonant converter has significant potential in battery chargers and dc microgrids, due to its bidirectional power transfer capability. To ensure uniform characteristics for bidirectional operation, secondary LC resonant tank components are usually designed to equal the primary LC components after reflection. This conventional design method is regarded as the symmetric design. It is used in applications where wide voltage regulation is not required, such as CLLC dc transformers. However, for bidirectional battery charger applications, the battery has a wide voltage range variation, and gain requirements during charging and discharging are different. These asymmetric characteristics could lead to undesirable large switching frequency range if a conventional symmetric CLLC design is employed. To address this issue, a detailed asymmetric parameters methodology (APM) is proposed in this article. It can design gain curves for charging and discharging modes separately. This enables overlapping of the switching frequency range for both modes, thereby reducing the bidirectional frequency range variation. It brings lower switching loss caused by excessive high frequency, and relieve the extra conduction loss and current stress of power switches as well. Finally, a detailed analysis of the proposed APM is provided and validated with simulations and experiments.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Response surface methodology: Process and product optimization using designed experiments
Draper, N. R. (1997) · Journal of Statistical Planning and Inference · doi:10.1016/s0378-3758(97)81631-x · Cited by 1,344
Design and Analysis of Experiments
Amidan, B., Dean, A., & Voss, D. (2000) · Technometrics · doi:10.2307/1271085 · Cited by 1,158
Jung, J.-H., Kim, H.-S., Ryu, M.-H., & Baek, J.-W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2213346 · Cited by 621 · cited 4×
“The CLLC resonant tank and high-frequency transformer are in the middle of the two full bridges, and there are six parameters to be designed, which are resonant inductors Lr1 and Lr2, resonant capacitors Cr1 and Cr2, magnetizing inductance Lm, and transformer ratio n. Due to the proposed asymmetric design method, reso…”
MethodInfluentialDesign of Bidirectional DC–DC Resonant Converter for Vehicle-to-Grid (V2G) Applications
Zahid, Z. U., Dalala, Z. M., Chen, R., Chen, B., & Lai, J.-S. (2015) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2015.2476035 · Cited by 359 · cited 1×
“Although capacitors ratio has been adopted for monotonic gain curves [24], detailed asymmetric design methodology, the relationship among coupled parameters, and accurate switching frequency models are lacking in the literature.”
BackgroundA High-Efficiency High-Density Wide-Bandgap Device-Based Bidirectional On-Board Charger
Li, B., Li, Q., Lee, F. C., Liu, Z., & Yang, Y. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2845846 · Cited by 259 · cited 1×
“topology is proposed to improve efficiency [4]–[8], where the power factor correction (PFC) is adopted in the first stage to regulate dc link-voltage for the wide output voltage variation.”
BackgroundHigh-Efficiency Isolated Bidirectional AC–DC Converter for a DC Distribution System
Kim, H.-S., Ryu, M.-H., Baek, J.-W., & Jung, J.-H. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2213347 · Cited by 229
Switching Power Supplies A - Z
(2012) · Elsevier eBooks · doi:10.1016/c2010-0-68564-6 · Cited by 215 · cited 1×
“Moreover, since the minimum switching frequency is higher, the size of the transformer can be smaller [25].”
BackgroundXue, F., Yu, R., & Huang, A. Q. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2686307 · Cited by 199 · cited 1×
“, chargers for energy storage systems in dc microgrid [9].”
BackgroundBi-Directional CLLC Converter With Synchronous Rectification for Plug-In Electric Vehicles
Zou, S., Lu, J., Mallik, A., & Khaligh, A. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2773430 · Cited by 185 · cited 2×
“To further improve efficiency, synchronous rectification (SR) control is introduced [15], [16].”
BackgroundA Novel Three-Level CLLC Resonant DC–DC Converter for Bidirectional EV Charger in DC Microgrids
Xuan, Y., Yang, X., Chen, W., Liu, T., & Hao, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2972446 · Cited by 156 · cited 2×
“3033982 to expand the output voltage range and reduce the voltage stress [1].”
