Bidirectional Resonant CLLC Charger for Wide Battery Voltage Range: Asymmetric Parameters Methodology
The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
The CLLC bidirectional resonant converter has significant potential in battery chargers and dc microgrids, due to its bidirectional power transfer capability. To ensure uniform characteristics for bidirectional operation, secondary LC resonant tank components are usually designed to equal the primary LC components after reflection. This conventional design method is regarded as the symmetric design. It is used in applications where wide voltage regulation is not required, such as CLLC dc transformers. However, for bidirectional battery charger applications, the battery has a wide voltage range variation, and gain requirements during charging and discharging are different. These asymmetric characteristics could lead to undesirable large switching frequency range if a conventional symmetric CLLC design is employed. To address this issue, a detailed asymmetric parameters methodology (APM) is proposed in this article. It can design gain curves for charging and discharging modes separately. This enables overlapping of the switching frequency range for both modes, thereby reducing the bidirectional frequency range variation. It brings lower switching loss caused by excessive high frequency, and relieve the extra conduction loss and current stress of power switches as well. Finally, a detailed analysis of the proposed APM is provided and validated with simulations and experiments.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Response surface methodology: Process and product optimization using designed experiments
Draper, N. R. (1997) · Journal of Statistical Planning and Inference · doi:10.1016/s0378-3758(97)81631-x · Cited by 1,344
Design and Analysis of Experiments
Amidan, B., Dean, A., & Voss, D. (2000) · Technometrics · doi:10.2307/1271085 · Cited by 1,158
Jung, J.-H., Kim, H.-S., Ryu, M.-H., & Baek, J.-W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2213346 · Cited by 621 · cited 4×
“The CLLC resonant tank and high-frequency transformer are in the middle of the two full bridges, and there are six parameters to be designed, which are resonant inductors Lr1 and Lr2, resonant capacitors Cr1 and Cr2, magnetizing inductance Lm, and transformer ratio n. Due to the proposed asymmetric design method, reso…”
MethodInfluentialDesign of Bidirectional DC–DC Resonant Converter for Vehicle-to-Grid (V2G) Applications
Zahid, Z. U., Dalala, Z. M., Chen, R., Chen, B., & Lai, J.-S. (2015) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2015.2476035 · Cited by 359 · cited 1×
“Although capacitors ratio has been adopted for monotonic gain curves [24], detailed asymmetric design methodology, the relationship among coupled parameters, and accurate switching frequency models are lacking in the literature.”
BackgroundA High-Efficiency High-Density Wide-Bandgap Device-Based Bidirectional On-Board Charger
Li, B., Li, Q., Lee, F. C., Liu, Z., & Yang, Y. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2845846 · Cited by 259 · cited 1×
“topology is proposed to improve efficiency [4]–[8], where the power factor correction (PFC) is adopted in the first stage to regulate dc link-voltage for the wide output voltage variation.”
BackgroundHigh-Efficiency Isolated Bidirectional AC–DC Converter for a DC Distribution System
Kim, H.-S., Ryu, M.-H., Baek, J.-W., & Jung, J.-H. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2213347 · Cited by 229
Switching Power Supplies A - Z
(2012) · Elsevier eBooks · doi:10.1016/c2010-0-68564-6 · Cited by 215 · cited 1×
“Moreover, since the minimum switching frequency is higher, the size of the transformer can be smaller [25].”
BackgroundXue, F., Yu, R., & Huang, A. Q. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2686307 · Cited by 199 · cited 1×
“, chargers for energy storage systems in dc microgrid [9].”
BackgroundBi-Directional CLLC Converter With Synchronous Rectification for Plug-In Electric Vehicles
Zou, S., Lu, J., Mallik, A., & Khaligh, A. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2773430 · Cited by 185 · cited 2×
“To further improve efficiency, synchronous rectification (SR) control is introduced [15], [16].”
BackgroundA Novel Three-Level CLLC Resonant DC–DC Converter for Bidirectional EV Charger in DC Microgrids
Xuan, Y., Yang, X., Chen, W., Liu, T., & Hao, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2972446 · Cited by 156 · cited 2×
“3033982 to expand the output voltage range and reduce the voltage stress [1].”
