The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Condition monitoring techniques for electrical equipment-a literature survey
Abstract
Increasing interest has been seen in condition monitoring (CM) techniques for electrical equipment, mainly including transformer, generator, and induction motor in power plants, because CM has the potential to reduce operating costs, enhance the reliability of operation, and improve power supply and service to customers. Literatures are accumulated on developing intelligent CM systems with advanced practicability, sensitivity, reliability and automation. A literature survey is felt necessary with an aim to reflect the state of the art development in this important area. After introducing the concepts and functions of CM, this paper describes the popular monitoring methods for and research status of CM on transformer, generator, and induction motor, respectively. The paper also points out the potential benefits through the utilization of advanced signal processing and artificial intelligence techniques in developing novel CM schemes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartheld, R. G. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345491 · Cited by 638
Benbouzid, M. E. H., Vieira, M., & Theys, C. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.737588 · Cited by 378
Condition monitoring of electrical machines
Tavner, P., & Penman, J. (1987) · Durham Research Online (Durham University) · Cited by 353
Paya, B. A., Esat, I. I., & Badi, M. N. M. (1997) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1997.0090 · Cited by 327
Inter-turn stator winding fault diagnosis in three-phase induction motors, by Park's vector approach
Marques Cardoso, A. J., Cruz, S. M. A., & Fonseca, D. S. B. (1999) · IEEE Transactions on Energy Conversion · doi:10.1109/60.790920 · Cited by 315
An unsupervised, on-line system for induction motor fault detection using stator current monitoring
Schoen, R. R., Lin, B. K., Habetler, T. G., Schlag, J. H., & Farag, S. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345492 · Cited by 264
An unsupervised, on-line system for induction motor fault detection using stator current monitoring
Schoen, R. R., Lin, B. K., Habetler, T. G., Schlag, J. H., & Farag, S. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475698 · Cited by 239
Monitoring of defects in induction motors through air-gap torque observation
Hsu, J. S. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.464514 · Cited by 217
Thomson, W. T., & Barbour, A. (1998) · IEEE Transactions on Energy Conversion · doi:10.1109/60.736320 · Cited by 173
Schoen, R. R., & Habetler, T. G. (1997) · IEEE Transactions on Industry Applications · doi:10.1109/28.649970 · Cited by 154
A neural network approach to real-time condition monitoring of induction motors
Chow, M., Mangum, P. M., & Yee, S. O. (1991) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.107100 · Cited by 151
Thomson, W. T., Rankin, D., & Dorrell, D. G. (1999) · IEEE Transactions on Energy Conversion · doi:10.1109/60.815075 · Cited by 147
Schoen, R. R., & Habetler, T. G. (2002) · Conference record · doi:10.1109/ias.1996.557108 · Cited by 143
On the application and design of artificial neural networks for motor fault detection. II
Chow, M., Sharpe, R. N., & Hung, J. C. (1993) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.222640 · Cited by 142
On the application and design of artificial neural networks for motor fault detection. I
Chow, M., Sharpe, R. N., & Hung, J. C. (1993) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.222639 · Cited by 114
Stone, G. C., & Kapler, J. (1998) · IEEE Industry Applications Magazine · doi:10.1109/2943.715501 · Cited by 101
Practical on-line partial discharge tests for turbine generators and motors
Campbell, S. R., Stone, G. C., Sedding, H. G., Klempner, G. S., McDermid, W., & Bussey, R. G. (1994) · IEEE Transactions on Energy Conversion · doi:10.1109/60.300147 · Cited by 95
Application of partial discharge testing to motor and generator stator winding maintenance
Stone, G. C., Sedding, H. G., & Costello, M. J. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.491498 · Cited by 93
Induction motor asymmetrical faults detection using advanced signal processing techniques
Benbouzid, M., Nejjari, H., Beguenane, R., & Vieira, M. (1999) · IEEE Transactions on Energy Conversion · doi:10.1109/60.766963 · Cited by 82
Classification of the rotating machine condition using artificial neural networks
McCormick, A. C., & Nandi, A. K. (1997) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/0954406971521845 · Cited by 75
Three phase induction machines asymmetrical faults identification using bispectrum
Chow, T. W. S., & Fei, G. (1995) · IEEE Transactions on Energy Conversion · doi:10.1109/60.475840 · Cited by 74
Three state-of-the-art methods for condition monitoring
Grimmelius, H. T., Meiler, P. P., Maas, H. L. M. M., et al. (1999) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.753780 · Cited by 69
Watson, J. F., & Dorrell, D. G. (1999) · IEEE Transactions on Energy Conversion · doi:10.1109/60.790931 · Cited by 63
Extracting useful higher order features for condition monitoring using artificial neural networks
Murray, A., & Penman, J. (1997) · IEEE Transactions on Signal Processing · doi:10.1109/78.650108 · Cited by 49
A new adaptive technique for on-line partial discharge monitoring
Khan, S. Z., Deheng, Z., Xianhe, J., & Tan, K. (1995) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/94.407034 · Cited by 34
Altug, S., Chow, M., & Trussell, H. J. (1999) · IEEE Transactions on Fuzzy Systems · doi:10.1109/91.755397 · Cited by 22
Condition monitoring applied to power transformers - an REC experience
Steed, J. (1997) · doi:10.1049/ic:19970497 · Cited by 17
Kemp, I. J., Zhu, H., Sedding, H. G., Wood, J. W., & Hogg, W. K. (1996) · IEE Proceedings - Science Measurement and Technology · doi:10.1049/ip-smt:19960021 · Cited by 13
Lucas, M., & Thomson, W. T. (1998) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/0954406981521042 · Cited by 5
Cited by
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278
An overview of time-based and condition-based maintenance in industrial application
Ahmad, R., & Kamaruddin, S. (2012) · Computers & Industrial Engineering · doi:10.1016/j.cie.2012.02.002 · Cited by 968
Smart Transmission Grid: Vision and Framework
Li, F., Qiao, W., Sun, H., Wan, H., Wang, J., Xia, Y., Xu, Z., & Zhang, P. (2010) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2010.2053726 · Cited by 961
Review of condition monitoring of rotating electrical machines
Tavner, P. J. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070280 · Cited by 531
A Review of Data-Driven Decision-Making Methods for Industry 4.0 Maintenance Applications
Bousdekis, A., Lepenioti, K., Apostolou, D., & Mentzas, G. (2021) · Electronics · doi:10.3390/electronics10070828 · Cited by 334
Metadata
- Authors
- Han, Y., & Song, Y. H.
- Venue
- IEEE Transactions on Power Delivery
- Published
- 2003-01
- Volume
- 18
- Issue
- 1
- Pages
- 4-13
- ISSN
- 0885-8977 (ISSN-L)
- OpenAlex
- W2101260915
- Cited by
- 381
- References
- 30
- FWCI
- 6.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.