Background
Cited by
Wang, J., Wang, B., Zhang, L., Wang, J., Shchurov, N. I., & Malozyomov, B. V. (2022) · Green Energy and Intelligent Transportation · doi:10.1016/j.geits.2022.100010 · Cited by 153
Mudiyanselage, G. A., Keshmiri, N., & Emadi, A. (2023) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2023.3331180 · Cited by 104
Lyu, D., Soeiro, T. B., & Bauer, P. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3176826 · Cited by 103
Zhou, K., Wu, Y., Wu, X., Sun, Y., Teng, D., & Liu, Y. (2023) · Electronics · doi:10.3390/electronics12071581 · Cited by 82
Aarninkhof, B. O., Lyu, D., Soeiro, T. B., & Bauer, P. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3279211 · Cited by 82
“…output voltage range has been achieved [5], [6], [7], [8], [9], [10], [11], [13], [14], [27], [28], [29], [30], [31], [32], [33], [34], [35], [36], [37], [38], [39], [40], [41], [42], [43], [44], [45], [46], [47], [48], [49], [50], [51], [52], [53], [54], [55], [56], [57], [58], [59], [60], [61].”
InfluentialZhao, L., Pei, Y., Wang, L., Pei, L., Cao, W., & Gan, Y. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3170101 · Cited by 81
“The required operating frequency range would be flagrant large if symmetrical CLLC is employed to achieve the bidirectional gain requirements of battery application, which seriously affects the performance of the converter [24].”
BackgroundMethodLin, F., Zhang, X., & Li, X. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3059852 · Cited by 75
“The typically adopted resonant tanks include: LC, LLC [7], asymmetric CLLC [8], and symmetric CLLC [9].”
BackgroundUnified Modeling, Analysis, and Design of Isolated Bidirectional CLLC Resonant DC–DC Converters
Li, X., Huang, J. F., Ma, Y., Wang, X., Yang, J., & Wu, X. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3145817 · Cited by 74
Tong, Y., Salhi, I., Wang, Q., Lu, G., & Wu, S. (2025) · Energies · doi:10.3390/en18092312 · Cited by 60
“[ 95,96] propose an isolated bidirectional DC-DC converter designed with a voltage-fed half-bridge topology on the transformer’s primary side and a full-bridge topology on the secondary side.”
Application-Oriented Review of the LLC-Based Resonant Converters
Shahsevani, J., & Beiranvand, R. (2024) · IEEE Access · doi:10.1109/access.2024.3386430 · Cited by 56
“In [155], the converter incorporates an LLC resonant network only in the forward conduction mode, Furthermore, full-bridge bidirectional LLC-based resonant converters have been explored in [157], [158], [159], and [160].”
BackgroundGeneralized State-Plane Analysis of Bidirectional CLLC Resonant Converter
Rezayati, M., Tahami, F., Schanen, J., & Sarrazin, B. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3131413 · Cited by 50
A New Soft-Switched High Step-Up Trans-Inverse DC/DC Converter Based on Built-In Transformer
Hasanpour, S., Siwakoti, Y. P., & Blaabjerg, F. (2023) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2023.3275651 · Cited by 47
“Moreover, in [31] and [32] two new type of BIT-based DC-DC converter are presented.”
BackgroundChen, H., Sun, K., Shi, H., Ha, J.-I., & Lee, S. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3108622 · Cited by 43
A Two-Stage DC-DC Isolated Converter for Battery-Charging Applications
Zanatta, N., Caldognetto, T., Biadene, D., Spiazzi, G., & Mattavelli, P. (2023) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2023.3271227 · Cited by 43
A Constant Current Control Method With Improved Dynamic Performance for CLLC Converters
Chen, H., Sun, K., Lu, L., Wang, S., & Ouyang, M. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3108631 · Cited by 40
“In [9], an asymmetric parameters methodology is proposed for CLLC converters to narrow the switching frequency range”
BackgroundMethodWei, R., Ding, L., Liu, R., & Li, Y. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3251284 · Cited by 37
“To unify the characteristics in charging and discharging mode, secondary-side resonant parameters are designed to match the value of primary-side parameters after reflection [17].”