Background
Cited by
Items 101–163 of 163
A Precise and Fast BPNN-Based Voltage Gain Model of CLLC Converters in All Operation Conditions
Xiao, Z., Jiang, Y. Y., Yao, Z., & Tang, Y. K. (2023) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon51785.2023.10312473 · Cited by 2
“The CLLC resonant converter has a significant potential in battery chargers [1], energy router [2], and dc microgrid [3] due to its bidirectional power transfer capability, inherent zero voltage switching-on (ZVS-on), high efficiency, and high power density.”
BackgroundHalf Bridge LLC DC-DC Converter for EV Battery Charger
Vibha, K. (2024) · Journal of Propulsion Technology · Cited by 2
Interleaved CLLC Converters with Dual Phase-Shift Modulation
Meinagh, F. A. A., Min, J., & Ordonez, M. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362515 · Cited by 2
“Resonant converters can provide a wide output voltage range, soft-switching, high-power density, and galvanic isolation [1], [2].”
BackgroundSelf-citationBakhshi, A., Moghim, A., & Hojabri, M. (2024) · Energies · doi:10.3390/en17092101 · Cited by 2
Zhang, S., Wu, X., Zhang, Z., & Zhang, X. (2022) · Energies · doi:10.3390/en15145281 · Cited by 1
AI-assisted Peak Efficiency Searching of CLLC Resonant Converters in Step-down Conditions
Xiao, Z., Jiang, Y. Y., Yao, Z., & Tang, Y. K. (2024) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia60879.2024.10567569 · Cited by 1
Wang, L., Chen, H., & Sun, K. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861211 · Cited by 1
Sim, D. H., Lee, J.-A., Jo, H., Kim, C.-L., Yoo, D.-W., & Lee, B. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861131 · Cited by 1
Zhang, Z., Xu, Y. X., Yuan, Y., Lv, T., Li, Y., & Chen, Y. (2025) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2025.3545953 · Cited by 1
Ansari, S. A., Davidson, J. N., & Foster, M. P. (2025) · IET Power Electronics · doi:10.1049/pel2.70014 · Cited by 1
Zhou, X., Luo, H., & Zhou, B. (2025) · IEEE Access · doi:10.1109/access.2025.3561932 · Cited by 1
“In [22] and [23], the resonant parameters of bidirectional converter are determined by the voltage gain curves for bidirectional power flow, which can reduce the conduction losses of the switches.”
Luo, T., Luo, Q., Yuan, X., Dong, S., & Lai, G. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3599974 · Cited by 1
“Since the output current under PFM control increases with the peak resonant current at the same voltage gain, the starting speed can be maximized by controlling the peak resonant current near the limiting value [23].”
Abbasi, F., Min, J., Ordonez, M., & Botting, C. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3611346 · Cited by 1
“…converters are renowned for their wide output voltage range, galvanic isolation, high power density, and soft-switching capabilities, making them ideal for applications such as electric vehicles, telecommunications, uninterruptible power supplies, and renewable energy sources [1], [2], [3], [4].”
Self-citationYuan, Y., & Liu, W. (2025) · IET Electrical Systems in Transportation · doi:10.1049/els2/4960116 · Cited by 1
“However, its main disadvantages include too many passive components on the power path, and large internal circulating current when the voltage gain deviates signi fi cantly from the design point [12, 13].”
Shen, C., Ruan, X., Zhu, R., & Zhao, H. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3634432 · Cited by 1
“Compared with the DAB converter, the CLLC resonant converter features low turn-OFF current, leading to low turn-OFF loss [5].”
Aghdam, M. R. H., & Torkaman, H. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3655173 · Cited by 1
“To overcome these issues, bidirectional dc–dc converters have drawn more attention [1], [2], [3].”
Control Strategy for Bi-Directional CLLC Resonant Converter
Xiaohua, H., Jianwei, M., Taoyong, L., Chen, F., Jiancai, P., & Jing, Z. (2025) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itecasia-pacific63742.2025.11344925 · Cited by 1
“However, when the system voltage gain is small, its higher switching frequency still results in non-negligible switching losses, and when the working frequency deviates significantly from the resonant frequency, the first harmonic approximation (FHA) errors will prominently increase [2] .”
