Power cycling reliability results of GaN HEMT devices
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The GaN HEMT is a novel wide bandgap device which could improve the overall efficiency and at the same time shrink the system size. In order to verify the reliability of this promising semiconductor device, new measurement and testing methods have to be developed. In this work, as a general basis for performing reliability tests junction temperature measurement methods for GaN HEMT were investigated. By using suitable temperature measurement method, several power cycling tests were performed on GaN HEMT from three different manufacturers. The main failure mechanism of the GaN HEMT from two manufacturers under power cycling tests is the degradation of solder layer between device and printed circuit board. The main failure mechanism of the devices from the third manufacturer is bond wire lift-off. In GaN the piezoelectric effect is involved in the formation of the 2DEG, and electrical characteristics are sensitive to compressive and tensile stress. The question is whether repetitive deformation leads to new failure mechanisms compared to Si devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Uemoto, Y., Hikita, M., Ueno, H., Matsuo, H., Ishida, H., Yanagihara, M., Ueda, T., Tanaka, T., & Ueda, D. (2007) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2007.908601 · Cited by 1,038 · cited 1×
“After presentation of gate structures for normally-off condition in [3] and [4], another promising way for temperature measurement is the use of the pn-junction of enhancement mode GIT HEMTs with p-gate [5].”
Method
Cited by
Stability, Reliability, and Robustness of GaN Power Devices: A Review
Kozak, J. P., Zhang, R., Porter, M., Song, Q., Liu, J., Wang, B., Wang, R., Saito, W., & Zhang, Y. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3266365 · Cited by 441
Power Electronics Reliability: State of the Art and Outlook
Wang, H., & Blaabjerg, F. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3037161 · Cited by 218
Investigation of Performance Degradation in 600-V HD-GITs Under Power Cycling Tests
Huang, X., Sun, P., He, Z., Lu, G., Du, X., & Luo, Q. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3213550 · Cited by 10
A Multi-Currents Method for Junction Temperature Separation of Cascode GaN
Wu, L., Deng, E., Wang, Y., Xu, S., Hua, W., Yang, S., & Ding, L. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3424893 · Cited by 3
“For GaN power electronics, existing electrical parameters for junction temperature measurement [10] include on-resistance [11], gate threshold voltage [12], turn-OFF delay time [13], and thermal resistance, and so on.”
Background
Metadata
- Authors
- Franke, J., Zeng, G., Winkler, T., & Lutz, J.
- Venue
- 2018 IEEE 30th International Symposium on Power Semiconductor Devices and ICs (ISPSD)
- Publisher
- IEEE
- Published
- 2018-05
- Pages
- 467-470
- ISSN
- 1063-6854 (ISSN-L)
- OpenAlex
- W2811373228
- Cited by
- 50
- References
- 1
- FWCI
- 13.22
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Power cycling reliability results of GaN HEMT devices. https://app.cochat.ai/papers/10.1109/ispsd.2018.8393704
- The paper
- Franke, J., Zeng, G., Winkler, T., & Lutz, J. (2018). Power cycling reliability results of GaN HEMT devices. 2018 IEEE 30th International Symposium on Power Semiconductor Devices and ICs (ISPSD). https://doi.org/10.1109/ispsd.2018.8393704
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.