BackgroundResultTuluhong, A., Xu, Z., Chang, Q., & Song, T. (2025) · Electronics · doi:10.3390/electronics14020389 · Cited by 35
Ji, L., Zhang, M., Qian, B., & Sun, H. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3211253 · Cited by 33
Design and Modeling of CLLC Converter for Bidirectional on-Board Charger
Zhang, X., Tang, W., Liu, H., Guan, Y., Wang, Y., Zheng, B., Shao, J., & Xu, D. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3281300 · Cited by 33
A Novel Bidirectional Five-Level Multimode CLLC Resonant Converter
Zhang, Z., Jin, T., Xiao, X., Wu, W., & Yuan, Y. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3140902 · Cited by 30
Ansari, S. A., Davidson, J. N., & Foster, M. P. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3252525 · Cited by 30
“In [16], the benefits of asymmetric parameters are discussed in detail and they are again summarised in Fig.”
BackgroundMethodInfluentialImproved Triple-Phase-Shift Modulation for Bidirectional CLLC Converters
Meinagh, F. A. A., Min, J., Ordonez, M., Craciun, M., & Botting, C. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3256968 · Cited by 30
“The resonant tank design can be both symmetrical and asymmetrical [4].”
BackgroundSelf-citationAn H5-Bridge-Based Laddered $CLLC$ DCX With Variable DC Link for PEV Charging Applications
Zhou, M., Shu, D., & Wang, H. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3123179 · Cited by 29
“In [23], an asymmetric parameter CLLC resonant converter is proposed to adapt to a wide battery voltage range.”
BackgroundUnified Bidirectional Resonant Frequency Tracking for CLLC Converters
Min, J., & Ordonez, M. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3131226 · Cited by 29
“These parameter deviations may cause the actual CLLC resonant tank to be asymmetric from symmetric design [11], [12], thereby leading to the resonant frequencies of the CLLC converter to drift from the designed values in forward and backward operations.”
BackgroundSelf-citationZhu, H., Hu, S., Tahir, M., Bai, Y., & Wu, X. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3329028 · Cited by 29
“Therefore, compact OBC design with high power density and efficiency is the research community’s that focus nowadays [4], [5], [6], [7], [8], [9], [10].”
BackgroundJo, C.-H., Li, G., & Kim, D.-H. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3330492 · Cited by 28
“…has a ZVS condition different from that of LLC resonant converters at f r 1 owing to L 2 and C 2 on the secondary side; however, the conventional CLLC design methods consider only f r 2 as the main operating point without considering f r 1 similar to the LLC resonant converter [9], [24], [25].”
BackgroundMethodInfluentialYang, Y., Li, H., Wu, C., Xu, J., Bi, Y., Zhao, T., & Wang, Y. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3170310 · Cited by 26
“Moreover, CLLC comprises five resonant components, which increase the complexity of the circuit design [16].”
BackgroundSami, I., Alhosaini, W., Khan, D., & Ahmed, E. M. (2024) · World Electric Vehicle Journal · doi:10.3390/wevj15080348 · Cited by 26
Performance of bidirectional ON-Board Charger in Electric Vehicle: A review
Sethuraman, R., & Mageshvaran, R. (2024) · e-Prime - Advances in Electrical Engineering Electronics and Energy · doi:10.1016/j.prime.2024.100613 · Cited by 24
Parasitic Component Small-Signal Modeling and Control of a Practical CLLC Resonant Converter
Chandwani, A., & Mallik, A. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3211158 · Cited by 23
“ADHERING to the inevitable demand for bidirectional power transfer capabilities in addition to high power density, wide soft switching characteristics and wide operating voltage gain range in the field of electric vehicle (EV) charging [1], [2], [3], uninterrupted power supplies (UPSs) [4], more-electric aircrafts (ME…”
BackgroundA Full-Iteration Optimal Design Methodology of CLLC Converter With Minimized RMS Current
Luo, T., Luo, Q., Li, J., Yuan, X., Yan, Y., Yin, M., Sun, P., & Du, X. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3415509 · Cited by 23
“Due to similar application backgrounds and voltage ranges, the work in [12] and [17] were selected from Table VI for comparative experiments as OMA-based and FHA-based design method, respectively.”
