A Multi-Currents Method for Junction Temperature Separation of Cascode GaN
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Gallium nitride (GaN) power electronics are becoming widely used in power conversion systems due to their high electron mobility. The cascode structure, with a Si metal-oxide-semiconductor field-effect transistor (mosfet) connect in series for gate control, in enhancement mode of GaN has been promoted by manufacturers due to its low price and excellent characteristic. However, the existed junction temperature method can only obtain one temperature value of two chips, rather than each of it caused by cascode structure. This structure therefore leads to different failure modes with thermal coupling between two chips. To better analyze the failure mechanism, it is important to separate the junction temperatures of the internalmosfetand the high-electron mobility transistors (HEMTs). This article proposes a new measurement method which can get the junction temperature of the two chips inside the cascode GaN can be obtained without damaging the device packaging. First, by applying different magnitudes of reverse measurement currents to the GaN power electronics in the cascode, the theoretical formulae are calculated to further derive the calibration curves for the temperature dependent changes of the electrical parameters of the internalmosfetreverse diodes and HEMT devices. By constructing a special timing circuit and combining it with actual transient thermal impedance test (just as an example of a reliability test), the junction temperature of the cascode internal GaN chips can be calculated under real operating conditions. Detailed experiments verify the feasibility of the method and the accuracy of the junction temperature calculation (the temperature deviation does not exceed 5 K).
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Even cascode GaN devices-which stack a GaN HEMT and a Si MOSFET to reduce parasitics-introduce a complex thermal path that can elevate junction temperature and must be managed carefully [22,23].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [23]
In the citing paper
“TSEP-based monitoring can separate the temperatures of the internal HEMT and the Si MOSFET in cascode GaN via reverse-current analysis [23], while dI / dt and I gp are commonly used in SiC MOSFETs [64,71].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [23]
Citations
Cites
Stability, Reliability, and Robustness of GaN Power Devices: A Review
Kozak, J. P., Zhang, R., Porter, M., Song, Q., Liu, J., Wang, B., Wang, R., Saito, W., & Zhang, Y. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3266365 · Cited by 441 · cited 1×
“G ALLIUM nitride (GaN) power electronics, a third-generation wide bandgap semiconductor, is widely used in a variety of applications due to its high electron mobility [1] in recent years.”
BackgroundAnalytical Loss Model of High Voltage GaN HEMT in Cascode Configuration
Huang, X., Li, Q., Liu, Z., & Lee, F. C. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2267804 · Cited by 292
Short-Circuit Study in Medium-Voltage GaN Cascodes, p-GaN HEMTs, and GaN MISHEMTs
Fernandez, M., Perpina, X., Roig-Guitart, J., Vellvehi, M., Bauwens, F., Tack, M., & Jorda, X. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2719599 · Cited by 97
Chen, J., Deng, E., Xie, L., Ying, X., & Huang, Y. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2020.2969727 · Cited by 67 · cited 1×
“The calibration system [18] means that the relationship between the relevant electrical parameters and temperature can be obtained by placing the device in a thermostat to measure the electrical parameters at different temperatures before experimentation.”
BackgroundSelf-citationState-of-the-art of the bond wire failure mechanism and power cycling lifetime in power electronics
Xie, L., Deng, E., Yang, S., Zhang, Y., Zhong, Y., Wang, Y., & Huang, Y. (2023) · Microelectronics Reliability · doi:10.1016/j.microrel.2023.115060 · Cited by 55 · cited 1×
“This is not possible for real application and changes the failure mechanism in reliability tests [16], [17].”
BackgroundSelf-citationPower cycling reliability results of GaN HEMT devices
Franke, J., Zeng, G., Winkler, T., & Lutz, J. (2018) · 2018 IEEE 30th International Symposium on Power Semiconductor Devices and ICs (ISPSD) · doi:10.1109/ispsd.2018.8393704 · Cited by 50 · cited 1×
“For GaN power electronics, existing electrical parameters for junction temperature measurement [10] include on-resistance [11], gate threshold voltage [12], turn-OFF delay time [13], and thermal resistance, and so on.”