Yeom, J.-W., Jeong, S.-M., Jeong, S.-M., & Lee, I.-O. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3672163 · Cited by 1
“For instance, Min and Ordonez [5]proposedabidirectional CLLC resonantconverteremploying an asymmetric parameter design methodology that optimizes gain characteristics for charging and discharging independently.”
Efficiency-Based CLLC Bidirectional DC-DC Converter Using Copolar Switching
Hsieh, Y.-T., Chen, C., Shieh, W.-Y., Haung, C.-C., Chieng, W.-H., & Chang, E. Y. (2026) · Energies · doi:10.3390/en19081820 · Cited by 1
Wu, H.-J., Phukan, R., McGrew, T., Barbosa, P. M., & Chen, Y.-M. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3714731 · Cited by 1
“…[16], [17] targets hard-switched PWM converters in which switching frequency is decoupled from voltage gain, and prior wide-range CLLC control [11], [12], [18], [19], [20] coordinates timing variables as regulation handles responding to voltage errors at the switching cadence; the proposed…”
InfluentialChen, J., Wu, S., Chiou, G., & Juang, F. (2022) · The Journal of Engineering · doi:10.1049/tje2.12222 · Cited by 1
Wang, Y., Zhang, B., Liu, C., Tian, J., & Wang, F. (2024) · CPSS & IEEE International Symposium on Energy Storage and Conversion (ISESC) · doi:10.1109/isesc63657.2024.10785491 · Cited by 1
Jang, W.-Y., Kim, I., Jung, H., & Park, J.-W. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861092 · Cited by 1
A Time-Domain Model for CLLC DAB Converter Considering Asymmetric Resonant Tank Parameters
Wu, J., Li, Y., Pan, Y., Du, Y., & Sun, X. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3552851 · Cited by 1
“Theinflu-ence of asymmetric resonant tank parameters on the operating characteristics of the CLLC DAB converter based on VFM is analyzed in [7] and [8] by the fundamental harmonic approximation (FHA) method, which have the effect of reducing the switching frequency range to improve the converter’s…”
State-plane analysis and optimization of the CLLC resonant converter for bidirectional EV charger
Rezayati, M. (2023) · theses.fr (ABES) · doi:10.70675/ff83aa99zc80bz4355zabe6z657c2af4a720 · Cited by 1
Hung, T.-C., Lee, T.-S., Huang, K., & Chen, Y.-H. (2022) · Electronics · doi:10.3390/electronics11020254
Sathya, K., & Guruswamy, K. P. (2022) · International Journal of Engineering and Advanced Technology · doi:10.35940/ijeat.e3607.0611522
Huang, J., Huo, P., & He, X. (2023) · Energy Reports · doi:10.1016/j.egyr.2023.04.092
2021 Index IEEE Transactions on Power Electronics Vol. 36
(2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3272454
Huang, J., Wang, Y., Huo, P., & He, X. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362597
State observation control strategy of bidirectional resonant DC/DC converter in building DC system
Li, G., Wang, J., Jin, X., & Xiong, X. (2024) · IET Renewable Power Generation · doi:10.1049/rpg2.12948
Research on Optimal Design of Bidirectional Converter Based on Multiplexing of DAB and CLLC
Li, J., Qian, T., & Guan, W. (2024) · Lecture notes in electrical engineering · doi:10.1007/978-981-97-1068-3_37
An Asymmetrical Multi-mode Bidirectional PWM DC-DC Converter with High Voltage Gain
Liu, W., & Yuan, Y. (2024) · Lecture notes in electrical engineering · doi:10.1007/978-981-97-1428-5_44
Design Methodology of Bidirectional LLC Resonant Converter
Jo, C.-H., Li, G., Xie, J., Ahn, J.-H., & Kim, D.-H. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509085
“Resonant converters (CLLC or LLC) exhibit a broader range of soft switching conditions compared to DAB converters and boast high-efficiency performance by minimizing reactive power [4].”