MethodA Systematic Literature Review on AC Microgrids
Gomez-Redondo, M., Rivera, M. E., Muñoz, J., & Wheeler, P. W. (2024) · Designs · doi:10.3390/designs8040077 · Cited by 22
Jia, P., Guo, T., Zhu, X., & Shao, T. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3225471 · Cited by 22
“An asymmetrical parameter design method is proposed in [32] to deal with the application of different bidirectional voltage gain range.”
MethodSynchronous Rectification Strategy of CLLC Resonant Converter Based on Accurate Time-Domain Model
Wang, Y., Wang, F., Zhuo, F., Tian, J., Yu, K., & Song, R. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3329155 · Cited by 21
“The V2G application means that power can be transmitted in both directions between EV batteries and grids [1], [2].”
BackgroundSun, K., Chen, H., Lu, L., Zhang, K., Wang, L., & Qin, Y. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3276908 · Cited by 20
Design and Analysis of Reconfigurable Resonant Converter With Ultrawide Output Voltage Range
Qazi, S., Venugopal, P., Watson, A. J., Wheeler, P. W., & Soeiro, T. B. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3365391 · Cited by 20
“Employing phase shifts for efficiency improvement is further explored in CLLC converters where the presence of multiple active bridges allows for a more complex control scheme involving multiple phase shifts [20], [21], [22], [23], [24], [25], [26].”
BackgroundLi, Z., Zhang, S., Chen, D., Sun, P., He, Y., Luo, Q., Liu, J., & Wei, Y. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3437251 · Cited by 20
Chen, R., Lu, R., Bao, X., Li, C., Li, W., & He, X. (2022) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2022.3230399 · Cited by 17
“To further clarify the relationships among the resonant components, several parameters are used [16], [17], [18], [19].”
MethodCascaded Half-Bridge-Based Bidirectional Multilevel Bridgeless PFC With Multioutput Ports
Min, J., & Ordonez, M. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3308812 · Cited by 17
“Taking the bidirectional CLLC dc/dc converter [23], [24] as an example, the required leakage inductance on the secondary side is generally designed as n 2 trans smaller than the primary side leakage inductance [25].”
MethodSelf-citationA Lightweight Artificial Neural Network Start-Up Controller for CLLC Resonant Converters
Xiao, Z., Li, X., & Tang, Y. K. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3436847 · Cited by 17
“T HE CLLC resonant converters are widely employed across numerous sectors, including modern data centers [1], dc transformers [2], battery chargers [3], and energy storage systems [4], owing to their intrinsic zero voltage switching (ZVS) feature, expansive voltage regulation range, excellent load…”
BackgroundCheng, Z., He, L., & Zhou, H. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3491974 · Cited by 16
“Consequently, much work on the relevant characteristics and parameter design of CLLC resonant converters has been concerned [18], [19], [20].”
A Time-Domain Optimization Design Methodology for CLLC Resonant Converter
Wang, L., Luo, Q., & Luo, T. (2021) · IEEE International Power Electronics and Application Symposium (PEAS) · doi:10.1109/peas53589.2021.9628701 · Cited by 14
Steady-State Model-Derived Multivariable Loss Optimization for Triple Active C³L³ Resonant Converter
Chandwani, A., Mallik, A., & Akturk, A. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3266744 · Cited by 14
Hongjun, W., Cheng, C., & Xie, S. (2024) · IEEE Access · doi:10.1109/access.2024.3371880 · Cited by 14
“From Table 3, it is not hard to see that the modified CLLC proposed in this paper, no need the complex parameter design method as [17] and [19], the mixed operation of multi-control-strategies in [23], the complex voltage unfold circuit with a large number of MOSFETs as [25] and [27], and the…”
MethodDynamic Characteristic Improvement of Battery Charger for PMDs Using a Model Predictive Control
Moon, G., & Bak, Y. (2024) · IEEE Access · doi:10.1109/access.2024.3366523 · Cited by 13
“In general, individual battery chargers according to the type of PMDs are used to charge the battery of PMDs with a single rated voltage [14], [15], [16].”
