Integrated Wireless Charging Receiver for Electric Vehicles With Dual Inverter Drives
The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Abstract
Wireless/contactless charging of electric vehicles can improve the safety and convenience of the electric vehicle charging process. However, in order to enable wireless charging on an electric vehicle, additional components need to be added to the vehicle, which increase the cost, and weight of the vehicle. Specifically, a wireless receiver coil and power electronics are required to receive the wireless power and charge the battery. This work proposes a new integrated wireless charger, which reuses the existing drivetrain components, such as the traction inverters and the motor, to serve as the receiver-side power electronics for wireless charging. Importantly, this topology limits the high frequency currents entering the traction components, such as the motor, which are susceptible to high frequency losses. The drivetrain can serve to control the charging rate of the batteries, which eliminates the need for transmitter side battery charging control and communication. Experimental validation was done by coupling a 110 kW EV machine and dual-inverter drivetrain to a 6.6 kW wireless transmission system. A peak charging efficiency of 94.3% over a vertical coil distance of 200 mm was achieved.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118 · cited 1×
“I NTEGRATED on-board charging has recently gained significant interest in both academia and industry, due to the potential cost and weight savings in the vehicle [1], [2], [3], [4], [5], [6], [7].”
BackgroundA Comprehensive Review of Wireless Charging Technologies for Electric Vehicles
Ahmad, A., Alam, M. S., & Chabaan, R. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2771619 · Cited by 993 · cited 1×
“Whileconductivechargingisthemostcommoncharging methodusedtodayinmostEVs,inductivewirelesscharging hasalsobeengainingpopularityforitsimprovedconvenience andsafety[12].”
Compensation Topologies of High-Power Wireless Power Transfer Systems
Zhang, W., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2454292 · Cited by 992
Khaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630
Review of Wireless Charging Systems for Autonomous Underwater Vehicles
Teeneti, C. R., Truscott, T. T., Beal, D. N., & Pantic, Z. (2021) · IEEE Journal of Oceanic Engineering · doi:10.1109/joe.2019.2953015 · Cited by 302
An Integral Battery Charger With Power Factor Correction for Electric Scooter
Pellegrino, G., Armando, E., & Guglielmi, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2033187 · Cited by 267
Metwly, M. Y., Abdel-Majeed, M. S., Abdel-Khalik, A. S., Hamdy, R. A., Hamad, M. S., & Ahmed, S. (2020) · IEEE Access · doi:10.1109/access.2020.2992741 · Cited by 229 · cited 1×
“I NTEGRATED on-board charging has recently gained significant interest in both academia and industry, due to the potential cost and weight savings in the vehicle [1], [2], [3], [4], [5], [6], [7].”
BackgroundLi, Z., Song, K., Jiang, J., & Zhu, C. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2793312 · Cited by 148
Subotic, I., Bodo, N., Levi, E., Dumnic, B., Milicevic, D., & Katic, V. (2016) · IET Electric Power Applications · doi:10.1049/iet-epa.2015.0292 · Cited by 141
A Novel Coil With High Misalignment Tolerance for Wireless Power Transfer
Li, Y., Zhao, J., Yang, Q., Liu, L., Ma, J., & Zhang, X. (2019) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2019.2904086 · Cited by 132
Cited by
Ramakrishnan, V., Savio, A. D., Balaji, C., Narayanamoorthi, R., Kotb, H., Elrashidi, A., & Nureldeen, W. (2024) · IEEE Access · doi:10.1109/access.2024.3378303 · Cited by 171
Hybrid Wireless Power Transfer With Self-Resonance Coupler Based on Integrated Coil
Dai, Z., Sun, Y., Gan, Q., et al. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3623618 · Cited by 11
“Highpower-level WPThasalsobeenattemptedforapplications,suchasEVs,rail trains,etc.[7],[8],[9],[10].”
Niu, S., Liu, W., Liu, C., Jia, C., Liserre, M., & Chau, K. T. (2026) · eTransportation · doi:10.1016/j.etran.2026.100547 · Cited by 16
Ramesh, P., Pongiannan, R. K., Demel, L., et al. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.104100 · Cited by 9
Efficient Modulation Strategies to Minimize Switching Losses in Dual-Inverter Systems
Kucera, J., Lipcak, O., & Bauer, J. (2025) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2025.3553933 · Cited by 10
“Furthermore, DI facilitates charging directly from a dc network without additional hardware [23], [24] and enables wireless charging [25].”
Metadata
- Authors
- Semsar, S., Luo, Z., Nie, S., & Lehn, P. W.
- Affiliations
- University of Toronto (CA)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2024-01
- Volume
- 39
- Issue
- 1
- Pages
- 1802-1814
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W4387196974
- Cited by
- 22
- References
- 32
- Citations by year
- 2026: 7 · 2025: 11 · 2024: 4
- FWCI
- 1.63
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Funders
- Natural Sciences and Engineering Research Council of Canada (CRDPJ 513206-17)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Induction Heating and Inverter Technology
- Keywords
- wireless charging, electric vehicles, contactless charging, high-frequency losses, charging efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Integrated Wireless Charging Receiver for Electric Vehicles With Dual Inverter Drives. https://app.cochat.ai/papers/10.1109/tpel.2023.3320664
- The paper
- Semsar, S., Luo, Z., Nie, S., & Lehn, P. W. (2024). Integrated Wireless Charging Receiver for Electric Vehicles With Dual Inverter Drives. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2023.3320664
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.