BackgroundA Streamlined and Intuitive AI-Powered Analysis and Design Tool for Resonant Converters
Xiao, Z., Jiang, Y. Y., Wang, C., & Tang, Y. K. (2024) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia60879.2024.10567061
“Resonant converters are increasingly preferred in a variety of applications, including data centers [1], telecommunications [2], electric vehicles [3], and energy storage systems [4].”
BackgroundA Non-approximated Steady State Model-derived Semiconductor Loss Optimization for Resonant CLLC
Mungekar, S., Mallik, A., & Akturk, A. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10860923
Talebi, S., Sadeghian, S., & Abrishamifar, A. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5137129
Wu, Y., Chen, Y., Zhou, Y., Cheng, X., Zhao, X., & Yang, R. (2024) · International Conference on Intelligent Power and Systems (ICIPS) · doi:10.1109/icips64173.2024.10900124
“In recent years, more articles have studied 2024 4th International Conference on Intelligent Power and Systems (ICIPS) the resonant parameter design [1]-[7] , synchronous rectification, soft start and three-phase current sharing control strategies [8]- [14] of CLLC converter.”
Deep Reinforcement Learning Approach for EV Charger Control Under Load Variation
Park, K., Kim, S., & Lee, Y. (2025) · International Conference on Artificial Intelligence in Information and Communication (ICAIIC) · doi:10.1109/icaiic64266.2025.10920853
Li, Z., Zhang, S., Qu, S. G., Xu, M., Liu, J., & Wei, Y. (2025) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec64805.2025.11116625
Zhang, Y., Jia, P., Liu, M., & Xing, Y. (2025) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) · doi:10.1109/wipda-asia63772.2025.11184074
“In order to reduce the variation range of the switching frequency with a wide voltage range, [4] proposed an asymmetric parameter design method for bidirectional CLLC resonant converter.”
Li, Z., Zhang, S., Qu, S. G., Chen, D., Liu, J., & Wei, Y. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3632871
“There are many different types of resonant tanks for ACLLLC class resonant converters [10], [11], [12], [13], [14], [15], [16], [17], [18], [19], [20], [21], [22].”
InfluentialJang, J., Shin, Y., Kim, J.-W., Yang, D., Kim, H., & Cho, Y. (2025) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce58356.2025.11260169
DAB DC-DC Converter for use in an AC Power Bank
Pacheco, N. M. F. (2022) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · doi:10.34626/e0hp-6b31
Isolated Bidirectional DC-DC Converter and System Level Control for EV Charger
Zhang, J. (. (2023) · Research Repository (Delft University of Technology)
Enhancing Efficiency in Bidirectional CLLC Resonant Converters
Chaturvedi, A., Rajalakshmi, M., & Sultana, W. R. (2026) · Wiley eBooks · doi:10.1002/9781394288342.ch8
Cui, C., Tang, H., Gong, L., Xu, J., Zhang, F., & Wang, Y. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3661742
“The pulse frequency modulation (PFM) is widely applied in CLLC resonant converters [7], [8].”
A topology of single-phase bidirectional converter for Plug-in Electric vehicle application
Kumar, A., Archana, K., Choudhary, D., & Singh, M. (2025) · IEEE International Conference on Green Industrial Electronics and Sustainable Technologies (GIEST) · doi:10.1109/giest66547.2025.11387489
“Specifically, the CLLC resonant converter, known for its high efficiency and consistent voltage gain in both forward and reverse modes of operation, is predominantly utilized and extensively researched [4].”
Chen, Q., Wang, K., Li, Z., Lai, L., Zhu, L., Huang, M., & Yang, Y. (2025) · Asia Conference on Advances in Electrical and Power Engineering (ACEPE) · doi:10.1109/acepe67873.2025.11405614
“Building upon these topologies, the bidirectional asymmetric CLLC converter has been further investigated [6].”
Tung, N. T., Pong, M.-H., & Chiu, H. (2025) · IEEE International Conference on Energy Technologies for Future Grids (ETFG) · doi:10.1109/etfg61999.2025.11401940
“The effect of k 1 and k 2 on gain curve is described more details in [7].”
Mungekar, S., & Mallik, A. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3671167
“The fundamental harmonic approximation (FHA) [11], [12], [13], [14], [15], [16] is commonly used for steady-state analysis by considering only the fundamental voltage and current components, offering reasonable accuracy near resonance.”