BackgroundEmamalipour, R., Derakhshan, S., & Lam, J. C. W. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3221270 · Cited by 13
“Among the existing topologies, LLC and CLLC resonant converters are the most promising topologies due to their soft-switching feature [4], [5], [6].”
BackgroundAn EV SRM Drive and Its Interconnected Operations Integrated into Grid, Microgrid, and Vehicle
Gu, W.-K., Yang, C.-W., & Liaw, C. M. (2024) · Applied Sciences · doi:10.3390/app14073032 · Cited by 12
Design Method of Totem-Pole PFC and CLLC Resonant Converter Based on SiC MOSFET
Zhu, H., Hu, S., Fujishima, N., & Onishi, Y. (2021) · International Conference on Power and Renewable Energy (ICPRE) · doi:10.1109/icpre52634.2021.9635188 · Cited by 11
Wang, Q., Ye, M., Wei, M., Lian, G., & Li, Y. (2023) · Energy · doi:10.1016/j.energy.2023.127029 · Cited by 11
Wang, Y., Wang, F., Zhuo, F., Yu, K., Tian, J., & Zhang, X. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3467999 · Cited by 10
Bartecka, M., Kłos, M., & Paska, J. (2023) · Energies · doi:10.3390/en17010055 · Cited by 10
“In [13], a design methodology for an asymmetrical resonant tank is presented based on statistical design of experiments (DoE).”
MethodAn Adaptive Current-Limit Soft Start Method for Asymmetric CLLC Resonant Converter
Xiong, L., Song, J., & Gao, Y. (2024) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2024.3401731 · Cited by 10
Vipin, V. N., & Mohan, N. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3538605 · Cited by 10
“Further, the phenomenon of the invariant resonant frequency can be taken advantage of, in designing a new power converter like the CLLLC [38], where the converter gain varies depending on the switching frequency.”
Wang, L., Luo, W., & Huang, D. (2022) · Electronics · doi:10.3390/electronics11182874 · Cited by 10
Jo, C.-H., & Kim, D.-H. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3632516 · Cited by 9
“In summary, existing resonant converters suffer from limited bidirectional operation [2], [7], [8], [10], [11], [12], a restricted output-voltage range [5], [6], [9], or operation below and above the resonant frequency [1], [2], [3], [4], [10], [11], [12].”
A Rotary Wireless Power Transfer Topology with Constant Voltage Output for Oil and Gas Well
Ji, L., Zhang, M., Ma, J., & Qian, B. (2022) · International Conference on Power Energy Systems and Applications (ICoPESA) · doi:10.1109/icopesa54515.2022.9754436 · Cited by 9
Modelling a five‐level LLC resonant converter for bidirectional battery application
Alatai, S., Salem, M., Delgado, M. T., Ishak, D., & Kamarol, M. (2024) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.3935 · Cited by 9
“32,33 The analysis showed that the resonant tank added had significantly amplified not only the size but also the cost of the converter even though it preserved the soft switching properties in two-way operation.”
BackgroundExtended Phase Shift Control of a Novel Bidirectional DC–DC Converter With Direct Power Transfer
Goudarzitaemeh, S., & Pahlevani, M. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3439098 · Cited by 9
“They offer high gain through their resonant tank and are known for higher efficiency and lower circulating current [7].”
BackgroundHamdi, R., Torkaman, H., & Amraei, A. (2024) · doi:10.1109/icemd64575.2024.10963408 · Cited by 9
“To solve this problem, a precise method of designing the parameters asymmetrically is proposed in [16].”
An Inner Phase Shift Control Scheme for the CLLC Converter
Chen, H., Sun, K., Shi, H., Wang, L., & Zhang, K. (2022) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec-himeji2022-ecce53331.2022.9806954 · Cited by 9
“In order to narrow the switching frequency range, an asymmetric parameter design method is proposed for the CLLC converter [8].”
