DC Fault Control and High-Speed Switch Design for an HVDC Network Protection Based on Fault-Blocking Converters
The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Abstract
Future multi-terminal dc networks are envisioned for the large-scale integration of renewable energy sources into today's power systems. An essential aspect for the reliable operation of these systems is the fast and selective dc-side fault handling and separation of faulted lines. The objective of this paper is the development and evaluation of a multi-terminal dc protection strategy based on fault-blocking converters (e.g., full-bridge based modular multi-level converters) and high-speed switches. Both a suitable fault control and a new high-speed switch design for a fast separation of faulted dc lines are elaborated. The novel concept is intended to reduce the requirements on the high-speed switches compared to dc circuit breakers and to ensure a fast restoration of the active power transmission capability, as well as the dc voltage. The fault-clearing strategy is analyzed using electromagnetic transient (EMT) simulations under variation of the fault location, type, and resistance. The investigations are carried out in a cable-based multi-terminal HVdc system with full-bridge modular multi-level converters in symmetrical monopole configuration.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Technical Assessment of Load Commutation Switch in Hybrid HVDC Breaker
Hassanpoor, A., Hafner, J., & Jacobson, B. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2372815 · Cited by 334
HVDC Grids: For Offshore and Supergrid of the Future
(2016) · Wiley eBooks · doi:10.1002/9781119115243 · Cited by 266
Nguyen, T. H., Hosani, K. A., Moursi, M. S. E., & Blaabjerg, F. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2862247 · Cited by 173
Low-Energy Protection System for DC Grids Based on Full-Bridge MMC Converters
Jovcic, D., Lin, W., Nguefeu, S., & Saad, H. (2018) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2018.2791635 · Cited by 75
Classification of Fault Clearing Strategies for HVDC Grids
Leterme, W., & Hertem, D. V. (2015) · Lirias · Cited by 69
Progressive Fault Isolation and Grid Restoration Strategy for MTDC Networks
Dantas, R., Liang, J., Ugalde‐Loo, C. E., et al. (2017) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2017.2720844 · Cited by 65
Application of multilevel full bridge converters in HVDC multiterminal systems
Petino, C., Heidemann, M., Eichhoff, D., Stumpe, M., Spahić, E., & Schettler, F. (2016) · IET Power Electronics · doi:10.1049/iet-pel.2015.0515 · Cited by 53
Stumpe, M., Ruffing, P., Wagner, P. H., et al. (2017) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2017.2706361 · Cited by 40
Self-citationHybrid HVDC breaker - Technology and applications in point-to-point connections and DC grids
Derakhshanfar, R., Steiger, U., & Habert, M. (2014) · Cited by 24
DC fault phenomena and DC grid protection
Leterme, W., & Hertem, D. V. (2016) · Wiley eBooks · doi:10.1002/9781119115243.ch17 · Cited by 22
Research works printed but not linked: 10
- 0, HVDC grid systems - Guideline and parameter lists for functional specifications, Proc CENELEC, 37
- 2018, Technische Regeln für den Anschluss von HGÜ-Systemen und Aber HGÜ-Systeme angeschlossene Erzeugungsanlagen
- 0, Commission Regulation (EU) 2016|1447: Establishing a network code on requirements for grid connection of high voltage direct current systems and direct current-connected power park modules, Proc Eur Commission, 12
- 2014, Guide for the Development of Models for HVDC Converters in a HVDC Grid Technical Brochure 604 Cigré
- 0, Ten-year network development plan 2016 - Executive report, Proc ENTSO-E, 42
- nghiem, 0, Wind energy in Europe: Scenarios for 2030, Proc Wind Europe, 19
- 2018, Stak Pak IGBT module - 5SNA 3000K452300
- 2018, Asymmetric Integrated Gate Commutated Thyristor 5SHY 35L4510
- 2017, Brochure 683 - Technical Requirements and Specifications of State-of-the-Art HVDC Switching Equipment
- skarby, 0, An ultra-fast disconnecting switch for a hybrid HVDC Breaker – a technical breakthrough, Proc CIGRÉ Canada Conf, 1
Cited by
Modular Multilevel Converters: Recent Achievements and Challenges
Perez, M. A., Ceballos, S., Konstantinou, G., Pou, J., & Aguilera, R. P. (2021) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2021.3060791 · Cited by 327
“submodules in the MMC the fault current can be drastically reduced [119].”
Background
Metadata
- Authors
- Ruffing, P., Collath, N., Brantl, C., & Schnettler, A.
- Affiliations
- RWTH Aachen University (DE)
- Venue
- IEEE Transactions on Power Delivery
- Published
- 2019-02
- Volume
- 34
- Issue
- 1
- Pages
- 397-406
- ISSN
- 0885-8977 (ISSN-L)
- 1937-4208
- OpenAlex
- W2903103534
- Cited by
- 48
- References
- 17
- Citations by year
- 2026: 3 · 2025: 4 · 2024: 1 · 2023: 2 · 2022: 7 · 2021: 9 · 2020: 15 · 2019: 7
- FWCI
- 2.97
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Power Delivery (publishedVersion)
- RWTH Publications (RWTH Aachen) (submittedVersion)
- Funders
- Horizon 2020 Framework Programme (691714)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Control and Systems Engineering › Power Systems Fault Detection
- Keywords
- fault control, high-speed switches, full-bridge converter, multi-terminal HVDC, fault separation, electromagnetic transients, renewable energy integration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: DC Fault Control and High-Speed Switch Design for an HVDC Network Protection Based on Fault-Blocking Converters. https://app.cochat.ai/papers/10.1109/tpwrd.2018.2883861
- The paper
- Ruffing, P., Collath, N., Brantl, C., & Schnettler, A. (2019). DC Fault Control and High-Speed Switch Design for an HVDC Network Protection Based on Fault-Blocking Converters. IEEE Transactions on Power Delivery. https://doi.org/10.1109/tpwrd.2018.2883861
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.