Hybrid Frequency-Phase Shift Modulation With Natural Synchronous Rectification for CLLC Converters
Liu, C., Chen, H., Wang, L., Zhang, K., Sun, K., & Junyent‐Ferré, A. (2026) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2026.3674528
“T HE rapid growth of electric vehicles (EVs) is driving the development of vehicle-to-grid (V2G) systems [1], [2], [3].”
A Two-stage Isolated Bidirectional AC-DC-DC Converter with Soft Switching Operation
Takarli, R., Ashtiani, Y. H., Khanahmadi, A., Shahbazi, M., & Afjei, E. S. (2025) · doi:10.1109/icemd68435.2025.11441725 · Cited by 1
“However, APM requires more flexibility in choosing resonant tank components, and the DoE model has high complexity and a limited number of optimized parameters [6].”
Perevalov, Y., Dobroskok, N. A., Stotckaia, A. D., Safonov, I. S., Melnikov, A. S., Parmenov, V. E., Maslennikov, N. V., Lavrinovskiy, V. S., & Migranov, R. M. (2026) · Energies · doi:10.3390/en19102443
Jang, J., & Cho, Y. M. (2026) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec51134.2026.11517160
Lee, J., Chung, E., Ryu, T., & Ha, J.-I. (2026) · IEEE Access · doi:10.1109/access.2026.3698097
“Besides, resonant converters are widely adopted for EV charger applications [3], [4], [5], [6], [7], [8], [9], [10], [11], [12] because they can achieve ZVS over a wide operating range, although they require additional passive components compared with the DAB converter.”
Enhanced Magnetics Utilization and Core Size Reduction in CLLC Converters
Hassan, J., Palanisamy, A., Itoh, J.-I., Lu, D. D.-C., & Siwakoti, Y. P. (2026) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec-nagasaki2026-ec64663.2026.11597116
Fractional‐Order Modeling and Gain Curve Analysis of Full‐Bridge CLLC Resonant Converter
Zhu, X., He, H., Wang, C., & Zhang, B. (2026) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.70602
A Novel Current-Fed CLCL Resonant Bidirectional DC/DC Converter
Li, S., Zhou, Y., Wang, T., Zhu, L., & Weng, J. (2026) · International Conference on Electrical Engineering and Green Energy (CEEGE) · doi:10.1109/ceege70076.2026.11638000
“Based on [18], assuming a half-cycle analysis and neglecting soft-switching transition times, the fundamental RMS expression of the resonant tank input voltage VAB(1) generated by the boost inverter network is given by: where D represents the conduction duty cycle.”
Liu, W., Zhang, Y., Cai, L., Li, T., Deng, F., Yuan, Y., Zhou, Z., & Zeng, H. (2026) · Sensors · doi:10.3390/s26175606
“Typical resonant bidirectional DC–DC converter topologies include the LLC resonant converter [8,9] and the CLLC resonant converter [10].”
Hybrid Energy Storage Systems for Electric Vehicles and Stationary Applications
Fusco, D. (2023) · Archivio Istituzionale della Ricerca - Università degli Studi di Cassino
Lee, J.-A., Sim, D. H., & Lee, B. (2026) · Journal of Electrical Engineering and Technology · doi:10.1007/s42835-026-02942-2
Jun, H., Kong, C., Zhang, H., Ren, Y., & Li, C. (2026) · IEICE Electronics Express · doi:10.1587/elex.23.20260463
Metadata
- Authors
- Min, J., & Ordonez, M.
- Affiliations
- University of British Columbia (CA)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2021-06
- Volume
- 36
- Issue
- 6
- Pages
- 6662-6673
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W3096732586
- Cited by
- 152
- References
- 28
- Citations by year
- 2026: 15 · 2025: 32 · 2024: 37 · 2023: 34 · 2022: 23 · 2021: 11
- FWCI
- 5.84
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Funders
- Natural Sciences and Engineering Research Council of Canada
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Induction Heating and Inverter Technology
- Keywords
- CLLC resonant converter, bidirectional resonant converter, battery charger, switching loss reduction, DC microgrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.