BackgroundInfluence of Humidity on the Power Cycling Lifetime of SiC MOSFETs
Wang, Y., Deng, E., Wu, L., Yan, Y., Zhao, Y., & Huang, Y. (2022) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2022.3223957 · Cited by 34
Self-citationEvaluation of high voltage cascode GaN HEMTs in parallel operation
Li, H., Zhang, X., Wen, L., Brothers, J. A., Yao, C., Zhu, K. M., Wang, J., Liu, L., Xu, J., & Puukko, J. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7467991 · Cited by 26 · cited 1×
“Its excellent characteristics [2] are attributed to the internal structure of AlGaN/GaN, which forms a heterojunction with strong piezoelectric and spontaneous polarization effects, leading to the formation of a high-electron-mobility [3], [4] and high-density two-dimensional electron gas [5], [7].”
BackgroundInfluence of Thermal Coupling on Lifetime Under Power Cycling Test
Zhao, Y., Deng, E., Pan, M., Zhang, Y., & Huang, Y. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3182146 · Cited by 26
Self-citation650-V Normally-OFF GaN/SiC Cascode Device for Power Switching Applications
Zhong, K., Wang, Y., Lyu, G., Wei, J., Sun, J., & Chen, K. J. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3114697 · Cited by 25
Self-citation
Research works printed but not linked: 3
- Matteo, 2018, Power GaN Devices: Materials, Applications and Reliability[M]
- Erping, 2023, Challenges and analyses of power cycle testing techniques for power devices, Chin. J. Elect. Eng., 43, 5132
- Yushan, 2021, Thermal coupling mechanism of IGBT full-bridge modules (6 in 1) for electric vehicles, Chin. J. Elect. Eng., 41, 3528
Cited by
Han, G., Kim, J., Park, S., & Bae, W. (2025) · Electronics · doi:10.3390/electronics14214193 · Cited by 34
“Even cascode GaN devices—which stack a GaN HEMT and a Si MOSFET to reduce parasitics—introduce a complex thermal path that can elevate junction temperature and must be managed carefully [22,23]. showing the AlGaN/GaN heterostructure and key device regions [1].”
Overview of GaN-HEMT Junction Temperature Extraction Based on Device Structural Properties
Zhang, J., Jiang, Y., Qu, Z., Luo, N., Zhang, X., Rahman, S. U., & Wen, H. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3681930 · Cited by 2
“For multichip junction temperature extraction, Wu et al. [84] applied multiple small reverse measurement currents to the cascode device by using the current-dependent linearity of the diode’s equivalent resistance.”
Rahman, S. U., Wen, H., Khan, A., Umar, M., & Noor, N. (2026) · IEEE Access · doi:10.1109/access.2026.3697714 · Cited by 1
“The monotonic increase of I G , leak with junction temperature highlights its suitability as a gate-related temperature-sensitive electrical parameter, directly reflecting the thermal state of the gate junction relevant to gate degradation and long-term reliability. configuration [71].”
Huang, Y., Zhu, X., Zhang, D., Hao, Y., Li, A., & Wang, Y. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3650256
“The error between the calculated result and the actual calibration curve is small and the accuracy is high [19].”
Self-citation
Metadata
- Authors
- Wu, L., Deng, E., Wang, Y., Xu, S., Hua, W., Yang, S., & Ding, L.
- Affiliations
- Hefei University of Technology (CN)
- North China Electric Power University (CN)
- China CEPREI Laboratory, Guangzhou, China
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2024-12
- Volume
- 39
- Issue
- 12
- Pages
- 15567-15575
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W4400729036
- Cited by
- 3
- References
- 21
- Citations by year
- 2026: 2 · 2025: 1
- FWCI
- 0.43
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Funders
- National Natural Science Foundation of China (52007061)
- Topics
- Physical Sciences › Physics and Astronomy › Condensed Matter Physics › GaN-based semiconductor devices and materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Power Amplifier Design
- Keywords
- GaN power electronics, HEMT, transient thermal impedance, thermal coupling, device reliability, failure mechanism analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Multi-Currents Method for Junction Temperature Separation of Cascode GaN. https://app.cochat.ai/papers/10.1109/tpel.2024.3424893
- The paper
- Wu, L., Deng, E., Wang, Y., Xu, S., Hua, W., Yang, S., & Ding, L. (2024). A Multi-Currents Method for Junction Temperature Separation of Cascode GaN. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2024.3424893
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.