Li, W., Li, Y., Zhao, J., Xu, J., Gong, L., & Wang, Y. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3578341 · Cited by 8
“The mainstream OBCs available today typically use a two-stage architecture [3], [4], consisting of a power factor correction (PFC) rectification circuit [5], [6] and an isolated dc-dc converter [7], [8], [9], with these two stages connected by a large electrolytic capacitor.”
Backward Step-Up Control Strategy for Bidirectional LLC Resonant Converter
Niu, J., Wu, X., Wang, Y., Jing, L., Zhang, W., & Tong, Y. (2022) · Energies · doi:10.3390/en15124471 · Cited by 8
Chandwani, A., Mallik, A., & Akturk, A. (2023) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2023.3236986 · Cited by 8
“Referring to the application of auxiliary charging systems corresponding to (400-600 V) to (24-28 V) conversion, a turns ratio (n) of 22:1 is selected based on the trade-offs between the core loss and winding loss, to adhere to the unity nominal gain requirement of the CLLC converter resulting in efficient voltage reg…”
BackgroundMethodLiu, X., Wu, X., & Wang, H. (2023) · Electrical Engineering · doi:10.1007/s00202-023-01745-2 · Cited by 7
“In order to improve the width of the voltage regulation range based on the parameters symmetrical CLLC resonant converter, the design idea of the asymmetric parameter in the primary and secondary side of the converter is proposed [11].”
MethodReview of Analysis Methods and Control Technologies for CLLC Resonant Converters
Sun, K., Zhang, K., Chen, H., Wang, L., & Liu, Z. (2025) · Chinese Journal of Electrical Engineering · doi:10.23919/cjee.2025.000131 · Cited by 7
Bidirectional push–pull/H‐bridge converter for low‐voltage energy storage system
Oh, Y., Kwon, O., & Kwon, J. (2023) · IET Power Electronics · doi:10.1049/pel2.12586 · Cited by 7
Chandwani, A., & Mallik, A. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3241135 · Cited by 7
“In that context, bidirectional CLLC resonant converter topology has proved to provide various advantages, such as reduced losses due to soft switching in the primary bridge [4] and synchronous rectification (SR) in the secondary bridge [5], and no-load voltage regulation and wider gain range over narrow frequency modu…”
BackgroundTwo-Step Robust Design of LLC Converter With Corner Judgment and Greedy Algorithm
Wang, X., Du, G., Wu, M., Song, Q., & Chen, Y. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3139049 · Cited by 7
Soft-Morphing: Unlocking the Potential of CLLC Converters for Ultrawide Range Applications
Xiao, Z., Deng, F., Yao, Z., & Tang, Y. K. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3480909 · Cited by 6
Design and Analysis of a High-Efficiency Resonant Converter for EV Battery Charger
Erdoğan, B., Tan, A., Savrun, M. M., Cuma, M. U., & Tümay, M. (2023) · Balkan Journal of Electrical and Computer Engineering · doi:10.17694/bajece.1013720 · Cited by 6
“This drawback has been able to eliminate by using a symmetric resonant tank structure such as CLLLC [23-26].”
BackgroundInfluentialGoto, T., Pham, T.-T., Nguyen, N.-D., Yukita, K., & Nguyen, D. (2024) · Electronics · doi:10.3390/electronics13132527 · Cited by 6
Power Loss Minimization of CLLC Resonant Converters via Time Domain Analysis
Xiao, Z., He, Z., Deng, F., & Tang, Y. K. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362154 · Cited by 5
DAB-based Energy Storage System with Flexible Voltage Configuration and Extended Power Capability
Serban, E., Pondiche, C., & Ordonez, M. (2023) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43580.2023.10131589 · Cited by 5
“CLLC resonant converters in bidirectional power flow operation have been investigated to address challenges related to resonant frequency variation, and design selection of the resonant components for wider voltage range [7] and high efficiency applications [8].”
BackgroundSelf-citationShahsevani, J., & Beiranvand, R. (2023) · doi:10.1109/icee59167.2023.10334783 · Cited by 5
“[19] and [18] suffer from transformer issues and return current under the light-load conditions, too.”
BackgroundBidirectional Asymmetric CLLLC Resonant DC-DC Converter for Onboard Electric Vehicle Chargers
Sharma, A., Cardoza, A. D., Veeramraju, K. J. P., Oboreh-Snapps, O., & Kimball, J. W. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362332 · Cited by 5
“On the contrary, an asymmetric CLLLC resonant tank offers the flexibility to select different L and C on the two sides of the transformer [12], which gives the opportunity to relax the requirement for a wide switching frequency bandwidth [13].”
BackgroundBidirectional CLLC Resonant Converter for EV Battery Charging Application
Badiger, S. I., Kalligudd, S., & Raju, A. B. (2024) · International Conference on Innovation and Novelty in Engineering and Technology (INNOVA) · doi:10.1109/innova63080.2024.10846996 · Cited by 5
“The CLLC-RC has a distinctive feature of bidirectional power flow operation during both charging mode and discharging to the grid in V2G applications, as shown by [7].”
Model Analysis and Design of the Control Strategy for the Bidirectional Resonant DAB Converter
Jia, P., Zhang, Y., Liu, M., & Xing, Y. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3543718 · Cited by 5
“Another LC resonant branch can be set in the secondary side to form a CLLC resonant tank, which can also realize the step-up function in any direction [14], [15], [16], [17], [18], [19], [20].”
Deep Learning-Based Predictive Control of Vehicle-to-Grid Onboard Charger Back Stage Models
Zhang, Y., Xue, W., Li, S., Kang, Y., Zhu, J., & Dong, H. (2025) · IEEE Access · doi:10.1109/access.2025.3606020 · Cited by 4
“…MPC heavily relies on the accuracy of the predictive model, and multi-step prediction and online optimization typically require significant computational resources, posing a key challenge for on-board chargers with high switching frequencies and limited computational capacity [27], [28].”
Aghdam, M. R. H., & Torkaman, H. (2025) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2025.3621412 · Cited by 4
Takarli, R. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.120810 · Cited by 4
Bloor, J., Kamel, T., Fear, S., & Durndell, L. J. (2026) · EcoEnergy · doi:10.1002/ece2.70068 · Cited by 4
Xie, W., Shi, M., He, Y., Zhang, C., & Liu, R. (2024) · Energies · doi:10.3390/en17184630 · Cited by 4
Lai, L. F., Zhang, B., & Lin, J. (2024) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2024.3481664 · Cited by 4
“In [32], a robust design scheme considering parameter variations is proposed to keep good power and voltage regulation ability of the open-loop controlled core transformer.”
Design and Modeling of CLLC Converter for Bidirectional On-Board Charger
Zheng, B., Shao, J., Gu, J., Liu, H., Zhang, X., & Xu, D. (2022) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itecasia-pacific56316.2022.9942145 · Cited by 4
“PFM can achieve full-range soft-switching, but the switching frequency will be very high under extremely light load for battery charging, which brings more losses (switching losses, reactive power losses, rectification losses) and more influence of parasitic parameters [8].”
BackgroundOptimal Switching Pattern Control of the CLLC Resonant Converters in Dynamic Processes
Xiao, Z., Wu, J., He, Z., Yao, Z., & Tang, Y. K. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3457899 · Cited by 4
“…find extensive application in various fields such as data centers [1], [2], [3], dc transformers [4], [5], [6], battery chargers [7], [8], [9], [10], and energy storage systems [11], [12], [13], attributed to their bidirectional power flow capability, inherent zero voltage switching (ZVS)…”
BackgroundJo, C.-H., Kim, S., Choe, M.-Y., Kang, S.-J., & Kim, D.-H. (2023) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2023-ecceasia54778.2023.10213586 · Cited by 4
“Motivated by these problems, [11] presented a detailed asymmetric parameter methodology for a bidirectional CLLC resonant converter, which has a narrower switching frequency range and more overlap in charge and discharge modes than conventional symmetric CLLC resonant converters.”
BackgroundMethodWide Output Voltage Range Isolated Buck-Boost PFC Converter with Reconfigurable Rectifier
Verbytskyi, I. V., Nadeem, M. M., Blinov, A., Chub, A., & Vinnikov, D. (2023) · IEEE International Conference on Compatibility, Power Electronics and Power Engineering · doi:10.1109/cpe-powereng58103.2023.10227389 · Cited by 4
Zhang, X., Lin, F., Ma, H., Zhao, B., & Huang, J. (2023) · Springer eBooks · doi:10.1007/978-981-19-9115-8_7 · Cited by 4
The dual active bridge converter design with artificial intelligence
Lin, F. (2022) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/163850 · Cited by 4
Jiao, L., Li, L., Wang, C., Fang, X., & Zeng, Z. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3538695 · Cited by 3
“In the study by Min and Ordonez [6], an asymmetric parameter methodology was introduced for CLLC converters to narrow the switching frequency range for wide voltage applications.”
Wang, T., Zhao, Q., Ding, H., & Wang, D. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3560232 · Cited by 3
Three-Leg Active Bridge-Based Bidirectional Resonant Converter Using Hybrid Si/SiC Switches
Kim, C.-H., Bai, C., Lee, S., Park, E.-H., & Kim, M. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3396848 · Cited by 3
“To address this problem, an asymmetric CLLC resonant tank design has been proposed in [16] and [17], but the design of a resonant tank becomes complicated.”
BackgroundElectrochemistry-Driven Design of Multiwinding CLLC Resonant Converter
Groon, F., Beiranvand, H., Metschies, D., Schikowski, S., & Liserre, M. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3583480 · Cited by 3
“Since a CLLC converter has a resonant circuit on both sides of the transformer, it can be designed symmetrically [37].”
Bidirectional Resonant Frequency Tracking for CLLC Converters Based On Voltage Falling Edges
Min, J., & Ordonez, M. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9594977 · Cited by 3
“higher-order resonant tanks [17], [18], so the converter has multiple resonant frequencies.”
BackgroundSelf-citationDesign and Analysis of Multi-input CLLC Converter for Charging Application
Rajalakshmi, M., Prashant, K. S., Sivagnanam, G., Bhartia, A., Sultana, W. R., & Chitra, A. (2021) · Innovations in Power and Advanced Computing Technologies (i-PACT) · doi:10.1109/i-pact52855.2021.9696719 · Cited by 3
Valadkhani, S., Mirsalim, M., & Moghani, J. S. (2022) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc53976.2022.9767205 · Cited by 3
Wang, Y., Wang, F., Zhuo, F., Yin, X., Tian, J., & Wang, H. (2022) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec-himeji2022-ecce53331.2022.9807225 · Cited by 3
Babu, G. C., Varma, P. S., Kumar, M. K., Rao, K. V. G., Teerdala, R., & Kanagala, S. (2025) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v16.i3.pp1775-1788 · Cited by 2
Jo, C.-H., & Kim, D.-H. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3626523 · Cited by 2
“However, a critical limitation remains: these asymmetric methods [22], [23], [24], [25] still enforce the resonant constraint ( L 1 C 1 = L 2 C 2 ), which fundamentally limits design freedom.”
InfluentialCascaded Half-bridge Multi-Level Multi-Outputs Bridgeless PFC
Min, J., & Ordonez, M. (2023) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43580.2023.10131332 · Cited by 2
“In contrast, DC link capacitors in each cell of the cascaded H-bridge multilevel rectifier can serve as the input of the DC-DC stage in the ISOP converters [12]–[16], which are suitable for applications like energy storage system with wide voltage range requirements [17], [18].”
BackgroundSelf-citation
Metadata
- Authors
- Min, J., & Ordonez, M.
- Affiliations
- University of British Columbia (CA)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2021-06
- Volume
- 36
- Issue
- 6
- Pages
- 6662-6673
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W3096732586
- Cited by
- 152
- References
- 28
- Citations by year
- 2026: 15 · 2025: 32 · 2024: 37 · 2023: 34 · 2022: 23 · 2021: 11
- FWCI
- 5.84
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Funders
- Natural Sciences and Engineering Research Council of Canada
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Induction Heating and Inverter Technology
- Keywords
- CLLC resonant converter, bidirectional resonant converter, battery charger, switching loss reduction, DC microgrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.